From: Takashi Iwai <tiwai@suse.de>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: broonie@kernel.org, spapothi@codeaurora.org,
bgoswami@codeaurora.org, plai@codeaurora.org,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
lgirdwood@gmail.com, Vidyakumar Athota <vathota@codeaurora.org>
Subject: Re: [PATCH v2 1/4] ALSA: pcm: add support for 352.8KHz and 384KHz sample rate
Date: Thu, 22 Aug 2019 12:12:36 +0200 [thread overview]
Message-ID: <s5h5zmpv78r.wl-tiwai@suse.de> (raw)
In-Reply-To: <20190822095653.7200-2-srinivas.kandagatla@linaro.org>
On Thu, 22 Aug 2019 11:56:50 +0200,
Srinivas Kandagatla wrote:
>
> From: Vidyakumar Athota <vathota@codeaurora.org>
>
> Most of the modern codecs supports 352.8KHz and 384KHz sample rates.
> Currenlty HW params fails to set 352.8Kz and 384KHz sample rate
> as these are not in known rates list.
> Add these new rates to known list to allow them.
>
> This patch also adds defines in pcm.h so that drivers can use it.
>
> Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
> Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
About this API change:
Reviewed-by: Takashi Iwai <tiwai@suse.de>
thanks,
Takashi
> ---
> include/sound/pcm.h | 5 +++++
> sound/core/pcm_native.c | 2 +-
> 2 files changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/include/sound/pcm.h b/include/sound/pcm.h
> index 1e9bb1c91770..bbe6eb1ff5d2 100644
> --- a/include/sound/pcm.h
> +++ b/include/sound/pcm.h
> @@ -117,6 +117,8 @@ struct snd_pcm_ops {
> #define SNDRV_PCM_RATE_96000 (1<<10) /* 96000Hz */
> #define SNDRV_PCM_RATE_176400 (1<<11) /* 176400Hz */
> #define SNDRV_PCM_RATE_192000 (1<<12) /* 192000Hz */
> +#define SNDRV_PCM_RATE_352800 (1<<13) /* 352800Hz */
> +#define SNDRV_PCM_RATE_384000 (1<<14) /* 384000Hz */
>
> #define SNDRV_PCM_RATE_CONTINUOUS (1<<30) /* continuous range */
> #define SNDRV_PCM_RATE_KNOT (1<<31) /* supports more non-continuos rates */
> @@ -129,6 +131,9 @@ struct snd_pcm_ops {
> SNDRV_PCM_RATE_88200|SNDRV_PCM_RATE_96000)
> #define SNDRV_PCM_RATE_8000_192000 (SNDRV_PCM_RATE_8000_96000|SNDRV_PCM_RATE_176400|\
> SNDRV_PCM_RATE_192000)
> +#define SNDRV_PCM_RATE_8000_384000 (SNDRV_PCM_RATE_8000_192000|\
> + SNDRV_PCM_RATE_352800|\
> + SNDRV_PCM_RATE_384000)
> #define _SNDRV_PCM_FMTBIT(fmt) (1ULL << (__force int)SNDRV_PCM_FORMAT_##fmt)
> #define SNDRV_PCM_FMTBIT_S8 _SNDRV_PCM_FMTBIT(S8)
> #define SNDRV_PCM_FMTBIT_U8 _SNDRV_PCM_FMTBIT(U8)
> diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
> index 703857aab00f..11e653c8aa0e 100644
> --- a/sound/core/pcm_native.c
> +++ b/sound/core/pcm_native.c
> @@ -2170,7 +2170,7 @@ static int snd_pcm_hw_rule_sample_bits(struct snd_pcm_hw_params *params,
>
> static const unsigned int rates[] = {
> 5512, 8000, 11025, 16000, 22050, 32000, 44100,
> - 48000, 64000, 88200, 96000, 176400, 192000
> + 48000, 64000, 88200, 96000, 176400, 192000, 352800, 384000
> };
>
> const struct snd_pcm_hw_constraint_list snd_pcm_known_rates = {
> --
> 2.21.0
>
next prev parent reply other threads:[~2019-08-22 10:12 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-22 9:56 [PATCH v2 0/4] " Srinivas Kandagatla
2019-08-22 9:56 ` [PATCH v2 1/4] " Srinivas Kandagatla
2019-08-22 10:12 ` Takashi Iwai [this message]
2019-08-28 13:13 ` Applied "ALSA: pcm: add support for 352.8KHz and 384KHz sample rate" to the asoc tree Mark Brown
2019-08-22 9:56 ` [PATCH v2 2/4] ASoC: wcd9335: Fix primary interpolator max rate Srinivas Kandagatla
2019-08-28 13:13 ` Applied "ASoC: wcd9335: Fix primary interpolator max rate" to the asoc tree Mark Brown
2019-08-22 9:56 ` [PATCH v2 3/4] ASoC: qdsp6: q6afe-dai: Update max rate for slim and tdm dais Srinivas Kandagatla
2019-08-22 10:09 ` Takashi Iwai
2019-08-22 10:45 ` Srinivas Kandagatla
2019-08-22 10:53 ` Mark Brown
2019-08-22 9:56 ` [PATCH v2 4/4] ASoC: qdsp6: q6asm-dai: fix max rates on q6asm dais Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h5zmpv78r.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=plai@codeaurora.org \
--cc=spapothi@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=vathota@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®