From: Takashi Iwai <tiwai@suse.de>
To: Daniel Exner <dex@dragonslave.de>
Cc: "Subhransu S. Prusty" <subhransu.s.prusty@intel.com>,
Vinod Koul <vinod.koul@intel.com>,
linux-kernel@vger.kernel.org
Subject: Re: Regression: Kernel 4.6 DisplayPort Audio
Date: Wed, 11 May 2016 15:09:23 +0200 [thread overview]
Message-ID: <s5h8tzgg2rg.wl-tiwai@suse.de> (raw)
In-Reply-To: <ff3c8816-1fc2-e307-3d16-8de5450e6c8b@dragonslave.de>
On Wed, 11 May 2016 14:52:22 +0200,
Daniel Exner wrote:
>
> Hi,
>
> Am 11.05.2016 um 10:48 schrieb Takashi Iwai:
> [..]
>
> > If the commit above alone breaks, does the patch below change the
> > behavior? Through a quick look at it, some ops are overridden only
> > conditionally while the older code always overwrote them.
>
> Yes, the patch fixes it. Thanks!
> I hope its possible to include that in 4.6.
Good to hear!
FWIW, below is the proper patch I'm going to queue.
thanks,
Takashi
-- 8< --
From: Takashi Iwai <tiwai@suse.de>
Subject: [PATCH] ALSA: hda - Fix regression on ATI HDMI audio
The HDMI/DP audio output on ATI/AMD chips got broken due to the recent
restructuring of chmap. Fortunately, Daniel Exner could bisect, and
pointed the culprit commit [739ffee97ed5: ALSA: hda - Add hdmi chmap
verb programming ops to chmap object].
This commit moved some ops from hdmi_ops to chmap_ops, and reassigned
the ops in the embedded chmap object in hdmi_spec instead.
Unfortunately, the reassignment of these ops in patch_atihdmi() were
moved into an if block that is performed only for old chips. Thus, on
newer chips, the generic ops is still used, which doesn't work for
such ATI/AMD chips.
This patch addresses the regression, simply by moving the assignment
of chmap ops to the right place.
Fixes: 739ffee97ed5 ('ALSA: hda - Add hdmi chmap verb programming ops to chmap object')
Reported-and-tested-by: Daniel Exner <dex@dragonslave.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
sound/pci/hda/patch_hdmi.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 1483f85999ec..a010d704e0e2 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -3401,6 +3401,9 @@ static int patch_atihdmi(struct hda_codec *codec)
spec->ops.pin_hbr_setup = atihdmi_pin_hbr_setup;
spec->ops.setup_stream = atihdmi_setup_stream;
+ spec->chmap.ops.pin_get_slot_channel = atihdmi_pin_get_slot_channel;
+ spec->chmap.ops.pin_set_slot_channel = atihdmi_pin_set_slot_channel;
+
if (!has_amd_full_remap_support(codec)) {
/* override to ATI/AMD-specific versions with pairwise mapping */
spec->chmap.ops.chmap_cea_alloc_validate_get_type =
@@ -3408,10 +3411,6 @@ static int patch_atihdmi(struct hda_codec *codec)
spec->chmap.ops.cea_alloc_to_tlv_chmap =
atihdmi_paired_cea_alloc_to_tlv_chmap;
spec->chmap.ops.chmap_validate = atihdmi_paired_chmap_validate;
- spec->chmap.ops.pin_get_slot_channel =
- atihdmi_pin_get_slot_channel;
- spec->chmap.ops.pin_set_slot_channel =
- atihdmi_pin_set_slot_channel;
}
/* ATI/AMD converters do not advertise all of their capabilities */
--
2.8.2
prev parent reply other threads:[~2016-05-11 13:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 8:32 Daniel Exner
2016-05-11 8:48 ` Takashi Iwai
2016-05-11 12:52 ` Daniel Exner
2016-05-11 13:09 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h8tzgg2rg.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=dex@dragonslave.de \
--cc=linux-kernel@vger.kernel.org \
--cc=subhransu.s.prusty@intel.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®