From: Takashi Iwai <tiwai@suse.de>
To: Luis Henriques <luis.henriques@canonical.com>
Cc: alsa-devel@alsa-project.org, lkml <linux-kernel@vger.kernel.org>
Subject: Re: [Regression] No sound on HP Pavilion dv6, STAC92xx
Date: Wed, 27 Jun 2012 11:44:42 +0200 [thread overview]
Message-ID: <s5h8vf9t7g5.wl%tiwai@suse.de> (raw)
In-Reply-To: <87zk7pyvc8.fsf@canonical.com>
At Wed, 27 Jun 2012 10:09:43 +0100,
Luis Henriques wrote:
>
> Hi,
>
> Takashi Iwai <tiwai@suse.de> writes:
>
> > Below is the patch for 3.4 and older.
> >
>
> Just to let you know that we are receiving positive feedback on this
> patch from the bug reporters.
>
> I believe you plan to Cc: this patch to -stable, right? We had this
> issue reported against 3.2.y.
It's not Cc'ed because it cannot be cherry-picked. I'll post the
patch to stable ML once after the upstream fix is merged to Linus
tree.
thanks,
Takashi
>
> Cheers,
> --
> Luis
>
> > Takashi
> >
> > ---
> > From: Takashi Iwai <tiwai@suse.de>
> > Subject: [PATCH] ALSA: hda - Fix power-map regression for HP dv6 & co
> >
> > commit 6e1c39c6b00d9141a82c231ba7c5e5b1716974b2 upstream.
> >
> > The recent fix for power-map controls (commit b0791dda813) caused
> > regressions on some other HP laptops. They have fixed pins but these
> > pins are exposed as jack-detectable. Thus the driver tries to control
> > the power-map dynamically per jack detection where it never gets on.
> >
> > This patch corrects the condition check for fixed pins so that the
> > power-map is set always for these pins.
> >
> > NOTE: this is no simple backport from 3.5 kernel. Since 3.5 kernel
> > had significant code change in the relevant part, I had to fix this
> > differently.
> >
> > BugLink: http://bugs.launchpad.net/bugs/1013183
> > Reported-by: Luis Henriques <luis.henriques@canonical.com>
> > Signed-off-by: Takashi Iwai <tiwai@suse.de>
> > ---
> > sound/pci/hda/patch_sigmatel.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
> > index 7b7a516..2b973f5 100644
> > --- a/sound/pci/hda/patch_sigmatel.c
> > +++ b/sound/pci/hda/patch_sigmatel.c
> > @@ -4457,7 +4457,7 @@ static int stac92xx_init(struct hda_codec *codec)
> > AC_PINCTL_IN_EN);
> > for (i = 0; i < spec->num_pwrs; i++) {
> > hda_nid_t nid = spec->pwr_nids[i];
> > - int pinctl, def_conf;
> > + unsigned int pinctl, def_conf;
> >
> > /* power on when no jack detection is available */
> > /* or when the VREF is used for controlling LED */
> > @@ -4484,7 +4484,7 @@ static int stac92xx_init(struct hda_codec *codec)
> > def_conf = get_defcfg_connect(def_conf);
> > /* skip any ports that don't have jacks since presence
> > * detection is useless */
> > - if (def_conf != AC_JACK_PORT_NONE &&
> > + if (def_conf != AC_JACK_PORT_COMPLEX ||
> > !is_jack_detectable(codec, nid)) {
> > stac_toggle_power_map(codec, nid, 1);
> > continue;
>
next prev parent reply other threads:[~2012-06-27 9:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-26 14:13 Luis Henriques
2012-06-26 14:16 ` Takashi Iwai
2012-06-26 14:27 ` Luis Henriques
2012-06-26 14:35 ` Takashi Iwai
2012-06-26 15:10 ` Takashi Iwai
2012-06-26 15:52 ` Takashi Iwai
2012-06-26 15:54 ` Takashi Iwai
2012-06-27 9:09 ` Luis Henriques
2012-06-27 9:44 ` Takashi Iwai [this message]
2012-06-26 16:02 ` Luis Henriques
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h8vf9t7g5.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luis.henriques@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®