From: Takashi Iwai <tiwai@suse.de>
To: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Cc: Jaroslav Kysela <perex@perex.cz>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/6] sound/pci/hda: CX20549 cleanup/fixes
Date: Sat, 07 Apr 2012 12:34:40 +0200 [thread overview]
Message-ID: <s5h8vi7x22n.wl%tiwai@suse.de> (raw)
In-Reply-To: <1333717307.4159.28.camel@localhost>
At Fri, 06 Apr 2012 15:01:47 +0200,
Michael Karcher wrote:
>
> On Thu, 2012-04-05 at 16:28 +0200, Takashi Iwai wrote:
> > BTW, did you try model=auto option to enable the auto-parser?
> > If it doesn't work well for you, let me know.
>
> I tried the model=auto option, too. It works mostly, but the mixer node
> seems to not be utilized correctly/at all. The capture source list does
> not contain "mixer" anymore, and there are no playback controls for
> Internal Mic/Mic/Line.
Right, the analog loopback is dropped in the auto-parser for
simplicity.
> The Capture setup seems to be built correctly
> (except for the missing mixer). The auto setup adds two extra input
> devices for jack sense.
>
> > In anyway, give alsa-info.sh output (run with --no-upload option) for
> > better checks.
>
> alsa-info for the revised patch-set (mailed soon) with and without
> model=auto is attached. Information I consider irrelevant (non-sound
> modules and dmesg context not relating to sound) has been edited out.
Thanks.
> BTW: I seem to have encountered an ALSA user-space bug: The codec
> provides a "master capture switch", i.e. the "mute" of the adc in amp.
> It also provides a "capture source selection enum", i.e. the "Connection
> Select" of the adc widget. The enum provides mutually exclusive capture
> sources that have no volume control, whilst the master capture switch is
> coupled with the capture volume control, and should not be related to
> the source enumeration. But if I play around with capture sources in
> alsamixer, the "Capture Switch" is turned off as soon as I switch the
> source from the first item in the Mux list to something else.
This sounds like a bug in alsa-lib mixer abstraction.
There is a known shortcomings in the "capture source" enum, e.g. it
can't take more than one ADCs.
> This happens with both the patched hard-coded "BenQ" configuration and
> the auto configuration.
OK, I'll check it in the next week.
thanks,
Takashi
next prev parent reply other threads:[~2012-04-07 10:34 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-05 13:29 Michael Karcher
2012-04-05 14:27 ` Takashi Iwai
2012-04-05 14:28 ` Takashi Iwai
2012-04-06 13:01 ` Michael Karcher
2012-04-07 10:34 ` Takashi Iwai [this message]
2012-04-06 13:34 ` [PATCH 0/6] ALSA: hda - " Michael Karcher
2012-04-06 13:34 ` [PATCH 1/6] ALSA: hda - Fix proc output for ADC amp values of CX20549 Michael Karcher
2012-04-06 13:34 ` [PATCH 2/6] ALSA: hda - Rename capture sources of CX20549 to match common conventions Michael Karcher
2012-04-06 13:34 ` [PATCH 3/6] ALSA: hda - fix record volume controls of CX20459 ("Venice") Michael Karcher
2012-04-06 13:34 ` [PATCH 4/6] ALSA: hda - Remove CD control from model=benq for CX20549 Michael Karcher
2012-04-06 13:34 ` [PATCH 5/6] ALSA: hda - CX20549 doesn't need pin_amp_workaround Michael Karcher
2012-04-06 13:34 ` [PATCH 6/6] ALSA: hda - clean up CX20549 test mixer setup Michael Karcher
2012-04-10 6:54 ` David Henningsson
2012-04-10 12:59 ` Takashi Iwai
2012-04-07 10:36 ` [PATCH 0/6] ALSA: hda - CX20549 cleanup/fixes Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h8vi7x22n.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=kernel@mkarcher.dialup.fu-berlin.de \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®