mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Masanari Iida <standby24x7@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
	linux-kernel@vger.kernel.org, trivial@kernel.org, perex@perex.cz,
	alsa-devel@alsa-project.org
Subject: Re: [alsa-devel] [PATCH] [trivial] sound: Fix typo in drivers sound
Date: Sun, 04 Nov 2012 09:23:17 +0100	[thread overview]
Message-ID: <s5ha9uxsrnu.wl%tiwai@suse.de> (raw)
In-Reply-To: <1351783730-24714-1-git-send-email-standby24x7@gmail.com>

At Fri,  2 Nov 2012 00:28:50 +0900,
Masanari Iida wrote:
> 
> Correct spelling typo in debug messages within drivers/sound
> 
> Signed-off-by: Masanari Iida <standby24x7@gmail.com>

Thanks, applied now.

Mark, this patch contains a couple of typo fixes.  I applied it as is
(to for-linus branch) since ASoC changes here are just typos in kernel
messages.


Takashi

> ---
>  sound/i2c/other/ak4113.c   | 2 +-
>  sound/i2c/other/ak4114.c   | 2 +-
>  sound/i2c/other/ak4117.c   | 2 +-
>  sound/pci/rme9652/hdspm.c  | 2 +-
>  sound/soc/codecs/cs42l52.c | 2 +-
>  sound/soc/codecs/wm8994.c  | 2 +-
>  6 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/sound/i2c/other/ak4113.c b/sound/i2c/other/ak4113.c
> index ef68d71..e04e750 100644
> --- a/sound/i2c/other/ak4113.c
> +++ b/sound/i2c/other/ak4113.c
> @@ -426,7 +426,7 @@ static struct snd_kcontrol_new snd_ak4113_iec958_controls[] = {
>  },
>  {
>  	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
> -	.name =		"IEC958 Preample Capture Default",
> +	.name =		"IEC958 Preamble Capture Default",
>  	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
>  		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
>  	.info =		snd_ak4113_spdif_pinfo,
> diff --git a/sound/i2c/other/ak4114.c b/sound/i2c/other/ak4114.c
> index 816e7d2..5bf4fca 100644
> --- a/sound/i2c/other/ak4114.c
> +++ b/sound/i2c/other/ak4114.c
> @@ -401,7 +401,7 @@ static struct snd_kcontrol_new snd_ak4114_iec958_controls[] = {
>  },
>  {
>  	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
> -	.name =		"IEC958 Preample Capture Default",
> +	.name =		"IEC958 Preamble Capture Default",
>  	.access =	SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
>  	.info =		snd_ak4114_spdif_pinfo,
>  	.get =		snd_ak4114_spdif_pget,
> diff --git a/sound/i2c/other/ak4117.c b/sound/i2c/other/ak4117.c
> index b4b2a51..40e33c9 100644
> --- a/sound/i2c/other/ak4117.c
> +++ b/sound/i2c/other/ak4117.c
> @@ -380,7 +380,7 @@ static struct snd_kcontrol_new snd_ak4117_iec958_controls[] = {
>  },
>  {
>  	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
> -	.name =		"IEC958 Preample Capture Default",
> +	.name =		"IEC958 Preamble Capture Default",
>  	.access =	SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
>  	.info =		snd_ak4117_spdif_pinfo,
>  	.get =		snd_ak4117_spdif_pget,
> diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
> index f1cd1e3..9a8d5ce 100644
> --- a/sound/pci/rme9652/hdspm.c
> +++ b/sound/pci/rme9652/hdspm.c
> @@ -4899,7 +4899,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry,
>  		insel = "Coaxial";
>  		break;
>  	default:
> -		insel = "Unkown";
> +		insel = "Unknown";
>  	}
>  
>  	snd_iprintf(buffer,
> diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c
> index 6159929..4d8db36 100644
> --- a/sound/soc/codecs/cs42l52.c
> +++ b/sound/soc/codecs/cs42l52.c
> @@ -763,7 +763,7 @@ static int cs42l52_set_sysclk(struct snd_soc_dai *codec_dai,
>  	if ((freq >= CS42L52_MIN_CLK) && (freq <= CS42L52_MAX_CLK)) {
>  		cs42l52->sysclk = freq;
>  	} else {
> -		dev_err(codec->dev, "Invalid freq paramter\n");
> +		dev_err(codec->dev, "Invalid freq parameter\n");
>  		return -EINVAL;
>  	}
>  	return 0;
> diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
> index 11982bf..88dbabc 100644
> --- a/sound/soc/codecs/wm8994.c
> +++ b/sound/soc/codecs/wm8994.c
> @@ -3734,7 +3734,7 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data)
>  	} while (count--);
>  
>  	if (count == 0)
> -		dev_warn(codec->dev, "No impedence range reported for jack\n");
> +		dev_warn(codec->dev, "No impedance range reported for jack\n");
>  
>  #ifndef CONFIG_SND_SOC_WM8994_MODULE
>  	trace_snd_soc_jack_irq(dev_name(codec->dev));
> -- 
> 1.8.0.rc3.16.g8ead1bf
> 
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> 

      reply	other threads:[~2012-11-04  8:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-01 15:28 Masanari Iida
2012-11-04  8:23 ` Takashi Iwai [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5ha9uxsrnu.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=standby24x7@gmail.com \
    --cc=trivial@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®