From: Takashi Iwai <tiwai@suse.de>
To: "Elena Reshetova" <elena.reshetova@intel.com>
Cc: <linux-kernel@vger.kernel.org>, <alsa-devel@alsa-project.org>,
"Kees Cook" <keescook@chromium.org>,
"David Windsor" <dwindsor@gmail.com>,
"Hans Liljestrand" <ishkamiel@gmail.com>, <peterz@infradead.org>,
<gregkh@linuxfoundation.org>, <perex@perex.cz>
Subject: Re: [PATCH] sound: convert snd_seq_subscribers.ref_count from atomic_t to refcount_t
Date: Thu, 23 Feb 2017 15:55:58 +0100 [thread overview]
Message-ID: <s5hbmtt6jnl.wl-tiwai@suse.de> (raw)
In-Reply-To: <1487690830-30277-1-git-send-email-elena.reshetova@intel.com>
On Tue, 21 Feb 2017 16:27:10 +0100,
Elena Reshetova wrote:
>
> refcount_t type and corresponding API should be
> used instead of atomic_t when the variable is used as
> a reference counter. This allows to avoid accidental
> refcounter overflows that might lead to use-after-free
> situations.
Well, in this case, it cannot overflow since the highest refcount is
2, as you already figured out.
Takashi
>
> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
> Signed-off-by: Kees Cook <keescook@chromium.org>
> Signed-off-by: David Windsor <dwindsor@gmail.com>
> ---
> sound/core/seq/seq_clientmgr.c | 2 +-
> sound/core/seq/seq_ports.c | 7 +++----
> sound/core/seq/seq_ports.h | 3 ++-
> 3 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c
> index 4c93520..3440f76 100644
> --- a/sound/core/seq/seq_clientmgr.c
> +++ b/sound/core/seq/seq_clientmgr.c
> @@ -666,7 +666,7 @@ static int deliver_to_subscribers(struct snd_seq_client *client,
> down_read(&grp->list_mutex);
> list_for_each_entry(subs, &grp->list_head, src_list) {
> /* both ports ready? */
> - if (atomic_read(&subs->ref_count) != 2)
> + if (refcount_read(&subs->ref_count) != 2)
> continue;
> event->dest = subs->info.dest;
> if (subs->info.flags & SNDRV_SEQ_PORT_SUBS_TIMESTAMP)
> diff --git a/sound/core/seq/seq_ports.c b/sound/core/seq/seq_ports.c
> index fe686ee..1ca896b 100644
> --- a/sound/core/seq/seq_ports.c
> +++ b/sound/core/seq/seq_ports.c
> @@ -241,7 +241,7 @@ static void clear_subscriber_list(struct snd_seq_client *client,
> * we decrease the counter, and when both ports are deleted
> * remove the subscriber info
> */
> - if (atomic_dec_and_test(&subs->ref_count))
> + if (refcount_dec_and_test(&subs->ref_count))
> kfree(subs);
> continue;
> }
> @@ -520,7 +520,6 @@ static int check_and_subscribe_port(struct snd_seq_client *client,
> else
> list_add_tail(&subs->dest_list, &grp->list_head);
> grp->exclusive = exclusive;
> - atomic_inc(&subs->ref_count);
> write_unlock_irq(&grp->list_lock);
> err = 0;
>
> @@ -570,7 +569,6 @@ int snd_seq_port_connect(struct snd_seq_client *connector,
> return -ENOMEM;
>
> subs->info = *info;
> - atomic_set(&subs->ref_count, 0);
> INIT_LIST_HEAD(&subs->src_list);
> INIT_LIST_HEAD(&subs->dest_list);
>
> @@ -587,6 +585,7 @@ int snd_seq_port_connect(struct snd_seq_client *connector,
> if (err < 0)
> goto error_dest;
>
> + refcount_set(&subs->ref_count, 2);
> return 0;
>
> error_dest:
> @@ -613,7 +612,7 @@ int snd_seq_port_disconnect(struct snd_seq_client *connector,
> /* look for the connection */
> list_for_each_entry(subs, &src->list_head, src_list) {
> if (match_subs_info(info, &subs->info)) {
> - atomic_dec(&subs->ref_count); /* mark as not ready */
> + refcount_dec(&subs->ref_count); /* mark as not ready */
> err = 0;
> break;
> }
> diff --git a/sound/core/seq/seq_ports.h b/sound/core/seq/seq_ports.h
> index 26bd71f..d09e396 100644
> --- a/sound/core/seq/seq_ports.h
> +++ b/sound/core/seq/seq_ports.h
> @@ -21,6 +21,7 @@
> #ifndef __SND_SEQ_PORTS_H
> #define __SND_SEQ_PORTS_H
>
> +#include <linux/refcount.h>
> #include <sound/seq_kernel.h>
> #include "seq_lock.h"
>
> @@ -44,7 +45,7 @@ struct snd_seq_subscribers {
> struct snd_seq_port_subscribe info; /* additional info */
> struct list_head src_list; /* link of sources */
> struct list_head dest_list; /* link of destinations */
> - atomic_t ref_count;
> + refcount_t ref_count;
> };
>
> struct snd_seq_port_subs_info {
> --
> 2.7.4
>
>
prev parent reply other threads:[~2017-02-23 14:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-21 15:27 Elena Reshetova
2017-02-21 15:42 ` Peter Zijlstra
2017-02-23 14:55 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hbmtt6jnl.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=dwindsor@gmail.com \
--cc=elena.reshetova@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=ishkamiel@gmail.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®