From: Takashi Iwai <tiwai@suse.de>
To: "Ondrej Zary" <linux@rainbow-software.org>
Cc: <alsa-devel@alsa-project.org>,
"Kernel development list" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] snd-maestro3: Enable docking support for Dell Latitude C810
Date: Sun, 01 Nov 2015 17:41:16 +0100 [thread overview]
Message-ID: <s5hd1vtzn83.wl-tiwai@suse.de> (raw)
In-Reply-To: <1446384723-29765-1-git-send-email-linux@rainbow-software.org>
On Sun, 01 Nov 2015 14:32:03 +0100,
Ondrej Zary wrote:
>
> Enable I2S docking for Dell Latitude C810.
> This allows the audio output on C/Port II to work (and probably also
> the audio inputs on C/Dock II).
>
> The volume can't be adjusted - none of the mixer controls currently
> supported affects the I2S output (they belong to the STAC9721/23 AC'97
> codec responsible for the laptop internal connectors & speakers).
>
> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Applied, thanks.
Takashi
> ---
> sound/pci/maestro3.c | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
> index 72e89ce..965d5c6 100644
> --- a/sound/pci/maestro3.c
> +++ b/sound/pci/maestro3.c
> @@ -1932,12 +1932,19 @@ snd_m3_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val)
> }
>
>
> -static void snd_m3_remote_codec_config(int io, int isremote)
> +static void snd_m3_remote_codec_config(struct snd_m3 *chip, int isremote)
> {
> + int io = chip->iobase;
> + u16 tmp;
> +
> isremote = isremote ? 1 : 0;
>
> - outw((inw(io + RING_BUS_CTRL_B) & ~SECOND_CODEC_ID_MASK) | isremote,
> - io + RING_BUS_CTRL_B);
> + tmp = inw(io + RING_BUS_CTRL_B) & ~SECOND_CODEC_ID_MASK;
> + /* enable dock on Dell Latitude C810 */
> + if (chip->pci->subsystem_vendor == 0x1028 &&
> + chip->pci->subsystem_device == 0x00e5)
> + tmp |= M3I_DOCK_ENABLE;
> + outw(tmp | isremote, io + RING_BUS_CTRL_B);
> outw((inw(io + SDO_OUT_DEST_CTRL) & ~COMMAND_ADDR_OUT) | isremote,
> io + SDO_OUT_DEST_CTRL);
> outw((inw(io + SDO_IN_DEST_CTRL) & ~STATUS_ADDR_IN) | isremote,
> @@ -1989,7 +1996,7 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip)
> if (!chip->irda_workaround)
> dir |= 0x10; /* assuming pci bus master? */
>
> - snd_m3_remote_codec_config(io, 0);
> + snd_m3_remote_codec_config(chip, 0);
>
> outw(IO_SRAM_ENABLE, io + RING_BUS_CTRL_A);
> udelay(20);
> --
> Ondrej Zary
>
>
prev parent reply other threads:[~2015-11-01 16:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-01 13:32 Ondrej Zary
2015-11-01 16:41 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hd1vtzn83.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rainbow-software.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®