mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Torsten Kaiser <just.for.lkml@googlemail.com>
Cc: Jaroslav Kysela <perex@perex.cz>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: Re: Regressions: MSI vs HDA-Intel
Date: Fri, 26 Mar 2010 18:31:22 +0100	[thread overview]
Message-ID: <s5hfx3nm1lh.wl%tiwai@suse.de> (raw)
In-Reply-To: <64bb37e1003261025l14e2d82r64ba1e90d024bea6@mail.gmail.com>

At Fri, 26 Mar 2010 18:25:22 +0100,
Torsten Kaiser wrote:
> 
> I have two systems that use the alsa hda-intel driver, both show
> regressions in relation to MSI.
> 
> System 1: Athlon(tm) X2 BE-2400 with an AMD RS690/SB600 chipset
> 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel
> HDA) [1002:4383]
> (Mainboard is a MSI MS-7368)
> 
> After upgrading from 2.6.31 to 2.6.33 I get a delay during bootup:
> [    1.155925] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> [    1.159143] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input2
> [    1.232595] firewire_core: created device fw0: GUID 00dc10000129c48f, S400
> [    1.252677] hda_codec: ALC888: BIOS auto-probing.
> [    1.259226] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level,
> low) -> IRQ 19
> [    1.260293] HDA Intel 0000:01:05.2: irq 27 for MSI/MSI-X
> [    1.314712] input: GenPS/2 Genius Mouse as
> /devices/platform/i8042/serio1/input/input3
> [    4.322508] hda-intel: azx_get_response timeout, switching to
> polling mode: last cmd=0x000f0000
> [    5.332508] hda-intel: No response from codec, disabling MSI: last
> cmd=0x000f0000
> [    6.342508] hda-intel: Codec #0 probe error; disabling it...
> [    7.392508] hda_intel: azx_get_response timeout, switching to
> single_cmd mode: last cmd=0x000f0000
> [    7.430464] ALSA device list:
> [    7.431549]   #0: HDA ATI SB at 0xfe7f4000 irq 16
> [    7.432656]   #1: HDA ATI HDMI at 0xfe9e8000 irq 27
> 
> 2.6.34-rc2 does not boot on this system, something related to the new
> bootmem allocator, so I can't say if this might already be fixed for
> 2.6.34.
> 
> Should the system be blacklisted like the two Asus Athlon X2 boards,
> or is this some other bug?

If it happens on 2.6.33 and enable_msi=0 solves the issue, then yes,
we should put them on the blacklist.

> System 2: Opteron(tm) 2218 with an nVidia MCP55 chipset
> 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition
> Audio [10de:0371] (rev a2)
> (Mainboard is an ASUS KFN5-D SLI)
> 
> Commit 80c43ed724797627d8f86855248c497a6161a214 disabled MSI for this
> system, but the MSI mode was working fine for all 2.6.33 versions I
> used.
> 
> Should the generic blacklist disable MSI for all Athlon X2 instead of
> all nNvidia chipsets?

Well, it's not clear yet.  I don't bet that non-athlon would have
any problem.  So I keep it still disabled for Nvidia controllers.
You can put it in the whitelist instead.


thanks,

Takashi

  reply	other threads:[~2010-03-26 17:31 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-26 17:25 Torsten Kaiser
2010-03-26 17:31 ` Takashi Iwai [this message]
2010-03-26 17:59   ` Torsten Kaiser
2010-03-26 20:27     ` Takashi Iwai
2010-03-26 21:07       ` Torsten Kaiser
2010-03-26 21:22         ` Takashi Iwai
2010-03-27  9:34           ` Torsten Kaiser
2010-04-01  7:26             ` [alsa-devel] " Clemens Ladisch
2010-04-01 19:15               ` Torsten Kaiser

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hfx3nm1lh.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=just.for.lkml@googlemail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®