From: Takashi Iwai <tiwai@suse.de>
To: Tina Ruchandani <ruchandani.tina@gmail.com>
Cc: arnd@arndb.de, perex@perex.cz, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ALSA: es1968: Replace timeval with ktime_t
Date: Thu, 30 Oct 2014 08:06:10 +0100 [thread overview]
Message-ID: <s5hh9ymc9zx.wl-tiwai@suse.de> (raw)
In-Reply-To: <20141029174810.GA48058@localhost>
At Wed, 29 Oct 2014 10:48:10 -0700,
Tina Ruchandani wrote:
>
> es1968_measure_clock uses struct timeval, which on 32-bit systems will overflow
> in 2038, leading to incorrect interpretation of time.This patch changes the
> function to use ktime_t instead of struct timeval, which implies:
> - no y2038: ktime_t uses a 64-bit datatype explicitly.
> - efficent subtraction: The earlier version computes the difference in usecs
> while dealing with secs and nsecs. It requires checks to see if the nsecs of
> stop is less than start. This patch uses a direct subtract of ktime_t and
> converts to usecs.
> - use of monotonic clock (ktime_get) over real time (do_gettimeofday),
> which simplifies timekeeping, as it does not have to deal with cases
> where stop_time is less than start_time.
>
> Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Applied, thanks.
Takashi
> ---
> sound/pci/es1968.c | 15 ++++++---------
> 1 file changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
> index a9956a7..6039700 100644
> --- a/sound/pci/es1968.c
> +++ b/sound/pci/es1968.c
> @@ -1710,7 +1710,8 @@ static void es1968_measure_clock(struct es1968 *chip)
> int i, apu;
> unsigned int pa, offset, t;
> struct esm_memory *memory;
> - struct timeval start_time, stop_time;
> + ktime_t start_time, stop_time;
> + ktime_t diff;
>
> if (chip->clock == 0)
> chip->clock = 48000; /* default clock value */
> @@ -1761,12 +1762,12 @@ static void es1968_measure_clock(struct es1968 *chip)
> snd_es1968_bob_inc(chip, ESM_BOB_FREQ);
> __apu_set_register(chip, apu, 5, pa & 0xffff);
> snd_es1968_trigger_apu(chip, apu, ESM_APU_16BITLINEAR);
> - do_gettimeofday(&start_time);
> + start_time = ktime_get();
> spin_unlock_irq(&chip->reg_lock);
> msleep(50);
> spin_lock_irq(&chip->reg_lock);
> offset = __apu_get_register(chip, apu, 5);
> - do_gettimeofday(&stop_time);
> + stop_time = ktime_get();
> snd_es1968_trigger_apu(chip, apu, 0); /* stop */
> snd_es1968_bob_dec(chip);
> chip->in_measurement = 0;
> @@ -1777,12 +1778,8 @@ static void es1968_measure_clock(struct es1968 *chip)
> offset &= 0xfffe;
> offset += chip->measure_count * (CLOCK_MEASURE_BUFSIZE/2);
>
> - t = stop_time.tv_sec - start_time.tv_sec;
> - t *= 1000000;
> - if (stop_time.tv_usec < start_time.tv_usec)
> - t -= start_time.tv_usec - stop_time.tv_usec;
> - else
> - t += stop_time.tv_usec - start_time.tv_usec;
> + diff = ktime_sub(stop_time, start_time);
> + t = ktime_to_us(diff);
> if (t == 0) {
> dev_err(chip->card->dev, "?? calculation error..\n");
> } else {
> --
> 2.1.0.rc2.206.gedb03e5
>
prev parent reply other threads:[~2014-10-30 7:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-29 17:48 Tina Ruchandani
2014-10-30 7:06 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hh9ymc9zx.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=ruchandani.tina@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®