From: Takashi Iwai <tiwai@suse.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>, linux-kernel@vger.kernel.org
Subject: [GIT PULL] sound fixes
Date: Wed, 17 Mar 2010 09:07:14 +0100 [thread overview]
Message-ID: <s5hhbofgyml.wl%tiwai@suse.de> (raw)
Linus,
please pull ALSA updates for v2.6.34-rc2 from:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-linus
containing the following fixes. Most of them are one- (or a few) liners.
Thanks!
Takashi
===
Anisse Astier (1):
ALSA: hda - Add PCI quirks for MSI NetOn AP1900 and Wind Top AE2220
Dan Carpenter (1):
sound: sequencer: clean up remove bogus check
Daniel T Chen (1):
ALSA: hda: Use LPIB and 6stack-dig for eMachines T5212
Takashi Iwai (3):
ALSA: hda - Add an error message for invalid mapping NID
ALSA: hda - Fix secondary ADC of ALC260 basic model
ALSA: hda - Disable MSI for Nvidia controller
Vitaliy Kulikov (1):
ALSA: hda - New Intel HDA controller
---
sound/oss/sequencer.c | 2 --
sound/pci/hda/hda_codec.c | 4 +++-
sound/pci/hda/hda_intel.c | 9 +++++++++
sound/pci/hda/patch_realtek.c | 6 ++++--
4 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c
index c798746..e85789e 100644
--- a/sound/oss/sequencer.c
+++ b/sound/oss/sequencer.c
@@ -1631,8 +1631,6 @@ unsigned long compute_finetune(unsigned long base_freq, int bend, int range,
}
semitones = bend / 100;
- if (semitones > 99)
- semitones = 99;
cents = bend % 100;
amount = (int) (semitone_tuning[semitones] * multiplier * cent_tuning[cents]) / 10000;
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 5bd7cf4..0e76ac2 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1806,6 +1806,8 @@ int snd_hda_add_nid(struct hda_codec *codec, struct snd_kcontrol *kctl,
item->nid = nid;
return 0;
}
+ printk(KERN_ERR "hda-codec: no NID for mapping control %s:%d:%d\n",
+ kctl->id.name, kctl->id.index, index);
return -EINVAL;
}
EXPORT_SYMBOL_HDA(snd_hda_add_nid);
@@ -2884,7 +2886,7 @@ int /*__devinit*/ snd_hda_build_controls(struct hda_bus *bus)
list_for_each_entry(codec, &bus->codec_list, list) {
int err = snd_hda_codec_build_controls(codec);
if (err < 0) {
- printk(KERN_ERR "hda_codec: cannot build controls"
+ printk(KERN_ERR "hda_codec: cannot build controls "
"for #%d (error %d)\n", codec->addr, err);
err = snd_hda_codec_reset(codec);
if (err < 0) {
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index da1ac90..8b29156 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2271,6 +2271,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x8086, 0xd601, "eMachines T5212", POS_FIX_LPIB),
{}
};
@@ -2378,6 +2379,13 @@ static void __devinit check_msi(struct azx *chip)
"hda_intel: msi for device %04x:%04x set to %d\n",
q->subvendor, q->subdevice, q->value);
chip->msi = q->value;
+ return;
+ }
+
+ /* NVidia chipsets seem to cause troubles with MSI */
+ if (chip->driver_type == AZX_DRIVER_NVIDIA) {
+ printk(KERN_INFO "hda_intel: Disable MSI for Nvidia chipset\n");
+ chip->msi = 0;
}
}
@@ -2706,6 +2714,7 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
{ PCI_DEVICE(0x8086, 0x3a6e), .driver_data = AZX_DRIVER_ICH },
/* PCH */
{ PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_ICH },
+ { PCI_DEVICE(0x8086, 0x3b57), .driver_data = AZX_DRIVER_ICH },
/* CPT */
{ PCI_DEVICE(0x8086, 0x1c20), .driver_data = AZX_DRIVER_PCH },
/* SCH */
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 3a83719..4ec5763 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6477,7 +6477,7 @@ static struct alc_config_preset alc260_presets[] = {
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
- .adc_nids = alc260_adc_nids,
+ .adc_nids = alc260_dual_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
.input_mux = &alc260_capture_source,
@@ -9195,6 +9195,7 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
SND_PCI_QUIRK(0x1462, 0x4314, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x4319, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x4324, "MSI", ALC883_TARGA_DIG),
+ SND_PCI_QUIRK(0x1462, 0x4570, "MSI Wind Top AE2220", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x6510, "MSI GX620", ALC883_TARGA_8ch_DIG),
SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x7187, "MSI", ALC883_6ST_DIG),
@@ -9204,6 +9205,7 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
SND_PCI_QUIRK(0x1462, 0x7280, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x7327, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x7350, "MSI", ALC883_6ST_DIG),
+ SND_PCI_QUIRK(0x1462, 0x7437, "MSI NetOn AP1900", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0xa422, "MSI", ALC883_TARGA_2ch_DIG),
SND_PCI_QUIRK(0x1462, 0xaa08, "MSI", ALC883_TARGA_2ch_DIG),
@@ -9235,7 +9237,7 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC889_INTEL),
SND_PCI_QUIRK(0x8086, 0x0021, "Intel IbexPeak", ALC889A_INTEL),
SND_PCI_QUIRK(0x8086, 0x3b56, "Intel IbexPeak", ALC889A_INTEL),
- SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
+ SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC882_6ST_DIG),
{}
};
next reply other threads:[~2010-03-17 8:07 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-17 8:07 Takashi Iwai [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-02-03 13:40 Takashi Iwai
2012-01-27 14:01 Takashi Iwai
2011-12-16 17:30 Takashi Iwai
2011-12-09 11:33 Takashi Iwai
2011-12-02 9:55 Takashi Iwai
2011-05-12 19:34 Takashi Iwai
2011-05-09 11:54 Takashi Iwai
2011-05-02 16:00 Takashi Iwai
2011-03-27 9:13 Takashi Iwai
2011-03-23 13:49 Takashi Iwai
2011-02-27 9:10 Takashi Iwai
2011-02-20 9:17 Takashi Iwai
2011-02-13 9:12 Takashi Iwai
2011-02-06 12:05 Takashi Iwai
2011-01-28 9:15 Takashi Iwai
2011-01-21 7:40 Takashi Iwai
2010-10-11 16:21 Takashi Iwai
2010-10-04 18:09 Takashi Iwai
2010-09-25 16:11 Takashi Iwai
2010-09-17 17:39 Takashi Iwai
2010-09-10 13:27 Takashi Iwai
2010-09-03 20:54 Takashi Iwai
2010-08-28 19:48 Takashi Iwai
2010-05-13 8:16 Takashi Iwai
2010-05-10 15:23 Takashi Iwai
2010-05-05 8:12 Takashi Iwai
2010-04-23 15:24 Takashi Iwai
2010-04-16 9:14 Takashi Iwai
2010-04-07 8:11 Takashi Iwai
2010-03-29 9:02 Takashi Iwai
2010-03-24 7:07 Takashi Iwai
2010-03-11 21:41 Takashi Iwai
2010-02-15 17:40 Takashi Iwai
2010-02-12 15:33 Takashi Iwai
2010-02-12 16:51 ` Linus Torvalds
2010-02-12 17:03 ` Takashi Iwai
2010-02-12 17:37 ` Takashi Iwai
2010-02-05 19:05 Takashi Iwai
2010-01-31 13:45 Takashi Iwai
2010-01-25 19:41 Takashi Iwai
2010-01-18 17:08 Takashi Iwai
2010-01-12 17:05 Takashi Iwai
2009-12-27 13:03 Takashi Iwai
2009-12-23 17:54 Takashi Iwai
2009-12-21 16:09 Takashi Iwai
2009-12-15 13:55 Takashi Iwai
2009-08-25 7:13 Takashi Iwai
2009-08-12 6:10 Takashi Iwai
2009-08-12 15:23 ` Linus Torvalds
2009-08-12 15:24 ` Takashi Iwai
2009-07-31 8:25 Takashi Iwai
2009-07-21 17:08 Takashi Iwai
2009-05-26 17:41 Takashi Iwai
2009-05-22 17:34 Takashi Iwai
2009-05-22 20:47 ` Linus Torvalds
2009-05-22 21:25 ` Takashi Iwai
2009-05-15 13:44 Takashi Iwai
2009-05-10 10:15 Takashi Iwai
2009-05-04 15:34 Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hhbofgyml.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®