mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Joe Perches <joe@perches.com>
Cc: Jaroslav Kysela <perex@perex.cz>,
	Alan Stern <stern@rowland.harvard.edu>,
	alsa-devel@alsa-project.org,
	Kernel development list <linux-kernel@vger.kernel.org>
Subject: Re: [alsa-devel] Improving or replacing snd_printk()
Date: Fri, 31 May 2013 09:23:57 +0200	[thread overview]
Message-ID: <s5hip1zipde.wl%tiwai@suse.de> (raw)
In-Reply-To: <1369983967.10556.48.camel@joe-AO722>

At Fri, 31 May 2013 00:06:07 -0700,
Joe Perches wrote:
> 
> On Fri, 2013-05-31 at 08:37 +0200, Takashi Iwai wrote:
> > It's a problem only with snd_printk(), as CONFIG_SND_VERBOSE_PRINTK
> > influences on the behavior of snd_printk() and not on the debug prints
> > with snd_printd() & co.
> 
> Are you're perhaps confused about how CONFIG_SND_VERBOSE_PRINTK
> works with or varies between snd_printd and snd_printk?
> 
> #if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
> __printf(4, 5)
> void __snd_printk(unsigned int level, const char *file, int line,
> 		  const char *format, ...);
> 
> ...
> 
> #define snd_printk(fmt, args...) \
> 	__snd_printk(0, __FILE__, __LINE__, fmt, ##args)
> 
> #ifdef CONFIG_SND_DEBUG
> [...]
> #define snd_printd(fmt, args...) \
> 	__snd_printk(1, __FILE__, __LINE__, fmt, ##args)
> 
> I don't see a difference.

Erm, indeed.  I thought we enabled the verobse prinkt always for debug
prints.  But it's not.  It's more reason for dropping
CONFIG_SND_VERBOSE_PRINTK :)

> > Hence, the goal we should achieve is rather to drop
> > CONFIG_SND_VERBOSE_PRINTK.  *This* is the useless thing.
> 
> Maybe.
> 
> > Meanwhile, many snd_printk() messages might start looking annoying
> > with the extra information.  If so, such lines should be replaced with
> > the standard prints like dev_*().  I think almost all snd_printk()
> > like below are better replaced with standard ones.
> 
> below?  Was there something that was supposed to be below?
> Are you referring to the KERN_ERR/urb example above?

Sorry, scratch it.  Just a typo during changing the lines.

> > So, alternatively, we can begin with replacing some snd_printk() with
> > the standard functions, then dropping CONFIG_SND_VERBOSE_PRINTK.
> 
> Dropping CONFIG_SND_VERBOSE_PRINTK would simplify code a bit.
> 
> > I think most of snd_printd() and snd_printdd() can be kept as is.
> > These are just debug messages, after all.
> 
> Some of those are emitted at levels other than KERN_DEBUG.
> I think that odd.

Yeah, they aren't good, but it's a different topic.


Takashi

  reply	other threads:[~2013-05-31  7:23 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-29 19:27 Alan Stern
2013-05-29 19:51 ` Joe Perches
2013-05-30 18:14   ` Alan Stern
2013-05-30 18:49     ` [alsa-devel] " Jaroslav Kysela
2013-05-30 19:43       ` Alan Stern
2013-05-30 20:30         ` Joe Perches
2013-05-31  6:37       ` Takashi Iwai
2013-05-31  7:06         ` Joe Perches
2013-05-31  7:23           ` Takashi Iwai [this message]
2013-05-31  7:30             ` Joe Perches
2013-05-31  7:35               ` Takashi Iwai
2013-05-31  7:38                 ` Joe Perches
2013-05-31  7:58                   ` Takashi Iwai
2013-05-31 14:24                     ` Alan Stern
2013-05-31 14:34                       ` Takashi Iwai
2013-05-31 15:33                         ` Alan Stern
2013-05-31 15:38                           ` Takashi Iwai
2013-05-31 17:06                         ` Joe Perches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hip1zipde.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®