From: Takashi Iwai <tiwai@suse.de>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: tiwai@suse.com, "Jaroslav Kysela" <perex@perex.cz>,
"Joe Perches" <joe@perches.com>,
"Mark Brown" <broonie@kernel.org>,
"Chris Chiu" <chiu@endlessm.com>, "Tom Yan" <tom.ty89@gmail.com>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Thomas Ebeling" <penguins@bollie.de>,
"František Kučera" <franta-linux@frantovo.cz>,
"Xiyu Yang" <xiyuyang19@fudan.edu.cn>,
"Olivia Mackintosh" <livvy@base.nu>,
alsa-devel@alsa-project.org (moderated list:SOUND),
linux-kernel@vger.kernel.org (open list)
Subject: Re: [PATCH v3 2/2] ALSA: usb-audio: Check connector value on resume
Date: Fri, 26 Mar 2021 09:11:20 +0100 [thread overview]
Message-ID: <s5hk0pul4gn.wl-tiwai@suse.de> (raw)
In-Reply-To: <20210325165918.22593-2-kai.heng.feng@canonical.com>
On Thu, 25 Mar 2021 17:59:13 +0100,
Kai-Heng Feng wrote:
>
> Rear Mic on Lenovo P620 cannot record after S3, despite that there's no
> error and the other two functions of the USB audio, Line In and Line
> Out, work just fine.
>
> The mic starts to work again after running userspace app like "alsactl
> store". Following the lead, the evidence shows that as soon as connector
> status is queried, the mic can work again.
>
> So also check connector value on resume to "wake up" the USB audio to
> make it functional.
>
> This can be device specific, however I think this generic approach may
> benefit more than one device.
>
> Now the resume callback checks connector, and a new callback,
> reset_resume, to also restore switches and volumes.
>
> Suggested-by: Takashi Iwai <tiwai@suse.de>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Applied now. Thanks.
Takashi
> ---
> v3:
> - New callback to handle resume and reset-resume separately.
>
> v2:
> - Remove reset-resume.
> - Fold the connector checking to the mixer resume callback.
>
> sound/usb/mixer.c | 44 +++++++++++++++++++++++++++++++---------
> sound/usb/mixer.h | 1 +
> sound/usb/mixer_quirks.c | 2 +-
> 3 files changed, 36 insertions(+), 11 deletions(-)
>
> diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
> index 5a2d9a768f70..2faf5767c7f8 100644
> --- a/sound/usb/mixer.c
> +++ b/sound/usb/mixer.c
> @@ -3631,20 +3631,43 @@ static int restore_mixer_value(struct usb_mixer_elem_list *list)
> return 0;
> }
>
> +static int default_mixer_resume(struct usb_mixer_elem_list *list)
> +{
> + struct usb_mixer_elem_info *cval = mixer_elem_list_to_info(list);
> +
> + /* get connector value to "wake up" the USB audio */
> + if (cval->val_type == USB_MIXER_BOOLEAN && cval->channels == 1)
> + get_connector_value(cval, NULL, NULL);
> +
> + return 0;
> +}
> +
> +static int default_mixer_reset_resume(struct usb_mixer_elem_list *list)
> +{
> + int err = default_mixer_resume(list);
> +
> + if (err < 0)
> + return err;
> + return restore_mixer_value(list);
> +}
> +
> int snd_usb_mixer_resume(struct usb_mixer_interface *mixer, bool reset_resume)
> {
> struct usb_mixer_elem_list *list;
> + usb_mixer_elem_resume_func_t f;
> int id, err;
>
> - if (reset_resume) {
> - /* restore cached mixer values */
> - for (id = 0; id < MAX_ID_ELEMS; id++) {
> - for_each_mixer_elem(list, mixer, id) {
> - if (list->resume) {
> - err = list->resume(list);
> - if (err < 0)
> - return err;
> - }
> + /* restore cached mixer values */
> + for (id = 0; id < MAX_ID_ELEMS; id++) {
> + for_each_mixer_elem(list, mixer, id) {
> + if (reset_resume)
> + f = list->reset_resume;
> + else
> + f = list->resume;
> + if (f) {
> + err = f(list);
> + if (err < 0)
> + return err;
> }
> }
> }
> @@ -3663,6 +3686,7 @@ void snd_usb_mixer_elem_init_std(struct usb_mixer_elem_list *list,
> list->id = unitid;
> list->dump = snd_usb_mixer_dump_cval;
> #ifdef CONFIG_PM
> - list->resume = restore_mixer_value;
> + list->resume = default_mixer_resume;
> + list->reset_resume = default_mixer_reset_resume;
> #endif
> }
> diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
> index c29e27ac43a7..e5a01f17bf3c 100644
> --- a/sound/usb/mixer.h
> +++ b/sound/usb/mixer.h
> @@ -69,6 +69,7 @@ struct usb_mixer_elem_list {
> bool is_std_info;
> usb_mixer_elem_dump_func_t dump;
> usb_mixer_elem_resume_func_t resume;
> + usb_mixer_elem_resume_func_t reset_resume;
> };
>
> /* iterate over mixer element list of the given unit id */
> diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
> index ffd922327ae4..b7f9c2fded05 100644
> --- a/sound/usb/mixer_quirks.c
> +++ b/sound/usb/mixer_quirks.c
> @@ -151,7 +151,7 @@ static int add_single_ctl_with_resume(struct usb_mixer_interface *mixer,
> *listp = list;
> list->mixer = mixer;
> list->id = id;
> - list->resume = resume;
> + list->reset_resume = resume;
> kctl = snd_ctl_new1(knew, list);
> if (!kctl) {
> kfree(list);
> --
> 2.30.2
>
next prev parent reply other threads:[~2021-03-26 8:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-25 16:59 [PATCH v3 1/2] ALSA: usb-audio: Carve out connector value checking into a helper Kai-Heng Feng
2021-03-25 16:59 ` [PATCH v3 2/2] ALSA: usb-audio: Check connector value on resume Kai-Heng Feng
2021-03-26 8:11 ` Takashi Iwai [this message]
2021-03-26 8:11 ` [PATCH v3 1/2] ALSA: usb-audio: Carve out connector value checking into a helper Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hk0pul4gn.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=chiu@endlessm.com \
--cc=franta-linux@frantovo.cz \
--cc=joe@perches.com \
--cc=kai.heng.feng@canonical.com \
--cc=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=livvy@base.nu \
--cc=penguins@bollie.de \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=tom.ty89@gmail.com \
--cc=xiyuyang19@fudan.edu.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®