Re: [PATCH] media: go7007: Fix URB type for interrupt handling

[Takashi Iwai <tiwai@suse.de>]

On Fri, 07 Feb 2020 09:49:09 +0100,
Mauro Carvalho Chehab wrote:
> 
> Em Thu,  6 Feb 2020 16:45:27 +0100
> Takashi Iwai <tiwai@suse.de> escreveu:
> 
> > Josef reported that his old-and-good Plextor ConvertX M402U video
> > converter spews lots of WARNINGs on the recent kernels, and it turned
> > out that the device uses a bulk endpoint for interrupt handling just
> > like 2250 board.
> > 
> > For fixing it, generalize the check with the proper verification of
> > the endpoint instead of hard-coded board type check.
> > 
> > Fixes: 7e5219d18e93 ("[media] go7007: Fix 2250 urb type")
> > Reported-and-tested-by: Josef Möllers <josef.moellers@suse.com>
> > BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1162583
> > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206427
> > Signed-off-by: Takashi Iwai <tiwai@suse.de>
> > 
> > ---
> >  drivers/media/usb/go7007/go7007-usb.c | 4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/media/usb/go7007/go7007-usb.c b/drivers/media/usb/go7007/go7007-usb.c
> > index ff2aa057c1fb..f889c9d740cd 100644
> > --- a/drivers/media/usb/go7007/go7007-usb.c
> > +++ b/drivers/media/usb/go7007/go7007-usb.c
> > @@ -1044,6 +1044,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
> >  	struct go7007_usb *usb;
> >  	const struct go7007_usb_board *board;
> >  	struct usb_device *usbdev = interface_to_usbdev(intf);
> > +	struct usb_host_endpoint *ep;
> >  	unsigned num_i2c_devs;
> >  	char *name;
> >  	int video_pipe, i, v_urb_len;
> > @@ -1140,7 +1141,8 @@ static int go7007_usb_probe(struct usb_interface *intf,
> >  	if (usb->intr_urb->transfer_buffer == NULL)
> >  		goto allocfail;
> >  
> > -	if (go->board_id == GO7007_BOARDID_SENSORAY_2250)
> > +	ep = usb->usbdev->ep_in[4];
> 
> Hmm... why [4] above?
> 
> I mean, what other drivers do is something like:
> 
> 	for (i = 0; i < intf->num_altsetting; i++) {
> 	   for (j = 0; j < intf->altsetting[i].desc.bNumEndpoints; j++) {
> 		ep = &intf->altsetting[i].endpoint[j].desc;
> 		/* some logic to check ep and change alt if needed */
> 	   }
>         }
> 

It corresponds to the endpoint for the created URB will be associated
with; i.e.

> > +	if (usb_endpoint_type(&ep->desc) == USB_ENDPOINT_XFER_BULK)
> >  		usb_fill_bulk_urb(usb->intr_urb, usb->usbdev,
> >  			usb_rcvbulkpipe(usb->usbdev, 4),

here it's usb_rcvbulkpipe(dev, 4) or usb_rcvintpipe(dev, 4) indicating
the endpoint 4.

If it matters, it can be changed to
  usb_pipe_endpoint(usb->usbdev, usb_rcvbulkpipe(usb->usbdev, 4))
too.


thanks,

Takashi