From: Takashi Iwai <tiwai@suse.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>, linux-kernel@vger.kernel.org
Subject: [GIT PULL] ALSA fixes
Date: Wed, 12 Nov 2008 16:56:32 +0100 [thread overview]
Message-ID: <s5hljvphr9r.wl%tiwai@suse.de> (raw)
Linus,
please pull ALSA updates for 2.6.28-rc5 from:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-linus
This contains fixes for bugs with STAC/IDT HD-audio codecs, typically
hitting Dell laptops.
Thanks!
Takashi
===
Takashi Iwai (3):
ALSA: hda - Add missing analog-mux mixer creation for STAC9200
ALSA: hda - Fix input pin initialization for STAC/IDT codecs
ALSA: hda - Fix IDT/STAC multiple HP detection
---
sound/pci/hda/patch_sigmatel.c | 85 +++++++++++++++++++++++++++++----------
1 files changed, 63 insertions(+), 22 deletions(-)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index e608591..4300a67 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -212,7 +212,7 @@ struct sigmatel_spec {
/* i/o switches */
unsigned int io_switch[2];
unsigned int clfe_swap;
- unsigned int hp_switch;
+ unsigned int hp_switch; /* NID of HP as line-out */
unsigned int aloopback;
struct hda_pcm pcm_rec[2]; /* PCM information */
@@ -2443,7 +2443,7 @@ static int stac92xx_hp_switch_get(struct snd_kcontrol *kcontrol,
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct sigmatel_spec *spec = codec->spec;
- ucontrol->value.integer.value[0] = spec->hp_switch;
+ ucontrol->value.integer.value[0] = !!spec->hp_switch;
return 0;
}
@@ -2452,8 +2452,9 @@ static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol,
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct sigmatel_spec *spec = codec->spec;
-
- spec->hp_switch = ucontrol->value.integer.value[0];
+ int nid = kcontrol->private_value;
+
+ spec->hp_switch = ucontrol->value.integer.value[0] ? nid : 0;
/* check to be sure that the ports are upto date with
* switch changes
@@ -2862,7 +2863,8 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
if (cfg->hp_outs > 1) {
err = stac92xx_add_control(spec,
STAC_CTL_WIDGET_HP_SWITCH,
- "Headphone as Line Out Switch", 0);
+ "Headphone as Line Out Switch",
+ cfg->hp_pins[cfg->hp_outs - 1]);
if (err < 0)
return err;
}
@@ -3530,6 +3532,12 @@ static int stac9200_parse_auto_config(struct hda_codec *codec)
if ((err = stac9200_auto_create_lfe_ctls(codec, &spec->autocfg)) < 0)
return err;
+ if (spec->num_muxes > 0) {
+ err = stac92xx_auto_create_mux_input_ctls(codec);
+ if (err < 0)
+ return err;
+ }
+
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = 0x05;
if (spec->autocfg.dig_in_pin)
@@ -3647,14 +3655,18 @@ static int stac92xx_init(struct hda_codec *codec)
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = cfg->input_pins[i];
if (nid) {
- unsigned int pinctl = snd_hda_codec_read(codec, nid,
- 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
- /* if PINCTL already set then skip */
- if (pinctl & AC_PINCAP_IN)
- continue;
- pinctl = AC_PINCTL_IN_EN;
- if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC)
- pinctl |= stac92xx_get_vref(codec, nid);
+ unsigned int pinctl;
+ if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) {
+ /* for mic pins, force to initialize */
+ pinctl = stac92xx_get_vref(codec, nid);
+ } else {
+ pinctl = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ /* if PINCTL already set then skip */
+ if (pinctl & AC_PINCTL_IN_EN)
+ continue;
+ }
+ pinctl |= AC_PINCTL_IN_EN;
stac92xx_auto_set_pinctl(codec, nid, pinctl);
}
}
@@ -3776,11 +3788,30 @@ static int get_hp_pin_presence(struct hda_codec *codec, hda_nid_t nid)
return 0;
}
+/* return non-zero if the hp-pin of the given array index isn't
+ * a jack-detection target
+ */
+static int no_hp_sensing(struct sigmatel_spec *spec, int i)
+{
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+
+ /* ignore sensing of shared line and mic jacks */
+ if (spec->line_switch &&
+ cfg->hp_pins[i] == cfg->input_pins[AUTO_PIN_LINE])
+ return 1;
+ if (spec->mic_switch &&
+ cfg->hp_pins[i] == cfg->input_pins[AUTO_PIN_MIC])
+ return 1;
+ /* ignore if the pin is set as line-out */
+ if (cfg->hp_pins[i] == spec->hp_switch)
+ return 1;
+ return 0;
+}
+
static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res)
{
struct sigmatel_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
- int nid = cfg->hp_pins[cfg->hp_outs - 1];
int i, presence;
presence = 0;
@@ -3791,15 +3822,16 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res)
for (i = 0; i < cfg->hp_outs; i++) {
if (presence)
break;
- if (spec->hp_switch && cfg->hp_pins[i] == nid)
- break;
+ if (no_hp_sensing(spec, i))
+ continue;
presence = get_hp_pin_presence(codec, cfg->hp_pins[i]);
}
if (presence) {
- /* disable lineouts, enable hp */
+ /* disable lineouts */
if (spec->hp_switch)
- stac92xx_reset_pinctl(codec, nid, AC_PINCTL_OUT_EN);
+ stac92xx_reset_pinctl(codec, spec->hp_switch,
+ AC_PINCTL_OUT_EN);
for (i = 0; i < cfg->line_outs; i++)
stac92xx_reset_pinctl(codec, cfg->line_out_pins[i],
AC_PINCTL_OUT_EN);
@@ -3811,9 +3843,10 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res)
spec->gpio_dir, spec->gpio_data &
~spec->eapd_mask);
} else {
- /* enable lineouts, disable hp */
+ /* enable lineouts */
if (spec->hp_switch)
- stac92xx_set_pinctl(codec, nid, AC_PINCTL_OUT_EN);
+ stac92xx_set_pinctl(codec, spec->hp_switch,
+ AC_PINCTL_OUT_EN);
for (i = 0; i < cfg->line_outs; i++)
stac92xx_set_pinctl(codec, cfg->line_out_pins[i],
AC_PINCTL_OUT_EN);
@@ -3825,8 +3858,16 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res)
spec->gpio_dir, spec->gpio_data |
spec->eapd_mask);
}
- if (!spec->hp_switch && cfg->hp_outs > 1 && presence)
- stac92xx_set_pinctl(codec, nid, AC_PINCTL_OUT_EN);
+ /* toggle hp outs */
+ for (i = 0; i < cfg->hp_outs; i++) {
+ unsigned int val = AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN;
+ if (no_hp_sensing(spec, i))
+ continue;
+ if (presence)
+ stac92xx_set_pinctl(codec, cfg->hp_pins[i], val);
+ else
+ stac92xx_reset_pinctl(codec, cfg->hp_pins[i], val);
+ }
}
static void stac92xx_pin_sense(struct hda_codec *codec, int idx)
next reply other threads:[~2008-11-12 15:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-12 15:56 Takashi Iwai [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-11-21 16:51 Takashi Iwai
2008-11-18 15:16 Takashi Iwai
2008-11-10 17:03 Takashi Iwai
2008-11-03 15:42 Takashi Iwai
2008-10-29 18:17 Takashi Iwai
2008-10-27 16:21 Takashi Iwai
2008-10-23 17:56 Takashi Iwai
2008-09-30 16:01 Takashi Iwai
2008-09-26 16:13 Takashi Iwai
2008-09-22 15:57 [GIT PULL] ALSA fix Takashi Iwai
2008-09-23 16:59 ` [GIT PULL] ALSA fixes Takashi Iwai
2008-06-23 15:08 Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hljvphr9r.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®