From: Takashi Iwai <tiwai@suse.de>
To: Andreas Mohr <andi@lisas.de>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>,
linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
Kernel Testers List <kernel-testers@vger.kernel.org>
Subject: Re: [alsa-devel] Bugs on aspire one A150
Date: Fri, 20 Mar 2009 21:33:19 +0100 [thread overview]
Message-ID: <s5hmybgnddc.wl%tiwai@suse.de> (raw)
In-Reply-To: <20090320185640.GA17278@rhlx01.hs-esslingen.de>
At Fri, 20 Mar 2009 19:56:40 +0100,
Andreas Mohr wrote:
>
> Hi,
>
> On Wed, Mar 18, 2009 at 10:19:53AM +0100, Takashi Iwai wrote:
> > At Wed, 18 Mar 2009 10:05:07 +0100,
> > Andreas Mohr wrote:
> > >
> > > Hi,
> > >
> > > On Tue, Mar 17, 2009 at 09:32:16PM +0100, Takashi Iwai wrote:
> > > > Don't use -Dplughw:0. Then the default setup will be used.
> > > >
> > > > % arecord -fdat -c1 test.wav
> > >
> > > Tried that, didn't help. /usr/share/alsa/cards/HDA-Intel.conf still
> > > contains the patch, but equal Capture Volume sliders still silenced
> > > audio input, whereas non-equal worked. Hmm.
> >
> > What is the output with -v option?
>
> Sorry for the delay!
>
> $ arecord -fdat -c1 -v test.wav; aplay test.wav
> Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
> ALSA <-> PulseAudio PCM I/O Plugin
> Its setup is:
> stream : CAPTURE
> access : RW_INTERLEAVED
> format : S16_LE
> subformat : STD
> channels : 1
> rate : 48000
> exact rate : 48000 (48000/1)
> msbits : 16
> buffer_size : 24000
> period_size : 6000
> period_time : 125000
> tstamp_mode : NONE
> period_step : 1
> avail_min : 6000
> period_event : 0
> start_threshold : 1
> stop_threshold : 24000
> silence_threshold: 0
> silence_size : 0
> boundary : 1572864000
> ^CAborted by signal Interrupt...
> Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
> andi@andinet:/tmp$
>
>
> Hmm. Note the pulseaudio stuff above...
Yes, that's the very reason. If you don't PA and avoid the
default configuration override (e.g. defined in /etc/asound.conf)
my patch should work.
Takashi
next prev parent reply other threads:[~2009-03-20 20:33 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-08 3:26 Maxim Levitsky
2008-11-08 11:57 ` Alan Jenkins
2008-11-09 0:52 ` Maxim Levitsky
2008-11-09 8:54 ` [alsa-devel] " Takashi Iwai
2008-11-09 13:31 ` Andreas Mohr
2008-11-09 15:13 ` Andreas Mohr
2008-11-09 18:58 ` Takashi Iwai
2008-11-09 20:09 ` Andreas Mohr
2008-11-12 11:08 ` Takashi Iwai
2008-11-12 17:07 ` Maxim Levitsky
2008-11-12 18:05 ` Andreas Mohr
2008-11-14 18:05 ` Maxim Levitsky
2008-11-22 19:00 ` Maxim Levitsky
2008-11-22 19:43 ` Andreas Mohr
2008-11-24 14:35 ` Takashi Iwai
2009-03-15 9:21 ` Andreas Mohr
2009-03-16 12:03 ` Andreas Mohr
2009-03-16 12:09 ` Takashi Iwai
2009-03-16 13:30 ` Andreas Mohr
2009-03-16 14:18 ` Takashi Iwai
2009-03-16 14:31 ` Andreas Mohr
2009-03-16 14:42 ` Takashi Iwai
2009-03-16 14:50 ` Andreas Mohr
2009-03-16 15:34 ` Takashi Iwai
2009-03-16 16:02 ` Andreas Mohr
2009-03-16 16:06 ` Takashi Iwai
2009-03-16 16:19 ` Takashi Iwai
2009-03-16 17:00 ` Andreas Mohr
2009-03-16 17:15 ` Takashi Iwai
2009-03-16 17:30 ` Andreas Mohr
2009-03-16 17:34 ` Takashi Iwai
2009-03-16 18:06 ` Andreas Mohr
2009-03-16 20:28 ` Takashi Iwai
2009-03-16 21:22 ` Andreas Mohr
2009-03-17 0:52 ` Maxim Levitsky
2009-03-17 7:57 ` Takashi Iwai
2009-03-17 11:30 ` Maxim Levitsky
2009-03-17 12:52 ` Takashi Iwai
2009-03-17 7:57 ` Takashi Iwai
2009-03-17 10:05 ` Andreas Mohr
2009-03-17 10:38 ` Andreas Mohr
2009-03-17 10:47 ` Andreas Mohr
2009-03-17 11:25 ` Takashi Iwai
2009-03-17 16:18 ` Andreas Mohr
2009-03-17 20:32 ` Takashi Iwai
2009-03-18 9:05 ` Andreas Mohr
2009-03-18 9:19 ` Takashi Iwai
2009-03-20 18:56 ` Andreas Mohr
2009-03-20 20:33 ` Takashi Iwai [this message]
2009-03-22 12:55 ` Andreas Mohr
2009-03-23 6:51 ` Takashi Iwai
2008-11-12 17:20 ` Maxim Levitsky
2008-11-12 18:53 ` HDA-emu 0.0.1 (Re: [alsa-devel] Bugs on aspire one A150) Takashi Iwai
2008-11-09 10:43 ` Bugs on aspire one A150 Alan Jenkins
2008-11-12 17:48 ` Maxim Levitsky
2008-11-14 19:06 ` Maxim Levitsky
2008-11-14 19:59 ` Alan Jenkins
2008-11-15 12:52 ` Maxim Levitsky
2008-11-15 12:55 ` Matthew Garrett
2008-11-10 16:51 ` Bob Copeland
2008-11-10 21:33 ` Maxim Levitsky
2008-11-10 22:12 ` [ath5k-devel] " Nick Kossifidis
2008-11-12 17:51 ` Maxim Levitsky
2008-11-13 14:58 ` Bob Copeland
2008-11-14 3:47 ` Bob Copeland
2008-11-14 18:57 ` Maxim Levitsky
2008-11-17 17:28 ` Bob Copeland
2008-11-17 18:55 ` Maxim Levitsky
2008-12-01 15:33 ` Maxim Levitsky
2008-12-13 13:28 ` Maxim Levitsky
2008-12-13 14:08 ` Nick Kossifidis
2008-12-13 14:36 ` Maxim Levitsky
2008-12-13 14:38 ` Maxim Levitsky
2008-12-13 14:24 ` Bob Copeland
2008-12-13 14:31 ` Maxim Levitsky
2008-12-30 4:26 ` Bob Copeland
2008-12-30 12:43 ` Maxim Levitsky
2008-12-31 9:18 ` Andreas Mohr
2008-12-31 13:59 ` Andreas Mohr
2008-12-31 14:06 ` Bob Copeland
2008-12-31 14:03 ` Bob Copeland
2008-12-31 16:51 ` Maxim Levitsky
2009-01-01 13:41 ` Andreas Mohr
2009-01-01 14:15 ` Maxim Levitsky
2009-01-01 20:27 ` Andreas Mohr
2009-01-01 15:09 ` Bob Copeland
2008-12-13 13:15 ` Maxim Levitsky
2008-12-13 13:35 ` Rafael J. Wysocki
2008-12-13 14:21 ` Maxim Levitsky
2008-12-13 17:42 ` Rafael J. Wysocki
2008-12-13 18:04 ` Maxim Levitsky
2008-12-14 22:29 ` J.A. Magallón
2008-12-14 22:57 ` J.A. Magallón
2008-12-14 23:18 ` Maxim Levitsky
2008-12-14 23:24 ` J.A. Magallón
2008-12-14 23:35 ` J.A. Magallón
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hmybgnddc.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=andi@lisas.de \
--cc=kernel-testers@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maximlevitsky@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®