From: Takashi Iwai <tiwai@suse.de>
To: Santiago Garcia Mantinan <manty@manty.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [ALSA] 2.6.21 loading of module snd_ymfpci takes 2 minutes
Date: Thu, 26 Apr 2007 14:11:35 +0200 [thread overview]
Message-ID: <s5hmz0vpc7c.wl%tiwai@suse.de> (raw)
In-Reply-To: <20070426101248.GA15419@clandestino.aytolacoruna.es>
At Thu, 26 Apr 2007 12:12:48 +0200,
Santiago Garcia Mantinan wrote:
>
> I have just upgraded from 2.6.20 to 2.6.21, when I rebooted I thought the
> computer had halted after loading snd_ymfpci, but what happens is that it
> takes 2 minutes (120 seconds mesured with time) for the driver to load, but
> then works as expected.
>
> After making a diff between the 2.6.20 and 2.6.21 versions of the ymfpci
> driver I decided to replace the ymfpci_main.c from 2.6.21 with the one from
> 2.6.20, it compiled with a few warnings and then worked ok, like it used to
> work, without the two minutes delay.
It's because the recent ymfpci driver tries to request_firmware() at
first. And since no files are found, it just waits for certain time.
A workaround is to install the firmware files from alsa-firmware
1.0.14rc* package.
I'll fix the codes on 2.6.22 not to make external firmwares
mandatory via Kconfig option.
Takashi
> These are the messages I get from the kernel when I load the driver:
> PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
> ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
>
> This is the info I got for the sound card, which is integrated on the
> motherboard:
>
> Card: Yamaha DS-1L (YMF740C)
> Chip: Asahi Kasei AK4543
>
> lspci:
> 00:0a.0 0401: 1073:000c (rev 03)
> Subsystem: 1033:804b
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
> Latency: 64 (1250ns min, 6250ns max)
> Interrupt: pin A routed to IRQ 9
> Region 0: Memory at e8108000 (32-bit, non-prefetchable) [size=32K]
> Capabilities: <access denied>
>
> /proc/asound/cards:
> 0 [YMF740C ]: YMF740C - Yamaha DS-1L (YMF740C)
> Yamaha DS-1L (YMF740C) at 0xe8108000, irq 9
>
> Hope that helps to diagnose the problem, if you need any other info don't
> hesitate to contact me.
>
> Regards...
> --
> Santiago García Mantiñán
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
prev parent reply other threads:[~2007-04-26 12:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-26 10:12 Santiago Garcia Mantinan
2007-04-26 12:11 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hmz0vpc7c.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=manty@manty.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®