Re: ALSA HDA Intel stoped to work in 2.6.16-*

[Takashi Iwai <tiwai@suse.de>]

At Tue, 28 Feb 2006 05:51:26 -0300,
Otavio Salvador wrote:
> 
> > This kind of problem is likely due to a broken BIOS.  The current code
> > parses the default pin configuration set up via BIOS while the older
> > version used  the fixed pin assignment (depending on the codec chip,
> > though).
> > In most cases, it can be recovered by specifying a proper model module
> > option.  See ALSA-Configuration.txt for details.
> 
> I wasn't able to do it.

Didn't it worked?  Which module parameter did you use?

> My lspci output for it is the following:
> 
> 0000:00:1b.0 0403: 8086:2668 (rev 04)
> 0000:00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
> 
> 0000:00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
>         Subsystem: QUANTA Computer Inc: Unknown device 0729
>         Flags: fast devsel, IRQ 17
>         Memory at b0000000 (64-bit, non-prefetchable) [size=16K]
>         Capabilities: [50] Power Management version 2
>         Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>         Capabilities: [70] #10 [0091]
> 
> I hope it helps.

I need more detail of the hardware -- what model of a laptop or a
desktop from which vendor.


Takashi