mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Roel Kluin <roel.kluin@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>,
	johannes@sipsolutions.net, linuxppc-dev@ozlabs.org,
	alsa-devel@alsa-project.org, lkml <linux-kernel@vger.kernel.org>
Subject: Re: [alsa-devel] [PATCH] aoa: remove driver_data direct access of	struct device
Date: Tue, 12 May 2009 08:40:05 +0200	[thread overview]
Message-ID: <s5hws8mu8my.wl%tiwai@suse.de> (raw)
In-Reply-To: <4A08828B.7090106@gmail.com>

At Mon, 11 May 2009 21:54:51 +0200,
Roel Kluin wrote:
> 
> To avoid direct access to the driver_data pointer in struct device, the
> functions dev_get_drvdata() and dev_set_drvdata() should be used.
> 
> Signed-off-by: Roel Kluin <roel.kluin@gmail.com>

The same fix has been already in Greg's tree (and thus in linux-next).

Greg, is it OK that I take over your patch to sound git tree?


thanks,

Takashi

> ---
> diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c
> index fbf5c93..586965f 100644
> --- a/sound/aoa/fabrics/layout.c
> +++ b/sound/aoa/fabrics/layout.c
> @@ -1037,7 +1037,7 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
>  	}
>  	ldev->selfptr_headphone.ptr = ldev;
>  	ldev->selfptr_lineout.ptr = ldev;
> -	sdev->ofdev.dev.driver_data = ldev;
> +	dev_set_drvdata(&sdev->ofdev.dev, ldev);
>  	list_add(&ldev->list, &layouts_list);
>  	layouts_list_items++;
>  
> @@ -1081,7 +1081,7 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
>  
>  static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
>  {
> -	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
> +	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
>  	int i;
>  
>  	for (i=0; i<MAX_CODECS_PER_BUS; i++) {
> @@ -1114,7 +1114,7 @@ static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
>  #ifdef CONFIG_PM
>  static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t state)
>  {
> -	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
> +	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
>  
>  	if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
>  		ldev->gpio.methods->all_amps_off(&ldev->gpio);
> @@ -1124,7 +1124,7 @@ static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t sta
>  
>  static int aoa_fabric_layout_resume(struct soundbus_dev *sdev)
>  {
> -	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
> +	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
>  
>  	if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
>  		ldev->gpio.methods->all_amps_restore(&ldev->gpio);
> diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c
> index 418c84c..4e3b819 100644
> --- a/sound/aoa/soundbus/i2sbus/core.c
> +++ b/sound/aoa/soundbus/i2sbus/core.c
> @@ -358,14 +358,14 @@ static int i2sbus_probe(struct macio_dev* dev, const struct of_device_id *match)
>  		return -ENODEV;
>  	}
>  
> -	dev->ofdev.dev.driver_data = control;
> +	dev_set_drvdata(&dev->ofdev.dev, control);
>  
>  	return 0;
>  }
>  
>  static int i2sbus_remove(struct macio_dev* dev)
>  {
> -	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
> +	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
>  	struct i2sbus_dev *i2sdev, *tmp;
>  
>  	list_for_each_entry_safe(i2sdev, tmp, &control->list, item)
> @@ -377,7 +377,7 @@ static int i2sbus_remove(struct macio_dev* dev)
>  #ifdef CONFIG_PM
>  static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state)
>  {
> -	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
> +	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
>  	struct codec_info_item *cii;
>  	struct i2sbus_dev* i2sdev;
>  	int err, ret = 0;
> @@ -407,7 +407,7 @@ static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state)
>  
>  static int i2sbus_resume(struct macio_dev* dev)
>  {
> -	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
> +	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
>  	struct codec_info_item *cii;
>  	struct i2sbus_dev* i2sdev;
>  	int err, ret = 0;
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> 

  reply	other threads:[~2009-05-12  6:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-11 19:54 Roel Kluin
2009-05-12  6:40 ` Takashi Iwai [this message]
2009-05-12  6:57   ` [alsa-devel] " Greg KH
2009-05-12  7:23     ` Takashi Iwai
2009-05-12 23:05       ` Greg KH
2009-05-13  5:44         ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hws8mu8my.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=gregkh@suse.de \
    --cc=johannes@sipsolutions.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=roel.kluin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®