mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Ondrej Zary <linux@rainbow-software.org>
Cc: alsa-devel@alsa-project.org,
	Kernel development list <linux-kernel@vger.kernel.org>
Subject: Re: [alsa-devel] [PATCH] snd-opti9xx: Implement suspend/resume
Date: Tue, 17 Jul 2012 10:57:15 +0200	[thread overview]
Message-ID: <s5hy5min4t0.wl%tiwai@suse.de> (raw)
In-Reply-To: <201207170916.44277.linux@rainbow-software.org>

At Tue, 17 Jul 2012 09:16:44 +0200,
Ondrej Zary wrote:
> 
> Implement suspend/resume support for Opti 92x and 93x chips.
> Tested with Opti 929A+AD1848 and Opti 931.
> 
> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>

Applied now.  Thanks.


Takashi

> 
> --- a/sound/isa/opti9xx/opti92x-ad1848.c
> +++ b/sound/isa/opti9xx/opti92x-ad1848.c
> @@ -136,8 +136,8 @@ struct snd_opti9xx {
>  #ifdef OPTi93X
>  	unsigned long mc_indir_index;
>  	struct resource *res_mc_indir;
> -	struct snd_wss *codec;
>  #endif	/* OPTi93X */
> +	struct snd_wss *codec;
>  	unsigned long pwd_reg;
>  
>  	spinlock_t lock;
> @@ -870,9 +870,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
>  			       &codec);
>  	if (error < 0)
>  		return error;
> -#ifdef OPTi93X
>  	chip->codec = codec;
> -#endif
>  	error = snd_wss_pcm(codec, 0, &pcm);
>  	if (error < 0)
>  		return error;
> @@ -1053,11 +1051,55 @@ static int __devexit snd_opti9xx_isa_remove(struct device *devptr,
>  	return 0;
>  }
>  
> +#ifdef CONFIG_PM
> +static int snd_opti9xx_suspend(struct snd_card *card)
> +{
> +	struct snd_opti9xx *chip = card->private_data;
> +
> +	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
> +	chip->codec->suspend(chip->codec);
> +	return 0;
> +}
> +
> +static int snd_opti9xx_resume(struct snd_card *card)
> +{
> +	struct snd_opti9xx *chip = card->private_data;
> +	int error, xdma2;
> +#if defined(CS4231) || defined(OPTi93X)
> +	xdma2 = dma2;
> +#else
> +	xdma2 = -1;
> +#endif
> +
> +	error = snd_opti9xx_configure(chip, port, irq, dma1, xdma2,
> +				      mpu_port, mpu_irq);
> +	if (error)
> +		return error;
> +	chip->codec->resume(chip->codec);
> +	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
> +	return 0;
> +}
> +
> +static int snd_opti9xx_isa_suspend(struct device *dev, unsigned int n,
> +				   pm_message_t state)
> +{
> +	return snd_opti9xx_suspend(dev_get_drvdata(dev));
> +}
> +
> +static int snd_opti9xx_isa_resume(struct device *dev, unsigned int n)
> +{
> +	return snd_opti9xx_resume(dev_get_drvdata(dev));
> +}
> +#endif
> +
>  static struct isa_driver snd_opti9xx_driver = {
>  	.match		= snd_opti9xx_isa_match,
>  	.probe		= snd_opti9xx_isa_probe,
>  	.remove		= __devexit_p(snd_opti9xx_isa_remove),
> -	/* FIXME: suspend/resume */
> +#ifdef CONFIG_PM
> +	.suspend	= snd_opti9xx_isa_suspend,
> +	.resume		= snd_opti9xx_isa_resume,
> +#endif
>  	.driver		= {
>  		.name	= DEV_NAME
>  	},
> @@ -1123,12 +1165,29 @@ static void __devexit snd_opti9xx_pnp_remove(struct pnp_card_link * pcard)
>  	snd_opti9xx_pnp_is_probed = 0;
>  }
>  
> +#ifdef CONFIG_PM
> +static int snd_opti9xx_pnp_suspend(struct pnp_card_link *pcard,
> +				   pm_message_t state)
> +{
> +	return snd_opti9xx_suspend(pnp_get_card_drvdata(pcard));
> +}
> +
> +static int snd_opti9xx_pnp_resume(struct pnp_card_link *pcard)
> +{
> +	return snd_opti9xx_resume(pnp_get_card_drvdata(pcard));
> +}
> +#endif
> +
>  static struct pnp_card_driver opti9xx_pnpc_driver = {
>  	.flags		= PNP_DRIVER_RES_DISABLE,
>  	.name		= "opti9xx",
>  	.id_table	= snd_opti9xx_pnpids,
>  	.probe		= snd_opti9xx_pnp_probe,
>  	.remove		= __devexit_p(snd_opti9xx_pnp_remove),
> +#ifdef CONFIG_PM
> +	.suspend	= snd_opti9xx_pnp_suspend,
> +	.resume		= snd_opti9xx_pnp_resume,
> +#endif
>  };
>  #endif
>  
> 
> -- 
> Ondrej Zary
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> 

      parent reply	other threads:[~2012-07-17  8:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-17  7:16 Ondrej Zary
2012-07-17  8:38 ` [alsa-devel] " Rajeev kumar
2012-07-17  8:51   ` Ondrej Zary
2012-07-17  9:01     ` Rajeev kumar
2012-07-17  8:57 ` Takashi Iwai [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hy5min4t0.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rainbow-software.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome