From: Takashi Iwai <tiwai@suse.de>
To: David Flater <vger@flaterco.com>
Cc: Alsa Devel <alsa-devel@vger.kernel.org>,
Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv2] sound: fix emu8000 DRAM sized 512 KiB too small
Date: Tue, 28 Aug 2012 20:01:22 +0200 [thread overview]
Message-ID: <s5hzk5e6glp.wl%tiwai@suse.de> (raw)
In-Reply-To: <503C2C11.8020202@flaterco.com>
At Mon, 27 Aug 2012 22:25:21 -0400,
David Flater wrote:
>
> v2: Fixed result still wrong in the case of 512 KiB DRAM. Oops.
>
> Applicable to 3.5.3 mainline.
>
> In emu8000.c, size_dram determines the amount of memory on the sound card by
> doing write/readback tests starting at 512 KiB and incrementing by 512 KiB.
> On success, detected_size is updated to the successful address and testing
> continues. On failure, the loop is immediately exited. The resulting
> detected_size is 512 KiB too small except in two special cases:
>
> 1. If there is no memory, the initial 0 value of detected_size is used, which
> is correct.
> 2. If the address space wraps around, detected_size is updated before the
> bailout, so the result is correct.
>
> The patch corrects all cases and was tested with an AWE64 Gold. Before:
> EMU8000 [0x620]: 3584 Kb on-board memory detected
> asfxload 4GMGSMT.SF2 (4174814 B) fails.
> After:
> EMU8000 [0x620]: 4096 Kb on-board memory detected
> asfxload 4GMGSMT.SF2 succeeds.
>
> I do not have a card with 512 KiB to test with, but by forcibly enabling the
> added conditional I verified on the AWE64 Gold that it detects 512 KiB
> (successfully reading from the first memory location) and does not hang the
> card.
>
> C.f. Bug 46451 https://bugzilla.kernel.org/show_bug.cgi?id=46451
>
> Signed-off-by: David Flater <dave@flaterco.com>
Thanks, applied.
Takashi
> ---
>
> --- linux-3.5.3-nameless/sound/isa/sb/emu8000.c.orig 2012-08-25 22:32:13.000000000 -0400
> +++ linux-3.5.3-nameless/sound/isa/sb/emu8000.c 2012-08-27 22:06:15.729510037 -0400
> @@ -417,9 +417,6 @@ size_dram(struct snd_emu8000 *emu)
> EMU8000_SMLD_READ(emu); /* discard stale data */
> if (EMU8000_SMLD_READ(emu) != UNIQUE_ID2)
> break; /* no memory at this address */
> -
> - detected_size = size;
> -
> snd_emu8000_read_wait(emu);
>
> /*
> @@ -432,6 +429,18 @@ size_dram(struct snd_emu8000 *emu)
> if (EMU8000_SMLD_READ(emu) != UNIQUE_ID1)
> break; /* we must have wrapped around */
> snd_emu8000_read_wait(emu);
> +
> + /* Otherwise, it's valid memory. */
> + detected_size = size + 512 * 1024;
> + }
> +
> + /* Distinguish 512 KiB from 0. */
> + if (detected_size == 0) {
> + snd_emu8000_read_wait(emu);
> + EMU8000_SMALR_WRITE(emu, EMU8000_DRAM_OFFSET);
> + EMU8000_SMLD_READ(emu); /* discard stale data */
> + if (EMU8000_SMLD_READ(emu) == UNIQUE_ID1)
> + detected_size = 512 * 1024;
> }
>
> /* wait until FULL bit in SMAxW register is false */
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
prev parent reply other threads:[~2012-08-28 18:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-28 0:30 [PATCH] " David Flater
2012-08-28 2:25 ` [PATCHv2] " David Flater
2012-08-28 18:01 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hzk5e6glp.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vger@flaterco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®