From: sashiko-bot@kernel.org
To: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>
Cc: linux-rt-devel@lists.linux.dev, devicetree@vger.kernel.org,
linux-perf-users@vger.kernel.org, robh@kernel.org,
conor+dt@kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 5/7] perf: add MIPS Coherence Manager 3 (CM3) PMU driver
Date: Thu, 19 Nov 2026 18:17:44 +0000 [thread overview]
Message-ID: <sashiko-outbox-223763@kernel.org> (raw)
In-Reply-To: <20261119-i6500-cm3-pmu-v3-5-c86410934b51@mobileye.com>
Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [Medium] perf: mips_cm3_pmu: counter overflow double-counting in
cm3_pmu_update()
- [Low] perf: mips_cm3_pmu: WARN_ON() in cm3_pmu_online_cpu() when
!CONFIG_SMP
--
commit 51299d17e3e40c4c71d192990c0a48a22c2de2cb
Author: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
perf: add MIPS Coherence Manager 3 (CM3) PMU driver
This commit adds an uncore PMU driver and documentation for the MIPS
Coherence Manager 3 (CM3) performance counters.
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 245e7bb763b99..2dbed2fc7b030 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -75,6 +75,18 @@ config ARM_XSCALE_PMU
> depends on ARM_PMU && CPU_XSCALE
> def_bool y
>
> +config MIPS_CM3_PMU
> + tristate "MIPS Coherence Manager 3 (CM3) PMU"
> + depends on MIPS_CM
[Severity: Low]
Should MIPS_CM3_PMU depend on MIPS_CPS (or SMP) rather than just MIPS_CM?
MIPS_GIC selects MIPS_CM even when CONFIG_SMP=n and CONFIG_MIPS_CPS=n.
On a !CONFIG_SMP build, cpuhp_state_add_instance() still invokes
cm3_pmu_online_cpu() on the boot CPU, where the !CONFIG_SMP stub for
irq_set_affinity() returns -EINVAL and triggers WARN_ON() whenever an
overflow IRQ is present. Without CONFIG_MIPS_CPS, cps_smp_setup() also
never populates the cluster ID in cpu_data[].globalnumber.
> diff --git a/drivers/perf/mips_cm3_pmu.c b/drivers/perf/mips_cm3_pmu.c
> new file mode 100644
> index 0000000000000..6d53535473b96
> --- /dev/null
> +++ b/drivers/perf/mips_cm3_pmu.c
[ ... ]
> +static void cm3_pmu_update(struct perf_event *event)
> +{
> + struct cm3_pmu *cm3_pmu = to_cm3_pmu(event->pmu);
> + struct hw_perf_event *hwc = &event->hw;
> + u32 ov_bit = cm3_pmu_overflow_bit(hwc->idx);
> + u64 delta, prev, new;
> + bool overflowed = false;
> +
> + /* Counts were harvested when the cluster went down, nothing since */
> + if (READ_ONCE(cm3_pmu->paused))
> + return;
> +
> + /*
> + * When polling, the counter cannot wrap twice between two reads and
> + * the 32-bit difference tells the whole story. With the overflow
> + * interrupt the counter is only read on demand and may have made a
> + * full turn since the last read, which the overflow status tells.
> + * It is read and cleared before the counter so that a wrap seen
> + * here is also reflected in the counter value; a wrap happening in
> + * between is accounted by the next update, which the interrupt it
> + * raises makes sure happens. In interrupt mode every access to the
> + * event runs on cm3_pmu->on_cpu with interrupts disabled, so the
> + * status and the counter are read consistently.
> + */
> + if (cm3_pmu->irq > 0) {
> + overflowed = CM3_PMU_READ(cm3_pmu, pc_ov) & ov_bit;
> + if (overflowed)
> + CM3_PMU_WRITE(cm3_pmu, pc_ov, ov_bit);
> + }
> +
> + do {
> + prev = local64_read(&hwc->prev_count);
> + new = cm3_pmu_read_counter(cm3_pmu, hwc->idx);
> + } while (local64_cmpxchg(&hwc->prev_count, prev, new) != prev);
> +
> + /*
> + * If the counter wrapped and now shows a value not below the
> + * previous one, it made a full turn on top of the 32-bit difference.
> + */
> + delta = (new - prev) & CM3_PMU_COUNTER_MASK;
> + if (overflowed && new >= prev)
> + delta += CM3_PMU_COUNTER_MASK + 1;
> +
> + local64_add(delta, &event->count);
> +}
[Severity: Medium]
Can cm3_pmu_update() double-count a counter wrap in interrupt mode and
add an extra 2^32 to event->count?
If hwc->prev_count holds a non-zero value prev (from an earlier read) and
the counter wraps past 0xffffffff to a small value new < prev right after
pc_ov is read as 0 but before cm3_pmu_read_counter() runs, then:
1. This call sees overflowed == false and new < prev, so
delta = (new - prev) & CM3_PMU_COUNTER_MASK already accounts for the
wrap across 0xffffffff -> 0, and hwc->prev_count becomes new.
2. Because the wrap happened after reading pc_ov, ov_bit remains latched
in pc_ov and the overflow interrupt fires next.
3. cm3_pmu_handle_irq() -> cm3_pmu_update() now sees overflowed == true
and new >= prev (relative to the already post-wrap prev), so
if (overflowed && new >= prev) adds CM3_PMU_COUNTER_MASK + 1 a second
time for the same wrap.
Also, Documentation/admin-guide/perf/mips_cm3_pmu.rst notes that the CM3
asserts so_cm_perf_cnt_int when a counter reaches 0xffffffff. If
cm3_pmu_update() reads the counter while it is still at 0xffffffff with
overflowed == true, new == 0xffffffff satisfies new >= prev for any
32-bit prev, adding 2^32 before the counter actually wraps to 0 on the
next event.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261119-i6500-cm3-pmu-v3-0-c86410934b51@mobileye.com?part=5
next prev parent reply other threads:[~2026-11-19 18:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 17:51 [PATCH v3 0/7] perf: add PMU driver for the MIPS Coherence Manager 3 performance counters Vladimir Kondratiev
2026-11-19 17:51 ` [PATCH v3 1/7] mips: {cm,cpc}: Make cm_core_lock, cpc_core_lock raw spinlocks Vladimir Kondratiev
2026-11-19 17:51 ` [PATCH v3 2/7] MIPS: CM: add CM3 performance counter GCR definitions Vladimir Kondratiev
2026-11-19 17:51 ` [PATCH v3 3/7] MIPS: CM: export the symbols needed to access the GCRs from a module Vladimir Kondratiev
2026-11-19 17:51 ` [PATCH v3 4/7] dt-bindings: mips: mti,mips-cm: add performance counter interrupt Vladimir Kondratiev
2026-11-19 17:51 ` [PATCH v3 5/7] perf: add MIPS Coherence Manager 3 (CM3) PMU driver Vladimir Kondratiev
2026-11-19 18:17 ` sashiko-bot [this message]
2026-11-19 17:51 ` [PATCH v3 6/7] MIPS: eyeq6_defconfig: enable the CM3 PMU Vladimir Kondratiev
2026-11-19 17:51 ` [PATCH v3 7/7] MAINTAINERS: Add entry for MIPS " Vladimir Kondratiev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-223763@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-perf-users@vger.kernel.org \
--cc=linux-rt-devel@lists.linux.dev \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®