From: Davide Libenzi <davidel@xmailserver.org>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Ingo Molnar <mingo@elte.hu>,
Suparna Bhattacharya <suparna@in.ibm.com>,
Zach Brown <zach.brown@oracle.com>,
Benjamin LaHaise <bcrl@kvack.org>
Subject: [patch 10/13] signal/timer/event fds v8 - eventfd core ...
Date: Tue, 20 Mar 2007 11:37:14 -0700 [thread overview]
Message-ID: <send-serie.davidel@xmailserver.org.28743.1174415840.10> (raw)
This is a very simple and light file descriptor, that can be used as
event wait/dispatch by userspace (both wait and dispatch) and by the
kernel (dispatch only). It can be used instead of pipe(2) in all cases
where those would simply be used to signal events. Their kernel overhead
is much lower than pipes, and they do not consume two fds. When used in
the kernel, it can offer an fd-bridge to enable, for example, functionalities
like KAIO or syslets/threadlets to signal to an fd the completion of certain
operations. But more in general, an eventfd can be used by the kernel to
signal readiness, in a POSIX poll/select way, of interfaces that would
otherwise be incompatible with it. The API is:
int eventfd(unsigned int count);
The eventfd API accepts an initial "count" parameter, and returns an
eventfd fd. It supports poll(2) (POLLIN, POLLOUT, POLLERR), read(2) and write(2).
The POLLIN flag is raised when the internal counter is greater than zero.
The POLLOUT flag is raised when at least a value of "1" can be written to
the internal counter.
The POLLERR flag is raised when an overflow in the counter value is detected.
The write(2) operation can never overflow the counter, since it blocks
(unless O_NONBLOCK is set, in which case -EAGAIN is returned).
But the eventfd_signal() function can do it, since it's supposed to not
sleep during its operation.
The read(2) function reads the __u64 counter value, and reset the internal
value to zero. If the value read is equal to (__u64) -1, an overflow
happened on the internal counter (due to 2^64 eventfd_signal() posts
that has never been retired - unlickely, but possible).
The write(2) call writes an __u64 count value, and adds it
to the current counter. The eventfd fd supports O_NONBLOCK also.
On the kernel side, we have:
struct file *eventfd_fget(int fd);
int eventfd_signal(struct file *file, unsigned int n);
The eventfd_fget() should be called to get a struct file* from an eventfd
fd (this is an fget() + check of f_op being an eventfd fops pointer).
The kernel can then call eventfd_signal() every time it wants to post
an event to userspace. The eventfd_signal() function can be called from any
context.
An eventfd() simple test and bench is available here:
http://www.xmailserver.org/eventfd-bench.c
This is the eventfd-based version of pipetest-4 (pipe(2) based):
http://www.xmailserver.org/pipetest-4.c
Not that performance matters much in the eventfd case, but eventfd-bench
shows almost as double as performance than pipetest-4.
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
- Davide
Index: linux-2.6.21-rc3.quilt/fs/Makefile
===================================================================
--- linux-2.6.21-rc3.quilt.orig/fs/Makefile 2007-03-19 19:01:52.000000000 -0700
+++ linux-2.6.21-rc3.quilt/fs/Makefile 2007-03-19 19:01:58.000000000 -0700
@@ -11,7 +11,7 @@
attr.o bad_inode.o file.o filesystems.o namespace.o aio.o \
seq_file.o xattr.o libfs.o fs-writeback.o \
pnode.o drop_caches.o splice.o sync.o utimes.o \
- stack.o anon_inodes.o signalfd.o timerfd.o
+ stack.o anon_inodes.o signalfd.o timerfd.o eventfd.o
ifeq ($(CONFIG_BLOCK),y)
obj-y += buffer.o bio.o block_dev.o direct-io.o mpage.o ioprio.o
Index: linux-2.6.21-rc3.quilt/include/linux/syscalls.h
===================================================================
--- linux-2.6.21-rc3.quilt.orig/include/linux/syscalls.h 2007-03-19 19:01:52.000000000 -0700
+++ linux-2.6.21-rc3.quilt/include/linux/syscalls.h 2007-03-19 19:01:58.000000000 -0700
@@ -605,6 +605,7 @@
asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask);
asmlinkage long sys_timerfd(int ufd, int clockid, int flags,
const struct itimerspec __user *utmr);
+asmlinkage long sys_eventfd(unsigned int count);
int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
Index: linux-2.6.21-rc3.quilt/fs/eventfd.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.21-rc3.quilt/fs/eventfd.c 2007-03-19 19:01:58.000000000 -0700
@@ -0,0 +1,237 @@
+/*
+ * fs/eventfd.c
+ *
+ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#include <linux/file.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/mount.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/jiffies.h>
+#include <linux/anon_inodes.h>
+#include <linux/eventfd.h>
+
+#include <asm/uaccess.h>
+
+
+
+struct eventfd_ctx {
+ spinlock_t lock;
+ wait_queue_head_t wqh;
+ __u64 count;
+};
+
+
+static int eventfd_close(struct inode *inode, struct file *file);
+static unsigned int eventfd_poll(struct file *file, poll_table *wait);
+static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos);
+static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t count,
+ loff_t *ppos);
+
+
+
+static const struct file_operations eventfd_fops = {
+ .release = eventfd_close,
+ .poll = eventfd_poll,
+ .read = eventfd_read,
+ .write = eventfd_write,
+};
+
+
+
+struct file *eventfd_fget(int fd)
+{
+ struct file *file;
+
+ file = fget(fd);
+ if (!file)
+ return ERR_PTR(-EBADF);
+ if (file->f_op != &eventfd_fops) {
+ fput(file);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return file;
+}
+
+/*
+ * This function is supposed to be called by the kernel in paths
+ * that do not allow to sleep. In this function we allow the counter
+ * to reach the ULLONG_MAX value, and we signal this as overflow
+ * condition by returining a POLLERR to poll(2).
+ */
+int eventfd_signal(struct file *file, int n)
+{
+ struct eventfd_ctx *ctx = file->private_data;
+ unsigned long flags;
+
+ if (n < 0)
+ return -EINVAL;
+ spin_lock_irqsave(&ctx->lock, flags);
+ if (ULLONG_MAX - ctx->count < n)
+ n = (int) (ULLONG_MAX - ctx->count);
+ ctx->count += n;
+ if (waitqueue_active(&ctx->wqh))
+ wake_up_locked(&ctx->wqh);
+ spin_unlock_irqrestore(&ctx->lock, flags);
+
+ return n;
+}
+
+asmlinkage long sys_eventfd(unsigned int count)
+{
+ int error, fd;
+ struct eventfd_ctx *ctx;
+ struct file *file;
+ struct inode *inode;
+
+ ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ init_waitqueue_head(&ctx->wqh);
+ spin_lock_init(&ctx->lock);
+ ctx->count = count;
+
+ /*
+ * When we call this, the initialization must be complete, since
+ * aino_getfd() will install the fd.
+ */
+ error = aino_getfd(&fd, &inode, &file, "[eventfd]",
+ &eventfd_fops, ctx);
+ if (!error)
+ return fd;
+
+ kfree(ctx);
+ return error;
+}
+
+static int eventfd_close(struct inode *inode, struct file *file)
+{
+ kfree(file->private_data);
+ return 0;
+}
+
+static unsigned int eventfd_poll(struct file *file, poll_table *wait)
+{
+ struct eventfd_ctx *ctx = file->private_data;
+ unsigned int events = 0;
+ unsigned long flags;
+
+ poll_wait(file, &ctx->wqh, wait);
+
+ spin_lock_irqsave(&ctx->lock, flags);
+ if (ctx->count > 0)
+ events |= POLLIN;
+ if (ctx->count == ULLONG_MAX)
+ events |= POLLERR;
+ if (ULLONG_MAX - 1 > ctx->count)
+ events |= POLLOUT;
+ spin_unlock_irqrestore(&ctx->lock, flags);
+
+ return events;
+}
+
+static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct eventfd_ctx *ctx = file->private_data;
+ ssize_t res;
+ __u64 ucnt;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (count < sizeof(ucnt))
+ return -EINVAL;
+ spin_lock_irq(&ctx->lock);
+ res = -EAGAIN;
+ ucnt = ctx->count;
+ if (ucnt > 0)
+ res = sizeof(ucnt);
+ else if (!(file->f_flags & O_NONBLOCK)) {
+ __add_wait_queue(&ctx->wqh, &wait);
+ for (res = 0;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (ctx->count > 0) {
+ ucnt = ctx->count;
+ res = sizeof(ucnt);
+ break;
+ }
+ if (signal_pending(current)) {
+ res = -ERESTARTSYS;
+ break;
+ }
+ spin_unlock_irq(&ctx->lock);
+ schedule();
+ spin_lock_irq(&ctx->lock);
+ }
+ __remove_wait_queue(&ctx->wqh, &wait);
+ __set_current_state(TASK_RUNNING);
+ }
+ if (res > 0) {
+ ctx->count = 0;
+ if (waitqueue_active(&ctx->wqh))
+ wake_up_locked(&ctx->wqh);
+ }
+ spin_unlock_irq(&ctx->lock);
+ if (res > 0 && put_user(ucnt, (__u64 __user *) buf))
+ return -EFAULT;
+
+ return res;
+}
+
+static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct eventfd_ctx *ctx = file->private_data;
+ ssize_t res;
+ __u64 ucnt;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (count < sizeof(ucnt))
+ return -EINVAL;
+ if (get_user(ucnt, (const __u64 __user *) buf))
+ return -EFAULT;
+ if (ucnt == ULLONG_MAX)
+ return -EINVAL;
+ spin_lock_irq(&ctx->lock);
+ res = -EAGAIN;
+ if (ULLONG_MAX - ctx->count > ucnt)
+ res = sizeof(ucnt);
+ else if (!(file->f_flags & O_NONBLOCK)) {
+ __add_wait_queue(&ctx->wqh, &wait);
+ for (res = 0;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (ULLONG_MAX - ctx->count > ucnt) {
+ res = sizeof(ucnt);
+ break;
+ }
+ if (signal_pending(current)) {
+ res = -ERESTARTSYS;
+ break;
+ }
+ spin_unlock_irq(&ctx->lock);
+ schedule();
+ spin_lock_irq(&ctx->lock);
+ }
+ __remove_wait_queue(&ctx->wqh, &wait);
+ __set_current_state(TASK_RUNNING);
+ }
+ if (res > 0) {
+ ctx->count += ucnt;
+ if (waitqueue_active(&ctx->wqh))
+ wake_up_locked(&ctx->wqh);
+ }
+ spin_unlock_irq(&ctx->lock);
+
+ return res;
+}
+
Index: linux-2.6.21-rc3.quilt/include/linux/eventfd.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.21-rc3.quilt/include/linux/eventfd.h 2007-03-19 19:01:58.000000000 -0700
@@ -0,0 +1,20 @@
+/*
+ * include/linux/eventfd.h
+ *
+ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_EVENTFD_H
+#define _LINUX_EVENTFD_H
+
+
+#ifdef __KERNEL__
+
+struct file *eventfd_fget(int fd);
+int eventfd_signal(struct file *file, int n);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_EVENTFD_H */
+
next reply other threads:[~2007-03-20 18:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-20 18:37 Davide Libenzi [this message]
2007-03-30 19:40 ` Andrew Morton
2007-03-31 1:11 ` Davide Libenzi
2007-03-31 1:14 ` Davide Libenzi
2007-03-31 1:26 ` Andrew Morton
2007-03-31 19:50 ` Davide Libenzi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=send-serie.davidel@xmailserver.org.28743.1174415840.10 \
--to=davidel@xmailserver.org \
--cc=akpm@linux-foundation.org \
--cc=bcrl@kvack.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=suparna@in.ibm.com \
--cc=torvalds@linux-foundation.org \
--cc=zach.brown@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome