mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hirokazu Takata <takata@linux-m32r.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, takata@linux-m32r.org,
	hitoshiy@linux-m32r.org
Subject: [PATCH] m32r: Fix ei_tx_timeout() in drivers/net/lib8390.c
Date: Thu, 26 Jul 2007 01:58:44 +0900	[thread overview]
Message-ID: <swflkd42zej.wl%takata@linux-m32r.org> (raw)

Change INT0 trigger mode from edge-sense mode to level-sense mode,
in order to fix the following timeout error:
  'NETDEV WATCHDOG: eth0: transmit timed out'.

This patch is required only for the Mappi platform.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: Hitoshi Yamamoto <hitoshiy@linux-m32r.org>
---
 arch/m32r/kernel/setup_mappi.c |    5 +++--
 drivers/net/lib8390.c          |    9 ---------
 2 files changed, 3 insertions(+), 11 deletions(-)

diff --git a/arch/m32r/kernel/setup_mappi.c b/arch/m32r/kernel/setup_mappi.c
index 6b2d77d..fe73c9e 100644
--- a/arch/m32r/kernel/setup_mappi.c
+++ b/arch/m32r/kernel/setup_mappi.c
@@ -45,7 +45,8 @@ static void mask_and_ack_mappi(unsigned int irq)
 
 static void end_mappi_irq(unsigned int irq)
 {
-	enable_mappi_irq(irq);
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		enable_mappi_irq(irq);
 }
 
 static unsigned int startup_mappi_irq(unsigned int irq)
@@ -88,7 +89,7 @@ void __init init_IRQ(void)
 	irq_desc[M32R_IRQ_INT0].chip = &mappi_irq_type;
 	irq_desc[M32R_IRQ_INT0].action = NULL;
 	irq_desc[M32R_IRQ_INT0].depth = 1;
-	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
 	disable_mappi_irq(M32R_IRQ_INT0);
 #endif /* CONFIG_M32R_NE2000 */
 
diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index 5c86e73..721ee38 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c
@@ -219,15 +219,6 @@ static void ei_tx_timeout(struct net_device *dev)
 	int txsr, isr, tickssofar = jiffies - dev->trans_start;
 	unsigned long flags;
 
-#if defined(CONFIG_M32R) && defined(CONFIG_SMP)
-	unsigned long icucr;
-
-	local_irq_save(flags);
-	icucr = inl(M32R_ICU_CR1_PORTL);
-	icucr |= M32R_ICUCR_ISMOD11;
-	outl(icucr, M32R_ICU_CR1_PORTL);
-	local_irq_restore(flags);
-#endif
 	ei_local->stat.tx_errors++;
 
 	spin_lock_irqsave(&ei_local->page_lock, flags);
-- 
1.5.2.3

-- 
Hirokazu Takata <takata@linux-m32r.org>
Linux/M32R Project:  http://www.linux-m32r.org/

                 reply	other threads:[~2007-07-25 17:16 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=swflkd42zej.wl%takata@linux-m32r.org \
    --to=takata@linux-m32r.org \
    --cc=akpm@linux-foundation.org \
    --cc=hitoshiy@linux-m32r.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®