On Thu, Aug 28, 2025 at 08:50:58AM +0300, Svyatoslav Ryhel wrote:
> SOCTHERM is thermal sensor and thermal throttling controller found in Tegra
> SoC starting from Tegra114. Existing Tegra124 setup is mostly compatible
> with Tegra114 and needs only a few slight adjustmets of fuse calibration
> process.
> 
> ---
> Changes in v2:
> - no changes, resend.
> 
> Changes in v3:
> - expanded desciption of "thermal: tegra: soctherm-fuse: parametrize
>   configuration further" commit
> - changes title of "thermal: tegra: soctherm-fuse: parametrize
>   configuration further" to "thermal: tegra: soctherm-fuse: prepare
>   calibration for Tegra114 support"
> - Tegra11x > Tegra114 and Tegra12x > Tegra124
> - ft and cp shift bits dropped
> - clarified tegra114 precision
> - lower_precision > use_lower_precision
> - nominal calibration ft and cp hardcoded into SoC specific structures
> - added tegra114-soctherm header into dt-bindings
> 
> Changes in v4:
> - fixed Tegra124/132/210 cp mask
> - dropped TEGRA114_SOCTHERM_SENSOR_NUM from header
> - TEGRA_SOCTHERM_THROT_LEVEL_ made SoC specific
> - adjusted soctherm node and inclusions in tegra114.dtsi
> - dropped use_lower_presision and nominal_calib_cp options
> 
> Changes in v5:
> - fixed CPU and GPU hotspot offset values
> - added static_assert()s to assert the TEGRA114_* and TEGRA124_*
>   counterparts are equal
> ---
> 
> Svyatoslav Ryhel (6):
>   soc: tegra: fuse: add Tegra114 nvmem cells and fuse lookups
>   dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management
>     System
>   thermal: tegra: soctherm-fuse: prepare calibration for Tegra114
>     support
>   dt-bindings: thermal: add Tegra114 soctherm header
>   thermal: tegra: add Tegra114 specific SOCTHERM driver
>   ARM: tegra: Add SOCTHERM support on Tegra114

Hi Daniel,

there's a build-time dependency on patch 4 in both patches 5 and 6. Do
you want to pick up patches 2-5 from this series and I pick up patch 1
and hold off on applying patch 6 until after the merge window? We could
also do a shared branch, but it may not be worth the extra hassle.

Thanks,
Thierry