[PATCH] mmc: sdhci-s3c: check clk_prepare_enable return in probe

[Jiawen Liu <1298662399@qq.com>]

sdhci_s3c_probe() ignores the return value of
clk_prepare_enable(sc->clk_io). If this call fails, the clock is not
enabled, but the driver continues and later calls
clk_disable_unprepare() on it, leading to an unbalanced clock
disable/unprepare.

Fix this by checking the return value and propagating the error,
cleaning up only resources acquired before the failed enable.

Signed-off-by: jiawen <1298662399@qq.com>
---
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -534,7 +534,11 @@
 	}
 
 	/* enable the local io clock and keep it running for the moment. */
-	clk_prepare_enable(sc->clk_io);
+	ret = clk_prepare_enable(sc->clk_io);
+	if (ret) {
+		dev_err(dev, "failed to enable io clock\n");
+		return ret;
+	}
 
 	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
 		char name[14];