mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "tip-bot for Kirill A. Shutemov" <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: kirill.shutemov@linux.intel.com, tglx@linutronix.de,
	mingo@kernel.org, youling257@gmail.com,
	linux-kernel@vger.kernel.org, d.malkin@real-time-systems.com,
	hpa@zytor.com
Subject: [tip:x86/urgent] x86/boot/compressed/64: Validate trampoline placement against E820
Date: Thu, 2 Aug 2018 05:24:52 -0700	[thread overview]
Message-ID: <tip-1b3a62643660020cdc68e6139a010c06e8fc96c7@git.kernel.org> (raw)
In-Reply-To: <20180801133225.38121-1-kirill.shutemov@linux.intel.com>

Commit-ID:  1b3a62643660020cdc68e6139a010c06e8fc96c7
Gitweb:     https://git.kernel.org/tip/1b3a62643660020cdc68e6139a010c06e8fc96c7
Author:     Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
AuthorDate: Wed, 1 Aug 2018 16:32:25 +0300
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Thu, 2 Aug 2018 14:22:22 +0200

x86/boot/compressed/64: Validate trampoline placement against E820

There were two report of boot failure cased by trampoline placed into
a reserved memory region. It can happen on machines that don't report
EBDA correctly.

Fix the problem by re-validating the found address against the E820 table.
If the address is in a reserved area, find the next usable region below the
initial address.

Fixes: 3548e131ec6a ("x86/boot/compressed/64: Find a place for 32-bit trampoline")
Reported-by: Dmitry Malkin <d.malkin@real-time-systems.com>
Reported-by: youling 257 <youling257@gmail.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180801133225.38121-1-kirill.shutemov@linux.intel.com

---
 arch/x86/boot/compressed/pgtable_64.c | 73 ++++++++++++++++++++++++++---------
 1 file changed, 55 insertions(+), 18 deletions(-)

diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c
index 8c5107545251..9e2157371491 100644
--- a/arch/x86/boot/compressed/pgtable_64.c
+++ b/arch/x86/boot/compressed/pgtable_64.c
@@ -1,3 +1,4 @@
+#include <asm/e820/types.h>
 #include <asm/processor.h>
 #include "pgtable.h"
 #include "../string.h"
@@ -34,10 +35,62 @@ unsigned long *trampoline_32bit __section(.data);
 extern struct boot_params *boot_params;
 int cmdline_find_option_bool(const char *option);
 
+static unsigned long find_trampoline_placement(void)
+{
+	unsigned long bios_start, ebda_start;
+	unsigned long trampoline_start;
+	struct boot_e820_entry *entry;
+	int i;
+
+	/*
+	 * Find a suitable spot for the trampoline.
+	 * This code is based on reserve_bios_regions().
+	 */
+
+	ebda_start = *(unsigned short *)0x40e << 4;
+	bios_start = *(unsigned short *)0x413 << 10;
+
+	if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX)
+		bios_start = BIOS_START_MAX;
+
+	if (ebda_start > BIOS_START_MIN && ebda_start < bios_start)
+		bios_start = ebda_start;
+
+	bios_start = round_down(bios_start, PAGE_SIZE);
+
+	/* Find the first usable memory region under bios_start. */
+	for (i = boot_params->e820_entries - 1; i >= 0; i--) {
+		entry = &boot_params->e820_table[i];
+
+		/* Skip all entries above bios_start. */
+		if (bios_start <= entry->addr)
+			continue;
+
+		/* Skip non-RAM entries. */
+		if (entry->type != E820_TYPE_RAM)
+			continue;
+
+		/* Adjust bios_start to the end of the entry if needed. */
+		if (bios_start > entry->addr + entry->size)
+			bios_start = entry->addr + entry->size;
+
+		/* Keep bios_start page-aligned. */
+		bios_start = round_down(bios_start, PAGE_SIZE);
+
+		/* Skip the entry if it's too small. */
+		if (bios_start - TRAMPOLINE_32BIT_SIZE < entry->addr)
+			continue;
+
+		break;
+	}
+
+	/* Place the trampoline just below the end of low memory */
+	return bios_start - TRAMPOLINE_32BIT_SIZE;
+}
+
 struct paging_config paging_prepare(void *rmode)
 {
 	struct paging_config paging_config = {};
-	unsigned long bios_start, ebda_start;
 
 	/* Initialize boot_params. Required for cmdline_find_option_bool(). */
 	boot_params = rmode;
@@ -61,23 +114,7 @@ struct paging_config paging_prepare(void *rmode)
 		paging_config.l5_required = 1;
 	}
 
-	/*
-	 * Find a suitable spot for the trampoline.
-	 * This code is based on reserve_bios_regions().
-	 */
-
-	ebda_start = *(unsigned short *)0x40e << 4;
-	bios_start = *(unsigned short *)0x413 << 10;
-
-	if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX)
-		bios_start = BIOS_START_MAX;
-
-	if (ebda_start > BIOS_START_MIN && ebda_start < bios_start)
-		bios_start = ebda_start;
-
-	/* Place the trampoline just below the end of low memory, aligned to 4k */
-	paging_config.trampoline_start = bios_start - TRAMPOLINE_32BIT_SIZE;
-	paging_config.trampoline_start = round_down(paging_config.trampoline_start, PAGE_SIZE);
+	paging_config.trampoline_start = find_trampoline_placement();
 
 	trampoline_32bit = (unsigned long *)paging_config.trampoline_start;
 

      reply	other threads:[~2018-08-02 12:25 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-01 13:32 [PATCH] x86/boot/compressed/64: Validate trampoline placement against e820 Kirill A. Shutemov
2018-08-02 12:24 ` tip-bot for Kirill A. Shutemov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tip-1b3a62643660020cdc68e6139a010c06e8fc96c7@git.kernel.org \
    --to=tipbot@zytor.com \
    --cc=d.malkin@real-time-systems.com \
    --cc=hpa@zytor.com \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=youling257@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome