From: tip-bot for Jan Beulich <JBeulich@suse.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
a.p.zijlstra@chello.nl, torvalds@linux-foundation.org,
jbeulich@suse.com, akpm@linux-foundation.org, JBeulich@suse.com,
tglx@linutronix.de
Subject: [tip:x86/mm] x86-64: Fix accounting in kernel_physical_mapping_init()
Date: Fri, 18 May 2012 03:51:21 -0700 [thread overview]
Message-ID: <tip-20167d3421a089a1bf1bd680b150dc69c9506810@git.kernel.org> (raw)
In-Reply-To: <4FB3C27202000078000841A0@nat28.tlf.novell.com>
Commit-ID: 20167d3421a089a1bf1bd680b150dc69c9506810
Gitweb: http://git.kernel.org/tip/20167d3421a089a1bf1bd680b150dc69c9506810
Author: Jan Beulich <JBeulich@suse.com>
AuthorDate: Wed, 16 May 2012 14:06:26 +0100
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Fri, 18 May 2012 10:13:37 +0200
x86-64: Fix accounting in kernel_physical_mapping_init()
When finding a present and acceptable 2M/1G mapping, the number
of pages mapped this way shouldn't be incremented (as it was
already incremented when the earlier part of the mapping was
established). Instead, last_map_addr needs to be updated in this
case.
Further, address increments were wrong in one place each in both
phys_pmd_init() and phys_pud_init() (lacking the aligning down
to the respective page boundary).
As we're now doing the same calculation several times, fold it
into a single instance using a local variable (matching how
kernel_physical_mapping_init() itself does it at the PGD level).
Observed during code inspection, not because of an actual
problem.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4FB3C27202000078000841A0@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/mm/init_64.c | 23 +++++++++++++----------
1 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 436a030..f9476a0 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -408,12 +408,12 @@ static unsigned long __meminit
phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
unsigned long page_size_mask, pgprot_t prot)
{
- unsigned long pages = 0;
+ unsigned long pages = 0, next;
unsigned long last_map_addr = end;
int i = pmd_index(address);
- for (; i < PTRS_PER_PMD; i++, address += PMD_SIZE) {
+ for (; i < PTRS_PER_PMD; i++, address = next) {
unsigned long pte_phys;
pmd_t *pmd = pmd_page + pmd_index(address);
pte_t *pte;
@@ -427,6 +427,8 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
break;
}
+ next = (address & PMD_MASK) + PMD_SIZE;
+
if (pmd_val(*pmd)) {
if (!pmd_large(*pmd)) {
spin_lock(&init_mm.page_table_lock);
@@ -450,7 +452,7 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
* attributes.
*/
if (page_size_mask & (1 << PG_LEVEL_2M)) {
- pages++;
+ last_map_addr = next;
continue;
}
new_prot = pte_pgprot(pte_clrhuge(*(pte_t *)pmd));
@@ -463,7 +465,7 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
pfn_pte(address >> PAGE_SHIFT,
__pgprot(pgprot_val(prot) | _PAGE_PSE)));
spin_unlock(&init_mm.page_table_lock);
- last_map_addr = (address & PMD_MASK) + PMD_SIZE;
+ last_map_addr = next;
continue;
}
@@ -483,11 +485,11 @@ static unsigned long __meminit
phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
unsigned long page_size_mask)
{
- unsigned long pages = 0;
+ unsigned long pages = 0, next;
unsigned long last_map_addr = end;
int i = pud_index(addr);
- for (; i < PTRS_PER_PUD; i++, addr = (addr & PUD_MASK) + PUD_SIZE) {
+ for (; i < PTRS_PER_PUD; i++, addr = next) {
unsigned long pmd_phys;
pud_t *pud = pud_page + pud_index(addr);
pmd_t *pmd;
@@ -496,8 +498,9 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
if (addr >= end)
break;
- if (!after_bootmem &&
- !e820_any_mapped(addr, addr+PUD_SIZE, 0)) {
+ next = (addr & PUD_MASK) + PUD_SIZE;
+
+ if (!after_bootmem && !e820_any_mapped(addr, next, 0)) {
set_pud(pud, __pud(0));
continue;
}
@@ -524,7 +527,7 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
* attributes.
*/
if (page_size_mask & (1 << PG_LEVEL_1G)) {
- pages++;
+ last_map_addr = next;
continue;
}
prot = pte_pgprot(pte_clrhuge(*(pte_t *)pud));
@@ -536,7 +539,7 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
set_pte((pte_t *)pud,
pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
spin_unlock(&init_mm.page_table_lock);
- last_map_addr = (addr & PUD_MASK) + PUD_SIZE;
+ last_map_addr = next;
continue;
}
prev parent reply other threads:[~2012-05-18 10:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-16 13:06 [PATCH] x86-64: fix " Jan Beulich
2012-05-18 10:51 ` tip-bot for Jan Beulich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-20167d3421a089a1bf1bd680b150dc69c9506810@git.kernel.org \
--to=jbeulich@suse.com \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome