From: tip-bot for Vikas C Sajjan <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: vikas.cha.sajjan@hpe.com, sunil.vl@hpe.com, mingo@kernel.org,
linux-kernel@vger.kernel.org, rafael.j.wysocki@intel.com,
tglx@linutronix.de, abdul-lateef.attar@hpe.com, hpa@zytor.com
Subject: [tip:x86/urgent] x86/acpi: Handle SCI interrupts above legacy space gracefully
Date: Fri, 17 Nov 2017 07:26:12 -0800 [thread overview]
Message-ID: <tip-252714155f04c5d16989cb3aadb85fd1b5772f99@git.kernel.org> (raw)
In-Reply-To: <1510848825-21965-2-git-send-email-vikas.cha.sajjan@hpe.com>
Commit-ID: 252714155f04c5d16989cb3aadb85fd1b5772f99
Gitweb: https://git.kernel.org/tip/252714155f04c5d16989cb3aadb85fd1b5772f99
Author: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
AuthorDate: Thu, 16 Nov 2017 21:43:44 +0530
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Fri, 17 Nov 2017 15:30:33 +0100
x86/acpi: Handle SCI interrupts above legacy space gracefully
Platforms which support only IOAPIC mode, pass the SCI information above
the legacy space (0-15) via the FADT mechanism and not via MADT.
In such cases mp_override_legacy_irq() which is invoked from
acpi_sci_ioapic_setup() to register SCI interrupts fails for interrupts
greater equal 16, since it is meant to handle only the legacy space and
emits error "Invalid bus_irq %u for legacy override".
Add a new function to handle SCI interrupts >= 16 and invoke it
conditionally in acpi_sci_ioapic_setup().
The code duplication due to this new function will be cleaned up in a
separate patch.
Co-developed-by: Sunil V L <sunil.vl@hpe.com>
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Signed-off-by: Sunil V L <sunil.vl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Abdul Lateef Attar <abdul-lateef.attar@hpe.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: kkamagui@gmail.com
Cc: linux-acpi@vger.kernel.org
Link: https://lkml.kernel.org/r/1510848825-21965-2-git-send-email-vikas.cha.sajjan@hpe.com
---
arch/x86/kernel/acpi/boot.c | 34 +++++++++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index ef9e02e..7615379 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -429,6 +429,34 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
return 0;
}
+static int __init mp_register_ioapic_irq(u8 bus_irq, u8 polarity,
+ u8 trigger, u32 gsi)
+{
+ struct mpc_intsrc mp_irq;
+ int ioapic, pin;
+
+ /* Convert 'gsi' to 'ioapic.pin'(INTIN#) */
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0) {
+ pr_warn("Failed to find ioapic for gsi : %u\n", gsi);
+ return ioapic;
+ }
+
+ pin = mp_find_ioapic_pin(ioapic, gsi);
+
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (trigger << 2) | polarity;
+ mp_irq.srcbus = MP_ISA_BUS;
+ mp_irq.srcbusirq = bus_irq;
+ mp_irq.dstapic = mpc_ioapic_id(ioapic);
+ mp_irq.dstirq = pin;
+
+ mp_save_irq(&mp_irq);
+
+ return 0;
+}
+
static int __init
acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
{
@@ -473,7 +501,11 @@ static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger,
if (acpi_sci_flags & ACPI_MADT_POLARITY_MASK)
polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
- mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
+ if (bus_irq < NR_IRQS_LEGACY)
+ mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
+ else
+ mp_register_ioapic_irq(bus_irq, polarity, trigger, gsi);
+
acpi_penalize_sci_irq(bus_irq, trigger, polarity);
/*
next prev parent reply other threads:[~2017-11-17 15:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-16 16:13 [PATCH v3 0/2] Fix improper handling of SCI INT for platforms supporting only IOAPIC mode Vikas C Sajjan
2017-11-16 16:13 ` [PATCH v3 1/2] acpi/x86: " Vikas C Sajjan
2017-11-17 10:38 ` Thomas Gleixner
2017-11-17 14:00 ` Sajjan, Vikas C
2017-11-17 15:26 ` tip-bot for Vikas C Sajjan [this message]
2017-11-16 16:13 ` [PATCH v3 2/2] acpi/x86: Reuse the mp_register_ioapic_irq() in the function mp_override_legacy_irq() Vikas C Sajjan
2017-11-17 15:26 ` [tip:x86/urgent] x86/acpi: Reduce code duplication in mp_override_legacy_irq() tip-bot for Vikas C Sajjan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-252714155f04c5d16989cb3aadb85fd1b5772f99@git.kernel.org \
--to=tipbot@zytor.com \
--cc=abdul-lateef.attar@hpe.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=rafael.j.wysocki@intel.com \
--cc=sunil.vl@hpe.com \
--cc=tglx@linutronix.de \
--cc=vikas.cha.sajjan@hpe.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome