From: "tip-bot for Kirill A. Shutemov" <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: hughd@google.com, eric.dumazet@gmail.com, hpa@zytor.com,
mingo@kernel.org, tglx@linutronix.de,
torvalds@linux-foundation.org, peterz@infradead.org,
kirill.shutemov@linux.intel.com, linux-kernel@vger.kernel.org
Subject: [tip:x86/urgent] x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline()
Date: Wed, 16 May 2018 03:35:52 -0700 [thread overview]
Message-ID: <tip-5c9b0b1c49881c680d4a56b9d9e03dfb3160fd4d@git.kernel.org> (raw)
In-Reply-To: <20180516080131.27913-2-kirill.shutemov@linux.intel.com>
Commit-ID: 5c9b0b1c49881c680d4a56b9d9e03dfb3160fd4d
Gitweb: https://git.kernel.org/tip/5c9b0b1c49881c680d4a56b9d9e03dfb3160fd4d
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
AuthorDate: Wed, 16 May 2018 11:01:28 +0300
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Wed, 16 May 2018 12:15:13 +0200
x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline()
Eric and Hugh have reported instant reboot due to my recent changes in
decompression code.
The root cause is that I didn't realize that we need to adjust GOT to be
able to run C code that early.
The problem is only visible with an older toolchain. Binutils >= 2.24 is
able to eliminate GOT references by replacing them with RIP-relative
address loads:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=80d873266dec
We need to adjust GOT two times:
- before calling paging_prepare() using the initial load address
- before calling C code from the relocated kernel
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 194a9749c73d ("x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G")
Link: http://lkml.kernel.org/r/20180516080131.27913-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/boot/compressed/head_64.S | 68 ++++++++++++++++++++++++++++++--------
1 file changed, 55 insertions(+), 13 deletions(-)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index fca012baba19..d17af6a4bfc9 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -305,6 +305,25 @@ ENTRY(startup_64)
/* Set up the stack */
leaq boot_stack_end(%rbx), %rsp
+ /*
+ * paging_prepare() and cleanup_trampoline() below can have GOT
+ * references. Adjust the table with address we are running at.
+ *
+ * Zero RAX for adjust_got: the GOT was not adjusted before;
+ * there's no adjustment to undo.
+ */
+ xorq %rax, %rax
+
+ /*
+ * Calculate the address the binary is loaded at and use it as
+ * a GOT adjustment.
+ */
+ call 1f
+1: popq %rdi
+ subq $1b, %rdi
+
+ call adjust_got
+
/*
* At this point we are in long mode with 4-level paging enabled,
* but we might want to enable 5-level paging or vice versa.
@@ -381,6 +400,21 @@ trampoline_return:
pushq $0
popfq
+ /*
+ * Previously we've adjusted the GOT with address the binary was
+ * loaded at. Now we need to re-adjust for relocation address.
+ *
+ * Calculate the address the binary is loaded at, so that we can
+ * undo the previous GOT adjustment.
+ */
+ call 1f
+1: popq %rax
+ subq $1b, %rax
+
+ /* The new adjustment is the relocation address */
+ movq %rbx, %rdi
+ call adjust_got
+
/*
* Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
@@ -481,19 +515,6 @@ relocated:
shrq $3, %rcx
rep stosq
-/*
- * Adjust our own GOT
- */
- leaq _got(%rip), %rdx
- leaq _egot(%rip), %rcx
-1:
- cmpq %rcx, %rdx
- jae 2f
- addq %rbx, (%rdx)
- addq $8, %rdx
- jmp 1b
-2:
-
/*
* Do the extraction, and jump to the new kernel..
*/
@@ -512,6 +533,27 @@ relocated:
*/
jmp *%rax
+/*
+ * Adjust the global offset table
+ *
+ * RAX is the previous adjustment of the table to undo (use 0 if it's the
+ * first time we touch GOT).
+ * RDI is the new adjustment to apply.
+ */
+adjust_got:
+ /* Walk through the GOT adding the address to the entries */
+ leaq _got(%rip), %rdx
+ leaq _egot(%rip), %rcx
+1:
+ cmpq %rcx, %rdx
+ jae 2f
+ subq %rax, (%rdx) /* Undo previous adjustment */
+ addq %rdi, (%rdx) /* Apply the new adjustment */
+ addq $8, %rdx
+ jmp 1b
+2:
+ ret
+
.code32
/*
* This is the 32-bit trampoline that will be copied over to low memory.
next prev parent reply other threads:[~2018-05-16 10:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-16 8:01 [PATCHv2 for v4.17 0/2] Fix two crashes in the decomression code Kirill A. Shutemov
2018-05-16 8:01 ` [PATCHv2 1/2] x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline() Kirill A. Shutemov
2018-05-16 9:52 ` Thomas Gleixner
2018-05-16 10:35 ` tip-bot for Kirill A. Shutemov [this message]
2018-05-16 8:01 ` [PATCHv2 2/2] x86/boot/compressed/64: Fix moving page table out of trampoline memory Kirill A. Shutemov
2018-05-16 9:53 ` Thomas Gleixner
2018-05-16 10:36 ` [tip:x86/urgent] " tip-bot for Kirill A. Shutemov
2018-05-16 8:01 ` [PATCH 3/4] x86/boot/compressed/64: Fix trampoline page table address calculation Kirill A. Shutemov
2018-05-16 8:06 ` Kirill A. Shutemov
2018-05-16 8:01 ` [PATCH 4/4] x86/mm: Introduce 'no5lvl' kernel parameter Kirill A. Shutemov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-5c9b0b1c49881c680d4a56b9d9e03dfb3160fd4d@git.kernel.org \
--to=tipbot@zytor.com \
--cc=eric.dumazet@gmail.com \
--cc=hpa@zytor.com \
--cc=hughd@google.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®