From: tip-bot for Tony Luck <tony.luck@intel.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
seto.hidetoshi@jp.fujitsu.com, tony.luck@intel.com,
gong.chen@linux.intel.com, bp@amd64.org, ying.huang@intel.com,
tglx@linutronix.de
Subject: [tip:x86/urgent] x86/mce: Add quirk for instruction recovery on Sandy Bridge processors
Date: Thu, 26 Jul 2012 08:19:02 -0700 [thread overview]
Message-ID: <tip-61b0fccd7f114573f973dfe25d864608822dc09e@git.kernel.org> (raw)
In-Reply-To: <180a06f3f357cf9f78259ae443a082b14a29535b.1343078495.git.tony.luck@intel.com>
Commit-ID: 61b0fccd7f114573f973dfe25d864608822dc09e
Gitweb: http://git.kernel.org/tip/61b0fccd7f114573f973dfe25d864608822dc09e
Author: Tony Luck <tony.luck@intel.com>
AuthorDate: Thu, 19 Jul 2012 11:28:46 -0700
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Thu, 26 Jul 2012 15:05:47 +0200
x86/mce: Add quirk for instruction recovery on Sandy Bridge processors
Sandy Bridge processors follow the SDM (Vol 3B, Table 15-20) and
set both the RIPV and EIPV bits in the MCG_STATUS register to
zero for machine checks during instruction fetch. This is more
than a little counter-intuitive and means that Linux cannot
recover from these errors. Rather than insert special case code
at several places in mce.c and mce-severity.c, we pretend the
EIPV bit was set for just this case early in processing the
machine check.
Acked-by: Borislav Petkov <bp@amd64.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/180a06f3f357cf9f78259ae443a082b14a29535b.1343078495.git.tony.luck@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/kernel/cpu/mcheck/mce.c | 43 +++++++++++++++++++++++++++++++++++--
1 files changed, 40 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 5a5a5dc..8cf60e2 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -105,6 +105,8 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
static DEFINE_PER_CPU(struct work_struct, mce_work);
+static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs);
+
/*
* CPU/chipset specific EDAC code can register a notifier call here to print
* MCE errors in a human-readable form.
@@ -652,14 +654,18 @@ EXPORT_SYMBOL_GPL(machine_check_poll);
* Do a quick check if any of the events requires a panic.
* This decides if we keep the events around or clear them.
*/
-static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp)
+static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp,
+ struct pt_regs *regs)
{
int i, ret = 0;
for (i = 0; i < banks; i++) {
m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
- if (m->status & MCI_STATUS_VAL)
+ if (m->status & MCI_STATUS_VAL) {
__set_bit(i, validp);
+ if (quirk_no_way_out)
+ quirk_no_way_out(i, m, regs);
+ }
if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
ret = 1;
}
@@ -1042,7 +1048,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
*final = m;
memset(valid_banks, 0, sizeof(valid_banks));
- no_way_out = mce_no_way_out(&m, &msg, valid_banks);
+ no_way_out = mce_no_way_out(&m, &msg, valid_banks, regs);
barrier();
@@ -1418,6 +1424,34 @@ static void __mcheck_cpu_init_generic(void)
}
}
+/*
+ * During IFU recovery Sandy Bridge -EP4S processors set the RIPV and
+ * EIPV bits in MCG_STATUS to zero on the affected logical processor (SDM
+ * Vol 3B Table 15-20). But this confuses both the code that determines
+ * whether the machine check occurred in kernel or user mode, and also
+ * the severity assessment code. Pretend that EIPV was set, and take the
+ * ip/cs values from the pt_regs that mce_gather_info() ignored earlier.
+ */
+static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs)
+{
+ if (bank != 0)
+ return;
+ if ((m->mcgstatus & (MCG_STATUS_EIPV|MCG_STATUS_RIPV)) != 0)
+ return;
+ if ((m->status & (MCI_STATUS_OVER|MCI_STATUS_UC|
+ MCI_STATUS_EN|MCI_STATUS_MISCV|MCI_STATUS_ADDRV|
+ MCI_STATUS_PCC|MCI_STATUS_S|MCI_STATUS_AR|
+ MCACOD)) !=
+ (MCI_STATUS_UC|MCI_STATUS_EN|
+ MCI_STATUS_MISCV|MCI_STATUS_ADDRV|MCI_STATUS_S|
+ MCI_STATUS_AR|MCACOD_INSTR))
+ return;
+
+ m->mcgstatus |= MCG_STATUS_EIPV;
+ m->ip = regs->ip;
+ m->cs = regs->cs;
+}
+
/* Add per CPU specific workarounds here */
static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
{
@@ -1515,6 +1549,9 @@ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
*/
if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0)
mce_bootlog = 0;
+
+ if (c->x86 == 6 && c->x86_model == 45)
+ quirk_no_way_out = quirk_sandybridge_ifu;
}
if (monarch_timeout < 0)
monarch_timeout = 0;
prev parent reply other threads:[~2012-07-26 15:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-23 21:21 [PATCH 0/2] Fix machine check recovery for instruction fault on Sandy Bridge Tony Luck
2012-07-19 18:21 ` [PATCH 1/2] x86/mce: Move MCACOD defines from mce-severity.c to <asm/mce.h> Tony Luck
2012-07-26 15:18 ` [tip:x86/urgent] x86/mce: Move MCACOD defines from mce-severity. c " tip-bot for Tony Luck
2012-07-19 18:28 ` [PATCH 2/2] x86/mce: Add quirk for instruction recovery on Sandy Bridge processors Tony Luck
2012-07-26 15:19 ` tip-bot for Tony Luck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-61b0fccd7f114573f973dfe25d864608822dc09e@git.kernel.org \
--to=tony.luck@intel.com \
--cc=bp@amd64.org \
--cc=gong.chen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=seto.hidetoshi@jp.fujitsu.com \
--cc=tglx@linutronix.de \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome