From: tip-bot for Andi Kleen <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: hpa@zytor.com, ak@linux.intel.com, peterz@infradead.org,
mingo@kernel.org, linux-kernel@vger.kernel.org,
torvalds@linux-foundation.org, tglx@linutronix.de
Subject: [tip:perf/core] perf/x86: Enable free running PEBS for REGS_USER/INTR
Date: Fri, 29 Sep 2017 13:07:30 -0700 [thread overview]
Message-ID: <tip-a47ba4d77e1236d214e5116b5631bc4c2d6e6369@git.kernel.org> (raw)
In-Reply-To: <20170831214630.21892-1-andi@firstfloor.org>
Commit-ID: a47ba4d77e1236d214e5116b5631bc4c2d6e6369
Gitweb: https://git.kernel.org/tip/a47ba4d77e1236d214e5116b5631bc4c2d6e6369
Author: Andi Kleen <ak@linux.intel.com>
AuthorDate: Thu, 31 Aug 2017 14:46:30 -0700
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Fri, 29 Sep 2017 13:28:31 +0200
perf/x86: Enable free running PEBS for REGS_USER/INTR
Currently free running PEBS is disabled when user or interrupt
registers are requested. Most of the registers are actually
available in the PEBS record and can be supported.
So we just need to check for the supported registers and then
allow it: it is all except for the segment register.
For user registers this only works when the counter is limited
to ring 3 only, so this also needs to be checked.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170831214630.21892-1-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/events/intel/core.c | 4 ++++
arch/x86/events/perf_event.h | 24 +++++++++++++++++++++++-
2 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index 829e89c..cfd91a0 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2958,6 +2958,10 @@ static unsigned long intel_pmu_free_running_flags(struct perf_event *event)
if (event->attr.use_clockid)
flags &= ~PERF_SAMPLE_TIME;
+ if (!event->attr.exclude_kernel)
+ flags &= ~PERF_SAMPLE_REGS_USER;
+ if (event->attr.sample_regs_user & ~PEBS_REGS)
+ flags &= ~(PERF_SAMPLE_REGS_USER | PERF_SAMPLE_REGS_INTR);
return flags;
}
diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h
index 4196f81..f7aaadf 100644
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -85,13 +85,15 @@ struct amd_nb {
* Flags PEBS can handle without an PMI.
*
* TID can only be handled by flushing at context switch.
+ * REGS_USER can be handled for events limited to ring 3.
*
*/
#define PEBS_FREERUNNING_FLAGS \
(PERF_SAMPLE_IP | PERF_SAMPLE_TID | PERF_SAMPLE_ADDR | \
PERF_SAMPLE_ID | PERF_SAMPLE_CPU | PERF_SAMPLE_STREAM_ID | \
PERF_SAMPLE_DATA_SRC | PERF_SAMPLE_IDENTIFIER | \
- PERF_SAMPLE_TRANSACTION | PERF_SAMPLE_PHYS_ADDR)
+ PERF_SAMPLE_TRANSACTION | PERF_SAMPLE_PHYS_ADDR | \
+ PERF_SAMPLE_REGS_INTR | PERF_SAMPLE_REGS_USER)
/*
* A debug store configuration.
@@ -110,6 +112,26 @@ struct debug_store {
u64 pebs_event_reset[MAX_PEBS_EVENTS];
};
+#define PEBS_REGS \
+ (PERF_REG_X86_AX | \
+ PERF_REG_X86_BX | \
+ PERF_REG_X86_CX | \
+ PERF_REG_X86_DX | \
+ PERF_REG_X86_DI | \
+ PERF_REG_X86_SI | \
+ PERF_REG_X86_SP | \
+ PERF_REG_X86_BP | \
+ PERF_REG_X86_IP | \
+ PERF_REG_X86_FLAGS | \
+ PERF_REG_X86_R8 | \
+ PERF_REG_X86_R9 | \
+ PERF_REG_X86_R10 | \
+ PERF_REG_X86_R11 | \
+ PERF_REG_X86_R12 | \
+ PERF_REG_X86_R13 | \
+ PERF_REG_X86_R14 | \
+ PERF_REG_X86_R15)
+
/*
* Per register state.
*/
prev parent reply other threads:[~2017-09-29 20:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-31 21:46 [PATCH] x86/perf: Enable free running pebs " Andi Kleen
2017-09-29 20:07 ` tip-bot for Andi Kleen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-a47ba4d77e1236d214e5116b5631bc4c2d6e6369@git.kernel.org \
--to=tipbot@zytor.com \
--cc=ak@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome