From: tip-bot for Fenghua Yu <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
penguin-kernel@I-love.SAKURA.ne.jp, fenghua.yu@intel.com,
tglx@linutronix.de
Subject: [tip:x86/urgent] x86-32, microcode_intel_early: Fix crash with CONFIG_DEBUG_VIRTUAL
Date: Tue, 19 Mar 2013 20:11:27 -0700 [thread overview]
Message-ID: <tip-c83a9d5e425d4678b05ca058fec6254f18601474@git.kernel.org> (raw)
In-Reply-To: <1363705484-27645-1-git-send-email-fenghua.yu@intel.com>
Commit-ID: c83a9d5e425d4678b05ca058fec6254f18601474
Gitweb: http://git.kernel.org/tip/c83a9d5e425d4678b05ca058fec6254f18601474
Author: Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Tue, 19 Mar 2013 08:04:44 -0700
Committer: H. Peter Anvin <hpa@zytor.com>
CommitDate: Tue, 19 Mar 2013 19:51:08 -0700
x86-32, microcode_intel_early: Fix crash with CONFIG_DEBUG_VIRTUAL
In 32-bit, __pa_symbol() in CONFIG_DEBUG_VIRTUAL accesses kernel data
(e.g. max_low_pfn) that not only hasn't been setup yet in such early
boot phase, but since we are in linear mode, cannot even be detected
as uninitialized.
Thus, use __pa_nodebug() rather than __pa_symbol() to get a global
symbol's physical address.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1363705484-27645-1-git-send-email-fenghua.yu@intel.com
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
arch/x86/kernel/microcode_intel_early.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/x86/kernel/microcode_intel_early.c b/arch/x86/kernel/microcode_intel_early.c
index 7890bc8..5992ee8 100644
--- a/arch/x86/kernel/microcode_intel_early.c
+++ b/arch/x86/kernel/microcode_intel_early.c
@@ -90,13 +90,13 @@ microcode_phys(struct microcode_intel **mc_saved_tmp,
struct microcode_intel ***mc_saved;
mc_saved = (struct microcode_intel ***)
- __pa_symbol(&mc_saved_data->mc_saved);
+ __pa_nodebug(&mc_saved_data->mc_saved);
for (i = 0; i < mc_saved_data->mc_saved_count; i++) {
struct microcode_intel *p;
p = *(struct microcode_intel **)
- __pa(mc_saved_data->mc_saved + i);
- mc_saved_tmp[i] = (struct microcode_intel *)__pa(p);
+ __pa_nodebug(mc_saved_data->mc_saved + i);
+ mc_saved_tmp[i] = (struct microcode_intel *)__pa_nodebug(p);
}
}
#endif
@@ -562,7 +562,7 @@ scan_microcode(unsigned long start, unsigned long end,
struct cpio_data cd;
long offset = 0;
#ifdef CONFIG_X86_32
- char *p = (char *)__pa_symbol(ucode_name);
+ char *p = (char *)__pa_nodebug(ucode_name);
#else
char *p = ucode_name;
#endif
@@ -630,8 +630,8 @@ static void __cpuinit print_ucode(struct ucode_cpu_info *uci)
if (mc_intel == NULL)
return;
- delay_ucode_info_p = (int *)__pa_symbol(&delay_ucode_info);
- current_mc_date_p = (int *)__pa_symbol(¤t_mc_date);
+ delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info);
+ current_mc_date_p = (int *)__pa_nodebug(¤t_mc_date);
*delay_ucode_info_p = 1;
*current_mc_date_p = mc_intel->hdr.date;
@@ -741,15 +741,15 @@ load_ucode_intel_bsp(void)
#ifdef CONFIG_X86_32
struct boot_params *boot_params_p;
- boot_params_p = (struct boot_params *)__pa_symbol(&boot_params);
+ boot_params_p = (struct boot_params *)__pa_nodebug(&boot_params);
ramdisk_image = boot_params_p->hdr.ramdisk_image;
ramdisk_size = boot_params_p->hdr.ramdisk_size;
initrd_start_early = ramdisk_image;
initrd_end_early = initrd_start_early + ramdisk_size;
_load_ucode_intel_bsp(
- (struct mc_saved_data *)__pa_symbol(&mc_saved_data),
- (unsigned long *)__pa_symbol(&mc_saved_in_initrd),
+ (struct mc_saved_data *)__pa_nodebug(&mc_saved_data),
+ (unsigned long *)__pa_nodebug(&mc_saved_in_initrd),
initrd_start_early, initrd_end_early, &uci);
#else
ramdisk_image = boot_params.hdr.ramdisk_image;
@@ -772,10 +772,10 @@ void __cpuinit load_ucode_intel_ap(void)
unsigned long *initrd_start_p;
mc_saved_in_initrd_p =
- (unsigned long *)__pa_symbol(mc_saved_in_initrd);
- mc_saved_data_p = (struct mc_saved_data *)__pa_symbol(&mc_saved_data);
- initrd_start_p = (unsigned long *)__pa_symbol(&initrd_start);
- initrd_start_addr = (unsigned long)__pa_symbol(*initrd_start_p);
+ (unsigned long *)__pa_nodebug(mc_saved_in_initrd);
+ mc_saved_data_p = (struct mc_saved_data *)__pa_nodebug(&mc_saved_data);
+ initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
+ initrd_start_addr = (unsigned long)__pa_nodebug(*initrd_start_p);
#else
mc_saved_data_p = &mc_saved_data;
mc_saved_in_initrd_p = mc_saved_in_initrd;
next prev parent reply other threads:[~2013-03-20 3:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-19 15:04 [PATCH] x86/microcode_intel_early.c: Get 32-bit physical address by __pa_nodebug() Fenghua Yu
2013-03-19 23:15 ` Yinghai Lu
2013-03-19 23:21 ` H. Peter Anvin
2013-03-19 23:36 ` Yu, Fenghua
2013-03-19 23:48 ` Yinghai Lu
2013-03-20 0:03 ` H. Peter Anvin
2013-03-20 2:06 ` Tetsuo Handa
2013-03-20 3:11 ` tip-bot for Fenghua Yu [this message]
2013-03-21 10:40 ` Ingo Molnar
2013-03-21 14:30 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-c83a9d5e425d4678b05ca058fec6254f18601474@git.kernel.org \
--to=tipbot@zytor.com \
--cc=fenghua.yu@intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=penguin-kernel@I-love.SAKURA.ne.jp \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome