From: tip-bot for Jan Beulich <JBeulich@suse.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@redhat.com,
eric.dumazet@gmail.com, luca@luca-barbieri.com,
jbeulich@suse.com, JBeulich@suse.com, tglx@linutronix.de,
hpa@linux.intel.com
Subject: [tip:x86/atomic] x86: atomic64 assembly improvements
Date: Sat, 21 Jan 2012 20:00:00 -0800 [thread overview]
Message-ID: <tip-cb8095bba6d24118135a5683a956f4f4fb5f17bb@git.kernel.org> (raw)
In-Reply-To: <4F19A2BC020000780006E0DC@nat28.tlf.novell.com>
Commit-ID: cb8095bba6d24118135a5683a956f4f4fb5f17bb
Gitweb: http://git.kernel.org/tip/cb8095bba6d24118135a5683a956f4f4fb5f17bb
Author: Jan Beulich <JBeulich@suse.com>
AuthorDate: Fri, 20 Jan 2012 16:22:04 +0000
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Fri, 20 Jan 2012 17:29:49 -0800
x86: atomic64 assembly improvements
In the "xchg" implementation, %ebx and %ecx don't need to be copied
into %eax and %edx respectively (this is only necessary when desiring
to only read the stored value).
In the "add_unless" implementation, swapping the use of %ecx and %esi
for passing arguments allows %esi to become an input only (i.e.
permitting the register to be re-used to address the same object
without reload).
In "{add,sub}_return", doing the initial read64 through the passed in
%ecx decreases a register dependency.
In "inc_not_zero", a branch can be eliminated by or-ing together the
two halves of the current (64-bit) value, and code size can be further
reduced by adjusting the arithmetic slightly.
v2: Undo the folding of "xchg" and "set".
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/4F19A2BC020000780006E0DC@nat28.tlf.novell.com
Cc: Luca Barbieri <luca@luca-barbieri.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
arch/x86/include/asm/atomic64_32.h | 5 ++---
arch/x86/lib/atomic64_386_32.S | 6 +++---
arch/x86/lib/atomic64_cx8_32.S | 29 +++++++++++------------------
3 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/arch/x86/include/asm/atomic64_32.h b/arch/x86/include/asm/atomic64_32.h
index 908303f..1981199 100644
--- a/arch/x86/include/asm/atomic64_32.h
+++ b/arch/x86/include/asm/atomic64_32.h
@@ -288,9 +288,8 @@ static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
unsigned low = (unsigned)u;
unsigned high = (unsigned)(u >> 32);
alternative_atomic64(add_unless,
- ASM_OUTPUT2("+A" (a), "+c" (v),
- "+S" (low), "+D" (high)),
- ASM_NO_INPUT_CLOBBER("memory"));
+ ASM_OUTPUT2("+A" (a), "+c" (low), "+D" (high)),
+ "S" (v) : "memory");
return (int)a;
}
diff --git a/arch/x86/lib/atomic64_386_32.S b/arch/x86/lib/atomic64_386_32.S
index e8e7e0d..00933d5 100644
--- a/arch/x86/lib/atomic64_386_32.S
+++ b/arch/x86/lib/atomic64_386_32.S
@@ -137,13 +137,13 @@ BEGIN(dec_return)
RET_ENDP
#undef v
-#define v %ecx
+#define v %esi
BEGIN(add_unless)
- addl %eax, %esi
+ addl %eax, %ecx
adcl %edx, %edi
addl (v), %eax
adcl 4(v), %edx
- cmpl %eax, %esi
+ cmpl %eax, %ecx
je 3f
1:
movl %eax, (v)
diff --git a/arch/x86/lib/atomic64_cx8_32.S b/arch/x86/lib/atomic64_cx8_32.S
index 391a083..f5cc9eb 100644
--- a/arch/x86/lib/atomic64_cx8_32.S
+++ b/arch/x86/lib/atomic64_cx8_32.S
@@ -55,8 +55,6 @@ ENDPROC(atomic64_set_cx8)
ENTRY(atomic64_xchg_cx8)
CFI_STARTPROC
- movl %ebx, %eax
- movl %ecx, %edx
1:
LOCK_PREFIX
cmpxchg8b (%esi)
@@ -78,7 +76,7 @@ ENTRY(atomic64_\func\()_return_cx8)
movl %edx, %edi
movl %ecx, %ebp
- read64 %ebp
+ read64 %ecx
1:
movl %eax, %ebx
movl %edx, %ecx
@@ -159,23 +157,22 @@ ENTRY(atomic64_add_unless_cx8)
SAVE ebx
/* these just push these two parameters on the stack */
SAVE edi
- SAVE esi
+ SAVE ecx
- movl %ecx, %ebp
- movl %eax, %esi
+ movl %eax, %ebp
movl %edx, %edi
- read64 %ebp
+ read64 %esi
1:
cmpl %eax, 0(%esp)
je 4f
2:
movl %eax, %ebx
movl %edx, %ecx
- addl %esi, %ebx
+ addl %ebp, %ebx
adcl %edi, %ecx
LOCK_PREFIX
- cmpxchg8b (%ebp)
+ cmpxchg8b (%esi)
jne 1b
movl $1, %eax
@@ -199,13 +196,13 @@ ENTRY(atomic64_inc_not_zero_cx8)
read64 %esi
1:
- testl %eax, %eax
- je 4f
-2:
+ movl %eax, %ecx
+ orl %edx, %ecx
+ jz 3f
movl %eax, %ebx
- movl %edx, %ecx
+ xorl %ecx, %ecx
addl $1, %ebx
- adcl $0, %ecx
+ adcl %edx, %ecx
LOCK_PREFIX
cmpxchg8b (%esi)
jne 1b
@@ -214,9 +211,5 @@ ENTRY(atomic64_inc_not_zero_cx8)
3:
RESTORE ebx
ret
-4:
- testl %edx, %edx
- jne 2b
- jmp 3b
CFI_ENDPROC
ENDPROC(atomic64_inc_not_zero_cx8)
prev parent reply other threads:[~2012-01-22 4:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-20 16:22 [PATCH v2 2/2] ix86: " Jan Beulich
2012-01-22 4:00 ` tip-bot for Jan Beulich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-cb8095bba6d24118135a5683a956f4f4fb5f17bb@git.kernel.org \
--to=jbeulich@suse.com \
--cc=eric.dumazet@gmail.com \
--cc=hpa@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=luca@luca-barbieri.com \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome