From: tip-bot for Yazen Ghannam <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, tglx@linutronix.de,
Yazen.Ghannam@amd.com, bp@suse.de, mingo@kernel.org,
hpa@zytor.com
Subject: [tip:ras/core] x86/mce/AMD: Read MSRs on the CPU allocating the threshold blocks
Date: Tue, 13 Sep 2016 06:29:47 -0700 [thread overview]
Message-ID: <tip-cfee4f6f0b2026380c6bc6913dbd27943df17371@git.kernel.org> (raw)
In-Reply-To: <1472673994-12235-2-git-send-email-Yazen.Ghannam@amd.com>
Commit-ID: cfee4f6f0b2026380c6bc6913dbd27943df17371
Gitweb: http://git.kernel.org/tip/cfee4f6f0b2026380c6bc6913dbd27943df17371
Author: Yazen Ghannam <Yazen.Ghannam@amd.com>
AuthorDate: Mon, 12 Sep 2016 09:59:31 +0200
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 13 Sep 2016 15:23:08 +0200
x86/mce/AMD: Read MSRs on the CPU allocating the threshold blocks
Scalable MCA systems allow non-core MCA banks to only be accessible by
certain CPUs. The MSRs for these banks are Read-as-Zero on other CPUs.
During allocate_threshold_blocks(), get_block_address() can be scheduled
on CPUs other than the one allocating the block. This causes the MSRs to
be read on the wrong CPU and results in incorrect behavior.
Add a @cpu parameter to get_block_address() and pass this in to ensure
that the MSRs are only read on the CPU that is allocating the block.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472673994-12235-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/mcheck/mce_amd.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 419e0ee..9da92fb 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -293,7 +293,7 @@ static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c)
wrmsr(MSR_CU_DEF_ERR, low, high);
}
-static u32 get_block_address(u32 current_addr, u32 low, u32 high,
+static u32 get_block_address(unsigned int cpu, u32 current_addr, u32 low, u32 high,
unsigned int bank, unsigned int block)
{
u32 addr = 0, offset = 0;
@@ -309,13 +309,13 @@ static u32 get_block_address(u32 current_addr, u32 low, u32 high,
*/
u32 low, high;
- if (rdmsr_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
+ if (rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
return addr;
if (!(low & MCI_CONFIG_MCAX))
return addr;
- if (!rdmsr_safe(MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high) &&
+ if (!rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high) &&
(low & MASK_BLKPTR_LO))
addr = MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
}
@@ -421,12 +421,12 @@ out:
void mce_amd_feature_init(struct cpuinfo_x86 *c)
{
u32 low = 0, high = 0, address = 0;
- unsigned int bank, block;
+ unsigned int bank, block, cpu = smp_processor_id();
int offset = -1;
for (bank = 0; bank < mca_cfg.banks; ++bank) {
for (block = 0; block < NR_BLOCKS; ++block) {
- address = get_block_address(address, low, high, bank, block);
+ address = get_block_address(cpu, address, low, high, bank, block);
if (!address)
break;
@@ -544,15 +544,14 @@ static void amd_deferred_error_interrupt(void)
static void amd_threshold_interrupt(void)
{
u32 low = 0, high = 0, address = 0;
- int cpu = smp_processor_id();
- unsigned int bank, block;
+ unsigned int bank, block, cpu = smp_processor_id();
/* assume first bank caused it */
for (bank = 0; bank < mca_cfg.banks; ++bank) {
if (!(per_cpu(bank_map, cpu) & (1 << bank)))
continue;
for (block = 0; block < NR_BLOCKS; ++block) {
- address = get_block_address(address, low, high, bank, block);
+ address = get_block_address(cpu, address, low, high, bank, block);
if (!address)
break;
@@ -774,7 +773,7 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
if (err)
goto out_free;
recurse:
- address = get_block_address(address, low, high, bank, ++block);
+ address = get_block_address(cpu, address, low, high, bank, ++block);
if (!address)
return 0;
parent reply other threads:[~2016-09-13 13:30 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <1472673994-12235-2-git-send-email-Yazen.Ghannam@amd.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-cfee4f6f0b2026380c6bc6913dbd27943df17371@git.kernel.org \
--to=tipbot@zytor.com \
--cc=Yazen.Ghannam@amd.com \
--cc=bp@suse.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®