From: tip-bot for Dave Hansen <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
dave@sr71.net, riel@redhat.com, mgorman@suse.de,
tglx@linutronix.de, dave.hansen@linux.intel.com,
hpa@linux.intel.com
Subject: [tip:x86/mm] x86/mm: Add tracepoints for TLB flushes
Date: Thu, 31 Jul 2014 09:10:37 -0700 [thread overview]
Message-ID: <tip-d17d8f9dedb9dd76fd540a5c497101529d9eb25a@git.kernel.org> (raw)
In-Reply-To: <20140731154059.4C96CBA5@viggo.jf.intel.com>
Commit-ID: d17d8f9dedb9dd76fd540a5c497101529d9eb25a
Gitweb: http://git.kernel.org/tip/d17d8f9dedb9dd76fd540a5c497101529d9eb25a
Author: Dave Hansen <dave@sr71.net>
AuthorDate: Thu, 31 Jul 2014 08:40:59 -0700
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jul 2014 08:48:51 -0700
x86/mm: Add tracepoints for TLB flushes
We don't have any good way to figure out what kinds of flushes
are being attempted. Right now, we can try to use the vm
counters, but those only tell us what we actually did with the
hardware (one-by-one vs full) and don't tell us what was actually
_requested_.
This allows us to select out "interesting" TLB flushes that we
might want to optimize (like the ranged ones) and ignore the ones
that we have very little control over (the ones at context
switch).
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154059.4C96CBA5@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
arch/x86/include/asm/mmu_context.h | 6 ++++++
arch/x86/mm/init.c | 7 +++++++
arch/x86/mm/tlb.c | 11 +++++++++--
include/linux/mm_types.h | 8 ++++++++
include/trace/events/tlb.h | 40 ++++++++++++++++++++++++++++++++++++++
5 files changed, 70 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index be12c53..166af2a 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -3,6 +3,10 @@
#include <asm/desc.h>
#include <linux/atomic.h>
+#include <linux/mm_types.h>
+
+#include <trace/events/tlb.h>
+
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/paravirt.h>
@@ -44,6 +48,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
/* Re-load page tables */
load_cr3(next->pgd);
+ trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
/* Stop flush ipis for the previous mm */
cpumask_clear_cpu(cpu, mm_cpumask(prev));
@@ -71,6 +76,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
* to make sure to use no freed page tables.
*/
load_cr3(next->pgd);
+ trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
load_LDT_nolock(&next->context);
}
}
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index f971306..66dba36 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -18,6 +18,13 @@
#include <asm/dma.h> /* for MAX_DMA_PFN */
#include <asm/microcode.h>
+/*
+ * We need to define the tracepoints somewhere, and tlb.c
+ * is only compied when SMP=y.
+ */
+#define CREATE_TRACE_POINTS
+#include <trace/events/tlb.h>
+
#include "mm_internal.h"
static unsigned long __initdata pgt_buf_start;
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index add5a0f..6f00ecb 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -49,6 +49,7 @@ void leave_mm(int cpu)
if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) {
cpumask_clear_cpu(cpu, mm_cpumask(active_mm));
load_cr3(swapper_pg_dir);
+ trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
}
}
EXPORT_SYMBOL_GPL(leave_mm);
@@ -107,15 +108,19 @@ static void flush_tlb_func(void *info)
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
- if (f->flush_end == TLB_FLUSH_ALL)
+ if (f->flush_end == TLB_FLUSH_ALL) {
local_flush_tlb();
- else {
+ trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, TLB_FLUSH_ALL);
+ } else {
unsigned long addr;
+ unsigned long nr_pages =
+ f->flush_end - f->flush_start / PAGE_SIZE;
addr = f->flush_start;
while (addr < f->flush_end) {
__flush_tlb_single(addr);
addr += PAGE_SIZE;
}
+ trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, nr_pages);
}
} else
leave_mm(smp_processor_id());
@@ -153,6 +158,7 @@ void flush_tlb_current_task(void)
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
+ trace_tlb_flush(TLB_LOCAL_SHOOTDOWN, TLB_FLUSH_ALL);
if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
preempt_enable();
@@ -191,6 +197,7 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
__flush_tlb_single(addr);
}
}
+ trace_tlb_flush(TLB_LOCAL_MM_SHOOTDOWN, base_pages_to_flush);
out:
if (base_pages_to_flush == TLB_FLUSH_ALL) {
start = 0UL;
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 96c5750..796deac 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -516,4 +516,12 @@ struct vm_special_mapping
struct page **pages;
};
+enum tlb_flush_reason {
+ TLB_FLUSH_ON_TASK_SWITCH,
+ TLB_REMOTE_SHOOTDOWN,
+ TLB_LOCAL_SHOOTDOWN,
+ TLB_LOCAL_MM_SHOOTDOWN,
+ NR_TLB_FLUSH_REASONS,
+};
+
#endif /* _LINUX_MM_TYPES_H */
diff --git a/include/trace/events/tlb.h b/include/trace/events/tlb.h
new file mode 100644
index 0000000..13391d2
--- /dev/null
+++ b/include/trace/events/tlb.h
@@ -0,0 +1,40 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM tlb
+
+#if !defined(_TRACE_TLB_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_TLB_H
+
+#include <linux/mm_types.h>
+#include <linux/tracepoint.h>
+
+#define TLB_FLUSH_REASON \
+ { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, \
+ { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, \
+ { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, \
+ { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }
+
+TRACE_EVENT(tlb_flush,
+
+ TP_PROTO(int reason, unsigned long pages),
+ TP_ARGS(reason, pages),
+
+ TP_STRUCT__entry(
+ __field( int, reason)
+ __field(unsigned long, pages)
+ ),
+
+ TP_fast_assign(
+ __entry->reason = reason;
+ __entry->pages = pages;
+ ),
+
+ TP_printk("pages:%ld reason:%s (%d)",
+ __entry->pages,
+ __print_symbolic(__entry->reason, TLB_FLUSH_REASON),
+ __entry->reason)
+);
+
+#endif /* _TRACE_TLB_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
next prev parent reply other threads:[~2014-07-31 16:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-31 15:40 [PATCH 0/7] [RESEND][v4] x86: rework tlb range flushing code Dave Hansen
2014-07-31 15:40 ` [PATCH 1/7] x86: mm: clean up tlb " Dave Hansen
2014-07-31 16:09 ` [tip:x86/mm] x86/mm: Clean up the TLB " tip-bot for Dave Hansen
2014-07-31 15:40 ` [PATCH 2/7] x86: mm: rip out complicated, out-of-date, buggy TLB flushing Dave Hansen
2014-07-31 16:09 ` [tip:x86/mm] x86/mm: Rip " tip-bot for Dave Hansen
2014-07-31 15:40 ` [PATCH 3/7] x86: mm: fix missed global TLB flush stat Dave Hansen
2014-07-31 16:10 ` [tip:x86/mm] x86/mm: Fix " tip-bot for Dave Hansen
2014-07-31 15:40 ` [PATCH 4/7] x86: mm: unify remote invlpg code Dave Hansen
2014-07-31 16:10 ` [tip:x86/mm] x86/mm: Unify remote INVLPG code tip-bot for Dave Hansen
2014-07-31 15:40 ` [PATCH 5/7] x86: mm: add tracepoints for TLB flushes Dave Hansen
2014-07-31 16:10 ` tip-bot for Dave Hansen [this message]
2014-07-31 15:41 ` [PATCH 6/7] x86: mm: new tunable for single vs full TLB flush Dave Hansen
2014-07-31 16:10 ` [tip:x86/mm] x86/mm: New " tip-bot for Dave Hansen
2014-07-31 15:41 ` [PATCH 7/7] x86: mm: set TLB flush tunable to sane value (33) Dave Hansen
2014-07-31 16:11 ` [tip:x86/mm] x86/mm: Set " tip-bot for Dave Hansen
2014-07-31 16:58 ` [PATCH 0/7] [RESEND][v4] x86: rework tlb range flushing code H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-d17d8f9dedb9dd76fd540a5c497101529d9eb25a@git.kernel.org \
--to=tipbot@zytor.com \
--cc=dave.hansen@linux.intel.com \
--cc=dave@sr71.net \
--cc=hpa@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mgorman@suse.de \
--cc=mingo@kernel.org \
--cc=riel@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome