From: "tip-bot for Márton Németh" <nm127@freemail.hu>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
yinghai@kernel.org, nagananda.chumbalkar@hp.com,
suresh.b.siddha@intel.com, tglx@linutronix.de, nm127@freemail.hu
Subject: [tip:x86/apic] x86/apic: Only compile local function if used with !CONFIG_GENERIC_PENDING_IRQ
Date: Tue, 8 May 2012 03:04:12 -0700 [thread overview]
Message-ID: <tip-d1ecad6eee8629c6b425580aad76cf99b85956e9@git.kernel.org> (raw)
In-Reply-To: <1336461860.2296.3.camel@sbsiddha-mobl2>
Commit-ID: d1ecad6eee8629c6b425580aad76cf99b85956e9
Gitweb: http://git.kernel.org/tip/d1ecad6eee8629c6b425580aad76cf99b85956e9
Author: Márton Németh <nm127@freemail.hu>
AuthorDate: Tue, 8 May 2012 00:24:20 -0700
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Tue, 8 May 2012 11:23:15 +0200
x86/apic: Only compile local function if used with !CONFIG_GENERIC_PENDING_IRQ
The local function io_apic_level_ack_pending() is only called
from io_apic_level_ack_pending(). The later function is only
compiled if CONFIG_GENERIC_PENDING_IRQ is defined. Move the
io_apic_level_ack_pending() to the existing #ifdef
CONFIG_GENERIC_PENDING_IRQ code block.
This will remove the following warning message during compiling
without CONFIG_GENERIC_PENDING_IRQ defined:
* arch/x86/kernel/apic/io_apic.c:382: warning: ‘io_apic_level_ack_pending’ defined but not used
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Link: http://lkml.kernel.org/r/1336461860.2296.3.camel@sbsiddha-mobl2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/kernel/apic/io_apic.c | 46 ++++++++++++++++++++--------------------
1 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 973539c..e245365 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -346,29 +346,6 @@ void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int val
writel(value, &io_apic->data);
}
-static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
-{
- struct irq_pin_list *entry;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&ioapic_lock, flags);
- for_each_irq_pin(entry, cfg->irq_2_pin) {
- unsigned int reg;
- int pin;
-
- pin = entry->pin;
- reg = io_apic_read(entry->apic, 0x10 + pin*2);
- /* Is the remote IRR bit set? */
- if (reg & IO_APIC_REDIR_REMOTE_IRR) {
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
- return true;
- }
- }
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
-
- return false;
-}
-
union entry_union {
struct { u32 w1, w2; };
struct IO_APIC_route_entry entry;
@@ -2519,6 +2496,29 @@ static void ack_apic_edge(struct irq_data *data)
atomic_t irq_mis_count;
#ifdef CONFIG_GENERIC_PENDING_IRQ
+static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
+{
+ struct irq_pin_list *entry;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&ioapic_lock, flags);
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
+ unsigned int reg;
+ int pin;
+
+ pin = entry->pin;
+ reg = io_apic_read(entry->apic, 0x10 + pin*2);
+ /* Is the remote IRR bit set? */
+ if (reg & IO_APIC_REDIR_REMOTE_IRR) {
+ raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+ return true;
+ }
+ }
+ raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return false;
+}
+
static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg)
{
/* If we are moving the irq we need to mask it */
prev parent reply other threads:[~2012-05-08 10:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-14 22:43 [PATCH] x86 apic: only compile local function if used Németh Márton
2012-05-07 13:12 ` Ingo Molnar
2012-05-08 7:24 ` Suresh Siddha
2012-05-08 10:04 ` tip-bot for Márton Németh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-d1ecad6eee8629c6b425580aad76cf99b85956e9@git.kernel.org \
--to=nm127@freemail.hu \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=nagananda.chumbalkar@hp.com \
--cc=suresh.b.siddha@intel.com \
--cc=tglx@linutronix.de \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome