From: tip-bot for Paolo Bonzini <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, feng.wu@intel.com,
fengguang.wu@intel.com, mingo@kernel.org, tglx@linutronix.de,
pbonzini@redhat.com
Subject: [tip:x86/apic] x86/x2apic: Make stub functions available even if !CONFIG_X86_LOCAL_APIC
Date: Wed, 30 Sep 2015 12:24:36 -0700 [thread overview]
Message-ID: <tip-e02ae3871355194a61b03a07d96fd71e81d7eff9@git.kernel.org> (raw)
In-Reply-To: <1443435991-35750-1-git-send-email-pbonzini@redhat.com>
Commit-ID: e02ae3871355194a61b03a07d96fd71e81d7eff9
Gitweb: http://git.kernel.org/tip/e02ae3871355194a61b03a07d96fd71e81d7eff9
Author: Paolo Bonzini <pbonzini@redhat.com>
AuthorDate: Mon, 28 Sep 2015 12:26:31 +0200
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 30 Sep 2015 21:17:36 +0200
x86/x2apic: Make stub functions available even if !CONFIG_X86_LOCAL_APIC
Some CONFIG_X86_X2APIC functions, especially x2apic_enabled(), are not
declared if !CONFIG_X86_LOCAL_APIC. However, the same stubs that work
for !CONFIG_X86_X2APIC are okay even if there is no local APIC support
at all.
Avoid the introduction of #ifdefs by moving the x2apic declarations
completely outside the CONFIG_X86_LOCAL_APIC block. (Unfortunately,
diff generation messes up the actual change that this patch makes).
There is no semantic change because CONFIG_X86_X2APIC depends on
CONFIG_X86_LOCAL_APIC.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Wu <feng.wu@intel.com>
Link: http://lkml.kernel.org/r/1443435991-35750-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/apic.h | 110 ++++++++++++++++++++++----------------------
1 file changed, 55 insertions(+), 55 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index ebf6d5e..a30316b 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -115,6 +115,59 @@ static inline bool apic_is_x2apic_enabled(void)
return msr & X2APIC_ENABLE;
}
+extern void enable_IR_x2apic(void);
+
+extern int get_physical_broadcast(void);
+
+extern int lapic_get_maxlvt(void);
+extern void clear_local_APIC(void);
+extern void disconnect_bsp_APIC(int virt_wire_setup);
+extern void disable_local_APIC(void);
+extern void lapic_shutdown(void);
+extern void sync_Arb_IDs(void);
+extern void init_bsp_APIC(void);
+extern void setup_local_APIC(void);
+extern void init_apic_mappings(void);
+void register_lapic_address(unsigned long address);
+extern void setup_boot_APIC_clock(void);
+extern void setup_secondary_APIC_clock(void);
+extern int APIC_init_uniprocessor(void);
+
+#ifdef CONFIG_X86_64
+static inline int apic_force_enable(unsigned long addr)
+{
+ return -1;
+}
+#else
+extern int apic_force_enable(unsigned long addr);
+#endif
+
+extern int apic_bsp_setup(bool upmode);
+extern void apic_ap_setup(void);
+
+/*
+ * On 32bit this is mach-xxx local
+ */
+#ifdef CONFIG_X86_64
+extern int apic_is_clustered_box(void);
+#else
+static inline int apic_is_clustered_box(void)
+{
+ return 0;
+}
+#endif
+
+extern int setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask);
+
+#else /* !CONFIG_X86_LOCAL_APIC */
+static inline void lapic_shutdown(void) { }
+#define local_apic_timer_c2_ok 1
+static inline void init_apic_mappings(void) { }
+static inline void disable_local_APIC(void) { }
+# define setup_boot_APIC_clock x86_init_noop
+# define setup_secondary_APIC_clock x86_init_noop
+#endif /* !CONFIG_X86_LOCAL_APIC */
+
#ifdef CONFIG_X86_X2APIC
/*
* Make previous memory operations globally visible before
@@ -186,67 +239,14 @@ static inline int x2apic_enabled(void)
}
#define x2apic_supported() (cpu_has_x2apic)
-#else
+#else /* !CONFIG_X86_X2APIC */
static inline void check_x2apic(void) { }
static inline void x2apic_setup(void) { }
static inline int x2apic_enabled(void) { return 0; }
#define x2apic_mode (0)
#define x2apic_supported() (0)
-#endif
-
-extern void enable_IR_x2apic(void);
-
-extern int get_physical_broadcast(void);
-
-extern int lapic_get_maxlvt(void);
-extern void clear_local_APIC(void);
-extern void disconnect_bsp_APIC(int virt_wire_setup);
-extern void disable_local_APIC(void);
-extern void lapic_shutdown(void);
-extern void sync_Arb_IDs(void);
-extern void init_bsp_APIC(void);
-extern void setup_local_APIC(void);
-extern void init_apic_mappings(void);
-void register_lapic_address(unsigned long address);
-extern void setup_boot_APIC_clock(void);
-extern void setup_secondary_APIC_clock(void);
-extern int APIC_init_uniprocessor(void);
-
-#ifdef CONFIG_X86_64
-static inline int apic_force_enable(unsigned long addr)
-{
- return -1;
-}
-#else
-extern int apic_force_enable(unsigned long addr);
-#endif
-
-extern int apic_bsp_setup(bool upmode);
-extern void apic_ap_setup(void);
-
-/*
- * On 32bit this is mach-xxx local
- */
-#ifdef CONFIG_X86_64
-extern int apic_is_clustered_box(void);
-#else
-static inline int apic_is_clustered_box(void)
-{
- return 0;
-}
-#endif
-
-extern int setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask);
-
-#else /* !CONFIG_X86_LOCAL_APIC */
-static inline void lapic_shutdown(void) { }
-#define local_apic_timer_c2_ok 1
-static inline void init_apic_mappings(void) { }
-static inline void disable_local_APIC(void) { }
-# define setup_boot_APIC_clock x86_init_noop
-# define setup_secondary_APIC_clock x86_init_noop
-#endif /* !CONFIG_X86_LOCAL_APIC */
+#endif /* !CONFIG_X86_X2APIC */
#ifdef CONFIG_X86_64
#define SET_APIC_ID(x) (apic->set_apic_id(x))
next prev parent reply other threads:[~2015-09-30 19:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-28 10:26 [PATCH] x86: x2apic: make " Paolo Bonzini
2015-09-30 19:24 ` tip-bot for Paolo Bonzini [this message]
2015-09-30 19:26 ` [tip:x86/apic] x86/x2apic: Make " Thomas Gleixner
2015-10-01 8:27 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-e02ae3871355194a61b03a07d96fd71e81d7eff9@git.kernel.org \
--to=tipbot@zytor.com \
--cc=feng.wu@intel.com \
--cc=fengguang.wu@intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=pbonzini@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome