From: tip-bot for Andy Lutomirski <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: fweisbec@gmail.com, luto@kernel.org, tglx@linutronix.de,
hpa@zytor.com, luto@amacapital.net, bp@alien8.de,
torvalds@linux-foundation.org, dvlasenk@redhat.com,
mingo@kernel.org, linux-kernel@vger.kernel.org,
brgerst@gmail.com, peterz@infradead.org
Subject: [tip:x86/asm] selftests/x86: Add check_initial_reg_state()
Date: Fri, 29 Jan 2016 03:34:02 -0800 [thread overview]
Message-ID: <tip-e21d50f3864e2a8995f5d2a41dea3f0fa07758b4@git.kernel.org> (raw)
In-Reply-To: <ef54f8d066b30a3eb36bbf26300eebb242185700.1454022279.git.luto@kernel.org>
Commit-ID: e21d50f3864e2a8995f5d2a41dea3f0fa07758b4
Gitweb: http://git.kernel.org/tip/e21d50f3864e2a8995f5d2a41dea3f0fa07758b4
Author: Andy Lutomirski <luto@kernel.org>
AuthorDate: Thu, 28 Jan 2016 15:11:20 -0800
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Fri, 29 Jan 2016 09:46:37 +0100
selftests/x86: Add check_initial_reg_state()
This checks that ELF binaries are started with an appropriately
blank register state.
( There's currently a nasty special case in the entry asm to
arrange for this. I'm planning on removing the special case,
and this will help make sure I don't break it. )
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ef54f8d066b30a3eb36bbf26300eebb242185700.1454022279.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
tools/testing/selftests/x86/Makefile | 9 +-
.../selftests/x86/check_initial_reg_state.c | 109 +++++++++++++++++++++
2 files changed, 117 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile
index 9c81f26..df4f767 100644
--- a/tools/testing/selftests/x86/Makefile
+++ b/tools/testing/selftests/x86/Makefile
@@ -4,7 +4,8 @@ include ../lib.mk
.PHONY: all all_32 all_64 warn_32bit_failure clean
-TARGETS_C_BOTHBITS := single_step_syscall sysret_ss_attrs syscall_nt ptrace_syscall
+TARGETS_C_BOTHBITS := single_step_syscall sysret_ss_attrs syscall_nt ptrace_syscall \
+ check_initial_reg_state
TARGETS_C_32BIT_ONLY := entry_from_vm86 syscall_arg_fault sigreturn test_syscall_vdso unwind_vdso \
test_FCMOV test_FCOMI test_FISTTP \
ldt_gdt \
@@ -66,3 +67,9 @@ endif
sysret_ss_attrs_64: thunks.S
ptrace_syscall_32: raw_syscall_helper_32.S
test_syscall_vdso_32: thunks_32.S
+
+# check_initial_reg_state is special: it needs a custom entry, and it
+# needs to be static so that its interpreter doesn't destroy its initial
+# state.
+check_initial_reg_state_32: CFLAGS += -Wl,-ereal_start -static
+check_initial_reg_state_64: CFLAGS += -Wl,-ereal_start -static
diff --git a/tools/testing/selftests/x86/check_initial_reg_state.c b/tools/testing/selftests/x86/check_initial_reg_state.c
new file mode 100644
index 0000000..6aaed9b
--- /dev/null
+++ b/tools/testing/selftests/x86/check_initial_reg_state.c
@@ -0,0 +1,109 @@
+/*
+ * check_initial_reg_state.c - check that execve sets the correct state
+ * Copyright (c) 2014-2016 Andrew Lutomirski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#define _GNU_SOURCE
+
+#include <stdio.h>
+
+unsigned long ax, bx, cx, dx, si, di, bp, sp, flags;
+unsigned long r8, r9, r10, r11, r12, r13, r14, r15;
+
+asm (
+ ".pushsection .text\n\t"
+ ".type real_start, @function\n\t"
+ ".global real_start\n\t"
+ "real_start:\n\t"
+#ifdef __x86_64__
+ "mov %rax, ax\n\t"
+ "mov %rbx, bx\n\t"
+ "mov %rcx, cx\n\t"
+ "mov %rdx, dx\n\t"
+ "mov %rsi, si\n\t"
+ "mov %rdi, di\n\t"
+ "mov %rbp, bp\n\t"
+ "mov %rsp, sp\n\t"
+ "mov %r8, r8\n\t"
+ "mov %r9, r9\n\t"
+ "mov %r10, r10\n\t"
+ "mov %r11, r11\n\t"
+ "mov %r12, r12\n\t"
+ "mov %r13, r13\n\t"
+ "mov %r14, r14\n\t"
+ "mov %r15, r15\n\t"
+ "pushfq\n\t"
+ "popq flags\n\t"
+#else
+ "mov %eax, ax\n\t"
+ "mov %ebx, bx\n\t"
+ "mov %ecx, cx\n\t"
+ "mov %edx, dx\n\t"
+ "mov %esi, si\n\t"
+ "mov %edi, di\n\t"
+ "mov %ebp, bp\n\t"
+ "mov %esp, sp\n\t"
+ "pushfl\n\t"
+ "popl flags\n\t"
+#endif
+ "jmp _start\n\t"
+ ".size real_start, . - real_start\n\t"
+ ".popsection");
+
+int main()
+{
+ int nerrs = 0;
+
+ if (sp == 0) {
+ printf("[FAIL]\tTest was built incorrectly\n");
+ return 1;
+ }
+
+ if (ax || bx || cx || dx || si || di || bp
+#ifdef __x86_64__
+ || r8 || r9 || r10 || r11 || r12 || r13 || r14 || r15
+#endif
+ ) {
+ printf("[FAIL]\tAll GPRs except SP should be 0\n");
+#define SHOW(x) printf("\t" #x " = 0x%lx\n", x);
+ SHOW(ax);
+ SHOW(bx);
+ SHOW(cx);
+ SHOW(dx);
+ SHOW(si);
+ SHOW(di);
+ SHOW(bp);
+ SHOW(sp);
+#ifdef __x86_64__
+ SHOW(r8);
+ SHOW(r9);
+ SHOW(r10);
+ SHOW(r11);
+ SHOW(r12);
+ SHOW(r13);
+ SHOW(r14);
+ SHOW(r15);
+#endif
+ nerrs++;
+ } else {
+ printf("[OK]\tAll GPRs except SP are 0\n");
+ }
+
+ if (flags != 0x202) {
+ printf("[FAIL]\tFLAGS is 0x%lx, but it should be 0x202\n", flags);
+ nerrs++;
+ } else {
+ printf("[OK]\tFLAGS is 0x202\n");
+ }
+
+ return nerrs ? 1 : 0;
+}
next prev parent reply other threads:[~2016-01-29 11:35 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-28 23:11 [PATCH v2 00/10] x86: Rewrite 64-bit syscall code Andy Lutomirski
2016-01-28 23:11 ` [PATCH v2 01/10] selftests/x86: Extend Makefile to allow 64-bit-only tests Andy Lutomirski
2016-01-29 11:33 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2016-01-28 23:11 ` [PATCH v2 02/10] selftests/x86: Add check_initial_reg_state Andy Lutomirski
2016-01-29 11:34 ` tip-bot for Andy Lutomirski [this message]
2016-01-28 23:11 ` [PATCH v2 03/10] x86/syscalls: Refactor syscalltbl.sh Andy Lutomirski
2016-01-29 11:34 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2016-01-28 23:11 ` [PATCH v2 04/10] x86/syscalls: Remove __SYSCALL_COMMON and __SYSCALL_X32 Andy Lutomirski
2016-01-29 11:34 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2016-01-29 21:23 ` H. Peter Anvin
2016-01-29 22:19 ` Brian Gerst
2016-01-29 22:23 ` Andy Lutomirski
2016-01-30 9:31 ` Ingo Molnar
2016-01-30 17:35 ` Andy Lutomirski
2016-01-30 21:22 ` H. Peter Anvin
2016-01-30 18:40 ` H. Peter Anvin
2016-01-28 23:11 ` [PATCH v2 05/10] x86/syscalls: Move compat syscall entry handling into syscalltbl.sh Andy Lutomirski
2016-01-29 11:35 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2016-01-28 23:11 ` [PATCH v2 06/10] x86/syscalls: Add syscall entry qualifiers Andy Lutomirski
2016-01-29 11:35 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2016-01-28 23:11 ` [PATCH v2 07/10] x86/entry/64: Always run ptregs-using syscalls on the slow path Andy Lutomirski
2016-01-29 11:35 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2016-01-28 23:11 ` [PATCH v2 08/10] x86/entry/64: Call all native slow-path syscalls with full pt-regs Andy Lutomirski
2016-01-29 11:36 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2016-01-28 23:11 ` [PATCH v2 09/10] x86/entry/64: Stop using int_ret_from_sys_call in ret_from_fork Andy Lutomirski
2016-01-29 11:36 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2016-01-28 23:11 ` [PATCH v2 10/10] x86/entry/64: Migrate the 64-bit syscall slow path to C Andy Lutomirski
2016-01-29 11:36 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-e21d50f3864e2a8995f5d2a41dea3f0fa07758b4@git.kernel.org \
--to=tipbot@zytor.com \
--cc=bp@alien8.de \
--cc=brgerst@gmail.com \
--cc=dvlasenk@redhat.com \
--cc=fweisbec@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=luto@kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome