From: tip-bot for Al Viro <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
viro@ZenIV.linux.org.uk, tglx@linutronix.de,
viro@ZenIV.linux.org.uk, hpa@linux.intel.com
Subject: [tip:x86/smap] Introduce [compat_]save_altstack_ex() to unbreak x86 SMAP
Date: Sun, 1 Sep 2013 14:45:56 -0700 [thread overview]
Message-ID: <tip-es5p6y64if71k8p5u08agv9n@git.kernel.org> (raw)
Commit-ID: bd1c149aa9915b9abb6d83d0f01dfd2ace0680b5
Gitweb: http://git.kernel.org/tip/bd1c149aa9915b9abb6d83d0f01dfd2ace0680b5
Author: Al Viro <viro@ZenIV.linux.org.uk>
AuthorDate: Sun, 1 Sep 2013 20:35:01 +0100
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Sun, 1 Sep 2013 14:16:33 -0700
Introduce [compat_]save_altstack_ex() to unbreak x86 SMAP
For performance reasons, when SMAP is in use, SMAP is left open for an
entire put_user_try { ... } put_user_catch(); block, however, calling
__put_user() in the middle of that block will close SMAP as the
STAC..CLAC constructs intentionally do not nest.
Furthermore, using __put_user() rather than put_user_ex() here is bad
for performance.
Thus, introduce new [compat_]save_altstack_ex() helpers that replace
__[compat_]save_altstack() for x86, being currently the only
architecture which supports put_user_try { ... } put_user_catch().
Reported-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.8+
Link: http://lkml.kernel.org/n/tip-es5p6y64if71k8p5u08agv9n@git.kernel.org
---
arch/x86/ia32/ia32_signal.c | 2 +-
arch/x86/kernel/signal.c | 6 +++---
include/linux/compat.h | 7 +++++++
include/linux/signal.h | 8 ++++++++
4 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index bccfca6..665a730 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -457,7 +457,7 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
else
put_user_ex(0, &frame->uc.uc_flags);
put_user_ex(0, &frame->uc.uc_link);
- err |= __compat_save_altstack(&frame->uc.uc_stack, regs->sp);
+ compat_save_altstack_ex(&frame->uc.uc_stack, regs->sp);
if (ksig->ka.sa.sa_flags & SA_RESTORER)
restorer = ksig->ka.sa.sa_restorer;
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index cf91358..d859eea 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -358,7 +358,7 @@ static int __setup_rt_frame(int sig, struct ksignal *ksig,
else
put_user_ex(0, &frame->uc.uc_flags);
put_user_ex(0, &frame->uc.uc_link);
- err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
+ save_altstack_ex(&frame->uc.uc_stack, regs->sp);
/* Set up to return from userspace. */
restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn);
@@ -423,7 +423,7 @@ static int __setup_rt_frame(int sig, struct ksignal *ksig,
else
put_user_ex(0, &frame->uc.uc_flags);
put_user_ex(0, &frame->uc.uc_link);
- err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
+ save_altstack_ex(&frame->uc.uc_stack, regs->sp);
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
@@ -490,7 +490,7 @@ static int x32_setup_rt_frame(struct ksignal *ksig,
else
put_user_ex(0, &frame->uc.uc_flags);
put_user_ex(0, &frame->uc.uc_link);
- err |= __compat_save_altstack(&frame->uc.uc_stack, regs->sp);
+ compat_save_altstack_ex(&frame->uc.uc_stack, regs->sp);
put_user_ex(0, &frame->uc.uc__pad0);
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 7f0c1dd..ec1aee4 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -669,6 +669,13 @@ asmlinkage long compat_sys_sigaltstack(const compat_stack_t __user *uss_ptr,
int compat_restore_altstack(const compat_stack_t __user *uss);
int __compat_save_altstack(compat_stack_t __user *, unsigned long);
+#define compat_save_altstack_ex(uss, sp) do { \
+ compat_stack_t __user *__uss = uss; \
+ struct task_struct *t = current; \
+ put_user_ex(ptr_to_compat((void __user *)t->sas_ss_sp), &__uss->ss_sp); \
+ put_user_ex(sas_ss_flags(sp), &__uss->ss_flags); \
+ put_user_ex(t->sas_ss_size, &__uss->ss_size); \
+} while (0);
asmlinkage long compat_sys_sched_rr_get_interval(compat_pid_t pid,
struct compat_timespec __user *interval);
diff --git a/include/linux/signal.h b/include/linux/signal.h
index d897484..2ac423b 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -434,6 +434,14 @@ void signals_init(void);
int restore_altstack(const stack_t __user *);
int __save_altstack(stack_t __user *, unsigned long);
+#define save_altstack_ex(uss, sp) do { \
+ stack_t __user *__uss = uss; \
+ struct task_struct *t = current; \
+ put_user_ex((void __user *)t->sas_ss_sp, &__uss->ss_sp); \
+ put_user_ex(sas_ss_flags(sp), &__uss->ss_flags); \
+ put_user_ex(t->sas_ss_size, &__uss->ss_size); \
+} while (0);
+
#ifdef CONFIG_PROC_FS
struct seq_file;
extern void render_sigset_t(struct seq_file *, const char *, sigset_t *);
next reply other threads:[~2013-09-01 21:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-01 21:45 tip-bot for Al Viro [this message]
2013-09-04 1:11 ` Stephen Rothwell
[not found] ` <45ca0da8-f75f-47e8-b310-8b4926b32b69@email.android.com>
2013-09-04 1:55 ` Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-es5p6y64if71k8p5u08agv9n@git.kernel.org \
--to=tipbot@zytor.com \
--cc=hpa@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=viro@ZenIV.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®