From: tip-bot for Rajneesh Bhardwaj <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: hpa@zytor.com, mingo@kernel.org,
andriy.shevchenko@linux.intel.com, rajneesh.bhardwaj@intel.com,
anshuman.gupta@intel.com, tglx@linutronix.de,
alan@linux.intel.com, linux-kernel@vger.kernel.org
Subject: [tip:x86/dma] x86/i8237: Register device based on FADT legacy boot flag
Date: Fri, 27 Apr 2018 08:06:48 -0700 [thread overview]
Message-ID: <tip-f79b1c573cb4dc551919f81ed5797419f6fc1f3a@git.kernel.org> (raw)
In-Reply-To: <1522336015-22994-1-git-send-email-anshuman.gupta@intel.com>
Commit-ID: f79b1c573cb4dc551919f81ed5797419f6fc1f3a
Gitweb: https://git.kernel.org/tip/f79b1c573cb4dc551919f81ed5797419f6fc1f3a
Author: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
AuthorDate: Thu, 29 Mar 2018 20:36:55 +0530
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Fri, 27 Apr 2018 16:44:29 +0200
x86/i8237: Register device based on FADT legacy boot flag
>From Skylake onwards, the platform controller hub (Sunrisepoint PCH) does
not support legacy DMA operations to IO ports 81h-83h, 87h, 89h-8Bh, 8Fh.
Currently this driver registers as syscore ops and its resume function is
called on every resume from S3. On Skylake and Kabylake, this causes a
resume delay of around 100ms due to port IO operations, which is a problem.
This change allows to load the driver only when the platform bios
explicitly supports such devices or has a cut-off date earlier than 2017
due to the following reasons:
- The platforms released before year 2017 have support for the 8237.
(except Sunrisepoint PCH e.g. Skylake)
- Some of the BIOS that were released for platforms (Skylake, Kabylake)
during 2016-17 are buggy. These BIOS do not set/unset the
ACPI_FADT_LEGACY_DEVICES field in FADT table properly based on the
presence or absence of the DMA device.
Very recently, open source system firmware like coreboot started unsetting
ACPI_FADT_LEGACY_DEVICES field in FADT table if the 8237 DMA device is not
present on the PCH.
Please refer to chapter 21 of 6th Generation Intel® Core™ Processor
Platform Controller Hub Family: BIOS Specification.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: rjw@rjwysocki.net
Cc: hpa@zytor.com
Cc: Alan Cox <alan@linux.intel.com>
Link: https://lkml.kernel.org/r/1522336015-22994-1-git-send-email-anshuman.gupta@intel.com
---
arch/x86/include/asm/x86_init.h | 1 +
arch/x86/kernel/i8237.c | 25 +++++++++++++++++++++++++
arch/x86/kernel/platform-quirks.c | 7 ++++++-
3 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index ce8b4da07e35..db98e3ab3295 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -301,5 +301,6 @@ extern struct x86_apic_ops x86_apic_ops;
extern void x86_early_init_platform_quirks(void);
extern void x86_init_noop(void);
extern void x86_init_uint_noop(unsigned int unused);
+extern bool x86_pnpbios_disabled(void);
#endif
diff --git a/arch/x86/kernel/i8237.c b/arch/x86/kernel/i8237.c
index 8eeaa81de066..0a3e70fd00d6 100644
--- a/arch/x86/kernel/i8237.c
+++ b/arch/x86/kernel/i8237.c
@@ -9,10 +9,12 @@
* your option) any later version.
*/
+#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/syscore_ops.h>
#include <asm/dma.h>
+#include <asm/x86_init.h>
/*
* This module just handles suspend/resume issues with the
@@ -49,6 +51,29 @@ static struct syscore_ops i8237_syscore_ops = {
static int __init i8237A_init_ops(void)
{
+ /*
+ * From SKL PCH onwards, the legacy DMA device is removed in which the
+ * I/O ports (81h-83h, 87h, 89h-8Bh, 8Fh) related to it are removed
+ * as well. All removed ports must return 0xff for a inb() request.
+ *
+ * Note: DMA_PAGE_2 (port 0x81) should not be checked for detecting
+ * the presence of DMA device since it may be used by BIOS to decode
+ * LPC traffic for POST codes. Original LPC only decodes one byte of
+ * port 0x80 but some BIOS may choose to enhance PCH LPC port 0x8x
+ * decoding.
+ */
+ if (dma_inb(DMA_PAGE_0) == 0xFF)
+ return -ENODEV;
+
+ /*
+ * It is not required to load this driver as newer SoC may not
+ * support 8237 DMA or bus mastering from LPC. Platform firmware
+ * must announce the support for such legacy devices via
+ * ACPI_FADT_LEGACY_DEVICES field in FADT table.
+ */
+ if (x86_pnpbios_disabled() && dmi_get_bios_year() >= 2017)
+ return -ENODEV;
+
register_syscore_ops(&i8237_syscore_ops);
return 0;
}
diff --git a/arch/x86/kernel/platform-quirks.c b/arch/x86/kernel/platform-quirks.c
index 235fe6008ac8..b348a672f71d 100644
--- a/arch/x86/kernel/platform-quirks.c
+++ b/arch/x86/kernel/platform-quirks.c
@@ -33,9 +33,14 @@ void __init x86_early_init_platform_quirks(void)
x86_platform.set_legacy_features();
}
+bool __init x86_pnpbios_disabled(void)
+{
+ return x86_platform.legacy.devices.pnpbios == 0;
+}
+
#if defined(CONFIG_PNPBIOS)
bool __init arch_pnpbios_disabled(void)
{
- return x86_platform.legacy.devices.pnpbios == 0;
+ return x86_pnpbios_disabled();
}
#endif
next prev parent reply other threads:[~2018-04-27 15:08 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-14 5:17 [PATCH v2] x86: i8237: Register " Rajneesh Bhardwaj
2018-03-14 12:48 ` Andy Shevchenko
2018-03-14 15:07 ` Thomas Gleixner
[not found] ` <20180319104627.GA2959@anshuman.gupta@intel.com>
2018-03-19 10:57 ` Thomas Gleixner
2018-03-22 10:21 ` [PATCH v3] " Anshuman Gupta
2018-03-22 11:05 ` Rajneesh Bhardwaj
2018-03-22 11:17 ` Thomas Gleixner
2018-03-25 11:50 ` Thomas Gleixner
2018-03-26 5:48 ` Rajneesh Bhardwaj
2018-03-26 9:11 ` Thomas Gleixner
2018-03-26 10:34 ` hpa
2018-03-26 10:51 ` Rajneesh Bhardwaj
2018-03-26 14:55 ` Alan Cox
2018-03-29 15:06 ` [PATCH v4] " Anshuman Gupta
2018-04-27 15:06 ` tip-bot for Rajneesh Bhardwaj [this message]
2018-03-26 14:52 ` [PATCH v3] " Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-f79b1c573cb4dc551919f81ed5797419f6fc1f3a@git.kernel.org \
--to=tipbot@zytor.com \
--cc=alan@linux.intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=anshuman.gupta@intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=rajneesh.bhardwaj@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome