mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: Linus Torvalds <torvalds@osdl.org>
Cc: linux-kernel@vger.kernel.org,
	linux1394-devel@lists.sourceforge.net,
	Jody McIntyre <scjody@modernduck.com>
Subject: [PATCH 2.6.17-rc2] ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devices
Date: Sun, 23 Apr 2006 14:06:54 +0200 (CEST)	[thread overview]
Message-ID: <tkrat.2c541162432ec304@s5r6.in-berlin.de> (raw)

Re-enable posted writes for status FIFO.
Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x
and older, this also fixes an interoperability regression since 2.6.16:
http://bugzilla.kernel.org/show_bug.cgi?id=6356
(sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
The ugly hardwired PhyUpperBound which this patch (re-)introduces into
sbp2 will be eliminated by a subsequent patchset (which has already been
sent to linux1394-devel).

Index: linux-2.6.17-rc2/drivers/ieee1394/ohci1394.c
===================================================================
--- linux-2.6.17-rc2.orig/drivers/ieee1394/ohci1394.c	2006-04-22 19:23:46.000000000 +0200
+++ linux-2.6.17-rc2/drivers/ieee1394/ohci1394.c	2006-04-22 19:24:49.000000000 +0200
@@ -553,7 +553,7 @@ static void ohci_initialize(struct ti_oh
 	 * register content.
 	 * To actually enable physical responses is the job of our interrupt
 	 * handler which programs the physical request filter. */
-	reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
+	reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);
 
 	DBGMSG("physUpperBoundOffset=%08x",
 	       reg_read(ohci, OHCI1394_PhyUpperBound));
Index: linux-2.6.17-rc2/drivers/ieee1394/sbp2.c
===================================================================
--- linux-2.6.17-rc2.orig/drivers/ieee1394/sbp2.c	2006-04-22 19:23:46.000000000 +0200
+++ linux-2.6.17-rc2/drivers/ieee1394/sbp2.c	2006-04-22 19:24:50.000000000 +0200
@@ -765,11 +765,16 @@ static struct scsi_id_instance_data *sbp
 
 	/* Register the status FIFO address range. We could use the same FIFO
 	 * for targets at different nodes. However we need different FIFOs per
-	 * target in order to support multi-unit devices. */
+	 * target in order to support multi-unit devices.
+	 * The FIFO is located out of the local host controller's physical range
+	 * but, if possible, within the posted write area. Status writes will
+	 * then be performed as unified transactions. This slightly reduces
+	 * bandwidth usage, and some Prolific based devices seem to require it.
+	 */
 	scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
 			&sbp2_highlevel, ud->ne->host, &sbp2_ops,
 			sizeof(struct sbp2_status_block), sizeof(quadlet_t),
-			~0ULL, ~0ULL);
+			0x010000000000ULL, CSR1212_ALL_SPACE_END);
 	if (!scsi_id->status_fifo_addr) {
 		SBP2_ERR("failed to allocate status FIFO address range");
 		goto failed_alloc;



                 reply	other threads:[~2006-04-23 12:08 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tkrat.2c541162432ec304@s5r6.in-berlin.de \
    --to=stefanr@s5r6.in-berlin.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux1394-devel@lists.sourceforge.net \
    --cc=scjody@modernduck.com \
    --cc=torvalds@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®