From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932409AbWHNRvM (ORCPT ); Mon, 14 Aug 2006 13:51:12 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932501AbWHNRvM (ORCPT ); Mon, 14 Aug 2006 13:51:12 -0400 Received: from einhorn.in-berlin.de ([192.109.42.8]:9911 "EHLO einhorn.in-berlin.de") by vger.kernel.org with ESMTP id S932409AbWHNRvL (ORCPT ); Mon, 14 Aug 2006 13:51:11 -0400 X-Envelope-From: stefanr@s5r6.in-berlin.de Date: Mon, 14 Aug 2006 19:49:55 +0200 (CEST) From: Stefan Richter Subject: [PATCH 2.6.18-rc4-mm1 5/8] ieee1394: sbp2: better handling of transport errors To: linux1394-devel@lists.sourceforge.net cc: Ben Collins , Andrew Morton , linux-kernel@vger.kernel.org In-Reply-To: Message-ID: References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=us-ascii Content-Disposition: INLINE Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org If the target signals a transport failure via status block, complete the request with DID_BUSY to indicate to the SCSI subsystem that the command may succeed when retried. Also log diagnostic information if the status block shows a transport related problem. It may point to hardware faults. Signed-off-by: Stefan Richter --- drivers/ieee1394/sbp2.c | 16 +++++++++++----- drivers/ieee1394/sbp2.h | 6 +++--- 2 files changed, 14 insertions(+), 8 deletions(-) Index: linux/drivers/ieee1394/sbp2.h =================================================================== --- linux.orig/drivers/ieee1394/sbp2.h +++ linux/drivers/ieee1394/sbp2.h @@ -181,11 +181,11 @@ struct sbp2_unrestricted_page_table { #define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff #define STATUS_GET_SRC(value) (((value) >> 30) & 0x3) +#define STATUS_GET_RESP(value) (((value) >> 28) & 0x3) #define STATUS_GET_LEN(value) (((value) >> 24) & 0x7) +#define STATUS_GET_SBP_STATUS(value) (((value) >> 16) & 0xff) #define STATUS_GET_ORB_OFFSET_HI(value) ((value) & 0x0000ffff) -#define STATUS_TEST_D(value) ((value) & 0x08000000) -/* test 'resp' | 'sbp2_status' */ -#define STATUS_TEST_RS(value) ((value) & 0x30ff0000) +#define STATUS_TEST_DEAD(value) ((value) & 0x08000000) /* test 'resp' | 'dead' | 'sbp2_status' */ #define STATUS_TEST_RDS(value) ((value) & 0x38ff0000) Index: linux/drivers/ieee1394/sbp2.c =================================================================== --- linux.orig/drivers/ieee1394/sbp2.c +++ linux/drivers/ieee1394/sbp2.c @@ -2223,28 +2223,34 @@ static int sbp2_handle_status_write(stru spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); if (SCpnt) { - if (STATUS_TEST_RS(sb->ORB_offset_hi_misc)) + u32 h = sb->ORB_offset_hi_misc; + u32 r = STATUS_GET_RESP(h); + + if (r != RESP_STATUS_REQUEST_COMPLETE) { + SBP2_WARN("resp 0x%x, sbp_status 0x%x", + r, STATUS_GET_SBP_STATUS(h)); scsi_status = + r == RESP_STATUS_TRANSPORT_FAILURE ? + SBP2_SCSI_STATUS_BUSY : SBP2_SCSI_STATUS_COMMAND_TERMINATED; + } /* * See if the target stored any scsi status information. */ - if (STATUS_GET_LEN(sb->ORB_offset_hi_misc) > 1) { + if (STATUS_GET_LEN(h) > 1) { SBP2_DEBUG("CHECK CONDITION"); scsi_status = sbp2_status_to_sense_data( (unchar *)sb, SCpnt->sense_buffer); } - /* * Check to see if the dead bit is set. If so, we'll * have to initiate a fetch agent reset. */ - if (STATUS_TEST_D(sb->ORB_offset_hi_misc)) { + if (STATUS_TEST_DEAD(h)) { SBP2_DEBUG("Dead bit set - " "initiating fetch agent reset"); sbp2_agent_reset(scsi_id, 0); } - SBP2_ORB_DEBUG("completing command orb %p", &command->command_orb); }