From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: Clemens Ladisch <clemens@ladisch.de>
Cc: linux1394-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org
Subject: [PATCH update] firewire: ohci: add MSI support
Date: Sat, 5 Jun 2010 12:31:25 +0200 (CEST) [thread overview]
Message-ID: <tkrat.d549e28752108628@s5r6.in-berlin.de> (raw)
In-Reply-To: <4BD5667B.1030900@ladisch.de>
From: Clemens Ladisch <clemens@ladisch.de>
This patch adds support for message-signaled interrupts.
Any native PCI-Express OHCI controller should support MSI, but most are
just PCI cores behind a PCI-E/PCI bridge. The only chips that are known
to claim to support MSI are the Lucent/Agere/LSI FW643 and the VIA
VT6315, none of which I have been able to test.
Due to the high level of trust I have in the competence of these and any
future chip makers, I thought it a good idea to add a disable-MSI quirk.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested Agere FW643 rev 07 [11c1:5901] and JMicron JMB381 [197b:2380].
Added a quirks list entry for the one of them which kept its count of
MSI events consistently at zero.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
drivers/firewire/ohci.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
Index: b/drivers/firewire/ohci.c
===================================================================
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -231,12 +231,14 @@ static inline struct fw_ohci *fw_ohci(st
static char ohci_driver_name[] = KBUILD_MODNAME;
+#define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
#define PCI_DEVICE_ID_TI_TSB12LV22 0x8009
#define QUIRK_CYCLE_TIMER 1
#define QUIRK_RESET_PACKET 2
#define QUIRK_BE_HEADERS 4
#define QUIRK_NO_1394A 8
+#define QUIRK_NO_MSI 16
/* In case of multiple matches in ohci_quirks[], only the first one is used. */
static const struct {
@@ -247,6 +249,7 @@ static const struct {
QUIRK_NO_1394A},
{PCI_VENDOR_ID_TI, PCI_ANY_ID, QUIRK_RESET_PACKET},
{PCI_VENDOR_ID_AL, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
+ {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, QUIRK_NO_MSI},
{PCI_VENDOR_ID_NEC, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
{PCI_VENDOR_ID_VIA, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
{PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, QUIRK_BE_HEADERS},
@@ -260,6 +263,7 @@ MODULE_PARM_DESC(quirks, "Chip quirks (d
", reset packet generation = " __stringify(QUIRK_RESET_PACKET)
", AR/selfID endianess = " __stringify(QUIRK_BE_HEADERS)
", no 1394a enhancements = " __stringify(QUIRK_NO_1394A)
+ ", disable MSI = " __stringify(QUIRK_NO_MSI)
")");
#define OHCI_PARAM_DEBUG_AT_AR 1
@@ -1709,10 +1713,13 @@ static int ohci_enable(struct fw_card *c
reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
+ if (!(ohci->quirks & QUIRK_NO_MSI))
+ pci_enable_msi(dev);
if (request_irq(dev->irq, irq_handler,
- IRQF_SHARED, ohci_driver_name, ohci)) {
- fw_error("Failed to allocate shared interrupt %d.\n",
- dev->irq);
+ pci_dev_msi_enabled(dev) ? 0 : IRQF_SHARED,
+ ohci_driver_name, ohci)) {
+ fw_error("Failed to allocate interrupt %d.\n", dev->irq);
+ pci_disable_msi(dev);
dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
ohci->config_rom, ohci->config_rom_bus);
return -EIO;
@@ -2627,6 +2634,7 @@ static void pci_remove(struct pci_dev *d
context_release(&ohci->at_response_ctx);
kfree(ohci->it_context_list);
kfree(ohci->ir_context_list);
+ pci_disable_msi(dev);
pci_iounmap(dev, ohci->registers);
pci_release_region(dev, 0);
pci_disable_device(dev);
@@ -2644,6 +2652,7 @@ static int pci_suspend(struct pci_dev *d
software_reset(ohci);
free_irq(dev->irq, ohci);
+ pci_disable_msi(dev);
err = pci_save_state(dev);
if (err) {
fw_error("pci_save_state failed\n");
--
Stefan Richter
-=====-==-=- -==- --=-=
http://arcgraph.de/sr/
prev parent reply other threads:[~2010-06-05 10:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4BD5667B.1030900@ladisch.de>
2010-04-26 14:44 ` [PATCH 2/2] " Stefan Richter
2010-04-26 14:55 ` Stefan Richter
2010-04-26 15:56 ` Clemens Ladisch
2010-04-29 5:47 ` Roland Dreier
2010-06-05 10:31 ` Stefan Richter [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tkrat.d549e28752108628@s5r6.in-berlin.de \
--to=stefanr@s5r6.in-berlin.de \
--cc=clemens@ladisch.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux1394-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®