From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: linux1394-devel@lists.sourceforge.net
Cc: Ben Collins <bcollins@ubuntu.com>, linux-kernel@vger.kernel.org
Subject: [PATCH] ieee1394: fix calculation of csr->expire
Date: Sat, 24 Jun 2006 19:36:03 +0200 (CEST) [thread overview]
Message-ID: <tkrat.fcab316d805e0c52@s5r6.in-berlin.de> (raw)
This variant of calculate_expire() is more correct and easier to read.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
drivers/ieee1394/csr.c | 31 ++++++++++---------------------
1 files changed, 10 insertions(+), 21 deletions(-)
Index: linux/drivers/ieee1394/csr.c
===================================================================
--- linux.orig/drivers/ieee1394/csr.c 2006-06-24 18:58:14.000000000 +0200
+++ linux/drivers/ieee1394/csr.c 2006-06-24 19:04:09.000000000 +0200
@@ -17,11 +17,13 @@
*
*/
-#include <linux/string.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/param.h>
#include <linux/spinlock.h>
+#include <linux/string.h>
#include "csr1212.h"
#include "ieee1394_types.h"
@@ -149,31 +151,18 @@ static void host_reset(struct hpsb_host
/*
* HI == seconds (bits 0:2)
- * LO == fraction units of 1/8000 of a second, as per 1394 (bits 19:31)
- *
- * Convert to units and then to HZ, for comparison to jiffies.
- *
- * By default this will end up being 800 units, or 100ms (125usec per
- * unit).
+ * LO == fractions of a second in units of 125usec (bits 19:31)
*
- * NOTE: The spec says 1/8000, but also says we can compute based on 1/8192
- * like CSR specifies. Should make our math less complex.
+ * Convert SPLIT_TIMEOUT to jiffies.
+ * The default and minimum as per 1394a-2000 clause 8.3.2.2.6 is 100ms.
*/
static inline void calculate_expire(struct csr_control *csr)
{
- unsigned long units;
-
- /* Take the seconds, and convert to units */
- units = (unsigned long)(csr->split_timeout_hi & 0x07) << 13;
-
- /* Add in the fractional units */
- units += (unsigned long)(csr->split_timeout_lo >> 19);
-
- /* Convert to jiffies */
- csr->expire = (unsigned long)(units * HZ) >> 13UL;
+ unsigned long usecs =
+ (csr->split_timeout_hi & 0x07) * USEC_PER_SEC +
+ (csr->split_timeout_lo >> 19) * 125L;
- /* Just to keep from rounding low */
- csr->expire++;
+ csr->expire = usecs_to_jiffies(usecs > 100000L ? usecs : 100000L);
HPSB_VERBOSE("CSR: setting expire to %lu, HZ=%u", csr->expire, HZ);
}
reply other threads:[~2006-06-24 17:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tkrat.fcab316d805e0c52@s5r6.in-berlin.de \
--to=stefanr@s5r6.in-berlin.de \
--cc=bcollins@ubuntu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux1394-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®