From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 9 Sep 2001 10:58:35 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 9 Sep 2001 10:58:17 -0400 Received: from natpost.webmailer.de ([192.67.198.65]:46762 "EHLO post.webmailer.de") by vger.kernel.org with ESMTP id ; Sun, 9 Sep 2001 10:58:09 -0400 From: Stefan Hoffmeister To: linux-kernel@vger.kernel.org Subject: hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } Date: Sun, 09 Sep 2001 16:58:25 +0200 Organization: Econos Message-ID: X-Mailer: Forte Agent 1.8/32.548 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, on an Omnibook 800CT (Pentium "Classic" 133, 48 MB) notebook with docking station, running on AC power, I notice sporadic kernel log entries of the form hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x04 { DriveStatusError } These entries, AFAIR, have only appeared since I started experimenting with kernels 2.4.7.SuSE-1 and 2.2.19.SuSE-14 on that system - AFAIR, I never saw that with a 2.2.16 kernel. (I figure the diagnostics were only added post-2.2.16?) Below is a little "timeline" of how this has shown up - I'd almost be prepared to bet that the rexecd invocation triggered this. At the end of my message is the complete output of dmesg. >>From staring a bit at the source code of drivers/ide/hd.c, it is not evident whether this message is something I should worry about or not? IBMs drive fitness test does not report any problems. I figure that lack of IDE DMA support combined with APM (with the disk running continuously and not sleeping) might be a problem? FWIW, the kernel option CONFIG_IDEDISK_MULTI_MODE is selected - but it seems to be meant to address a different set of issues ("set_multmode"). TIA! Stefan ************** Sep 10 10:25:03 xxxxx rpc.statd[572]: Version 0.3.1 Starting Sep 10 10:25:03 xxxxx kernel: svc: unknown version (3) Sep 10 10:30:00 xxxxx kernel: hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } Sep 10 10:30:00 xxxxx kernel: hda: read_intr: error=0x04 { DriveStatusError } Sep 10 10:30:00 xxxxx kernel: hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } Sep 10 10:30:00 xxxxx kernel: hda: read_intr: error=0x04 { DriveStatusError } Sep 10 10:30:01 xxxxx kernel: hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } Sep 10 10:30:01 xxxxx kernel: hda: read_intr: error=0x04 { DriveStatusError } Sep 10 10:30:01 xxxxx kernel: hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } Sep 10 10:30:01 xxxxx kernel: hda: read_intr: error=0x04 { DriveStatusError } Sep 10 10:30:01 xxxxx kernel: ide0: reset: success Sep 10 10:32:03 xxxxx in.rexecd[717]: connect from yyy.yyy.yyy.yyy (yyy.yyy.yyy.yyy) Sep 10 10:32:52 xxxxx in.rexecd[718]: connect from yyy.yyy.yyy.yyy (yyy.yyy.yyy.yyy) Sep 10 10:32:57 xxxxx in.rexecd[719]: connect from yyy.yyy.yyy.yyy (yyy.yyy.yyy.yyy) *********************************************************** Linux version 2.4.7 (me@xxxxx) (gcc version 2.95.3 20010315 (SuSE)) #2 Mon Sep 10 06:01:44 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000003000000 (usable) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) On node 0 totalpages: 12288 zone(0): 4096 pages. zone(1): 8192 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=247 ro root=303 BOOT_FILE=/boot/bz247 Initializing CPU#0 Detected 131.729 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 262.14 BogoMIPS Memory: 46168k/49152k available (1003k kernel code, 2596k reserved, 363k data, 188k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) CPU: Before vendor init, caps: 000001bf 00000000 00000000, vendor = 0 Intel Pentium with F0 0F bug - workaround enabled. Intel old style machine check architecture supported. Intel old style machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 000001bf 00000000 00000000 00000000 CPU: After generic, caps: 000001bf 00000000 00000000 00000000 CPU: Common caps: 000001bf 00000000 00000000 00000000 CPU: Intel Pentium 75 - 200 stepping 0c Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: none PCI: PCI BIOS revision 2.10 entry at 0xeef92, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router VLSI 82C534 [1004/0102] at 00:01.0 got res[10000000:10000fff] for resource 0 of Texas Instruments PCI1130 got res[10001000:10001fff] for resource 0 of Texas Instruments PCI1130 (#2) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled block: queued sectors max/low 30557kB/10185kB, 128 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: IBM-DARA-206000, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: 11733120 sectors (6007 MB) w/418KiB Cache, CHS=776/240/63 Partition check: hda: hda1 hda2 hda3 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others PCI: Found IRQ 15 for device 01:06.0 eth0: OEM i82557/i82558 10/100 Ethernet, 00:08:C7:99:D9:94, IRQ 15. Receiver lock-up bug exists -- enabling work-around. Board assembly 702536-006, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Assigned IRQ 5 for device 00:04.0 PCI: Assigned IRQ 9 for device 00:04.1 Intel PCIC probe: not found. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Yenta IRQ list 0a98, PCI irq5 Socket status: 30000010 Yenta IRQ list 0898, PCI irq9 Socket status: 30000006 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 188k freed Adding Swap: 309952k swap-space (priority -1) ip_conntrack (384 buckets, 3072 max) cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: excluding 0x8e0-0x8e7 cs: IO port probe 0x0100-0x04ff: clean. cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. eth1: 3Com 3c589, io 0x300, irq 3, hw_addr 00:60:97:8A:C8:EB 8K FIFO split 5:3 Rx:Tx, auto xcvr svc: unknown version (3) hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x04 { DriveStatusError } hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x04 { DriveStatusError } hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x04 { DriveStatusError } hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x04 { DriveStatusError } ide0: reset: success