Linux version 2.4.25 (root@bibi) (gcc version 3.3.3 (Debian 20040306)) #1 SMP Tue Mar 9 22:46:19 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000040000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 128MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fb4c0 hm, page 000fb000 reserved twice. hm, page 000fc000 reserved twice. hm, page 000f2000 reserved twice. hm, page 000f3000 reserved twice. On node 0 totalpages: 262144 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32768 pages. ACPI disabled because your bios is from 99 and too old You can enable it with acpi=force Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: 440BX APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 Processor #1 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Kernel command line: root=/dev/hda1 ro console=ttyS0,9600n8 console=tty0 Initializing CPU#0 Detected 501.141 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 999.42 BogoMIPS Memory: 1033608k/1048576k available (1325k kernel code, 14580k reserved, 508k data, 116k init, 131072k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel Pentium III (Katmai) stepping 03 per-CPU timeslice cutoff: 1462.08 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000004 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 999.42 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU1: Intel Pentium III (Katmai) stepping 03 Total of 2 processors activated (1998.84 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 17. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 69 0d 003 03 0 0 0 0 0 1 1 71 0e 003 03 0 0 0 0 0 1 1 79 0f 003 03 0 0 0 0 0 1 1 81 10 003 03 1 1 0 1 0 1 1 89 11 003 03 1 1 0 1 0 1 1 91 12 003 03 1 1 0 1 0 1 1 99 13 003 03 1 1 0 1 0 1 1 A1 14 044 04 1 0 0 0 0 0 2 82 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:18 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:19 IRQ10 -> 0:16 IRQ11 -> 0:17 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 501.1234 MHz. ..... host bus clock speed is 100.2246 MHz. cpu: 0, clocks: 1002246, slice: 334082 CPU0 cpu: 1, clocks: 1002246, slice: 334082 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces Journalled Block Device driver loaded Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10f NET4: Frame Diverter 0.46 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio HPT370: IDE controller at PCI slot 00:12.0 PCI: Enabling device 00:12.0 (0005 -> 0007) HPT370: chipset revision 3 HPT370: not 100% native mode: will probe irqs later HPT37X: using 33MHz PCI clock ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:DMA, hdh:DMA HPT370: IDE controller at PCI slot 00:14.0 PCI: Enabling device 00:14.0 (0005 -> 0007) HPT370: chipset revision 3 HPT370: not 100% native mode: will probe irqs later HPT37X: using 33MHz PCI clock ide4: BM-DMA at 0xe000-0xe007, BIOS settings: hdi:DMA, hdj:DMA ide5: BM-DMA at 0xe008-0xe00f, BIOS settings: hdk:DMA, hdl:DMA hda: IBM-DJNA-371800, ATA DISK drive hdb: IBM-DTTA-371440, ATA DISK drive blk: queue c031bac0, I/O limit 4095Mb (mask 0xffffffff) blk: queue c031bc08, I/O limit 4095Mb (mask 0xffffffff) hdc: ST360021A, ATA DISK drive blk: queue c031bf2c, I/O limit 4095Mb (mask 0xffffffff) hde: IC35L120AVV207-1, ATA DISK drive hdf: IC35L080AVVA07-0, ATA DISK drive blk: queue c031c398, I/O limit 4095Mb (mask 0xffffffff) blk: queue c031c4e0, I/O limit 4095Mb (mask 0xffffffff) hdg: Maxtor 54610H6, ATA DISK drive hdh: Maxtor 6Y160P0, ATA DISK drive blk: queue c031c804, I/O limit 4095Mb (mask 0xffffffff) blk: queue c031c94c, I/O limit 4095Mb (mask 0xffffffff) hdi: WDC WD800BB-00CAA0, ATA DISK drive hdj: IC35L060AVER07-0, ATA DISK drive blk: queue c031cc70, I/O limit 4095Mb (mask 0xffffffff) blk: queue c031cdb8, I/O limit 4095Mb (mask 0xffffffff) hdk: IC35L060AVVA07-0, ATA DISK drive hdl: IC35L060AVER07-0, ATA DISK drive blk: queue c031d0dc, I/O limit 4095Mb (mask 0xffffffff) blk: queue c031d224, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xeff0-0xeff7,0xefe6 on irq 5 ide3 at 0xefa8-0xefaf,0xefe2 on irq 5 ide4 at 0xefa0-0xefa7,0xef7e on irq 9 ide5 at 0xef68-0xef6f,0xef66 on irq 9 hda: attached ide-disk driver. hda: host protected area => 1 hda: 35239680 sectors (18043 MB) w/1966KiB Cache, CHS=2193/255/63, UDMA(33) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 28229040 sectors (14453 MB) w/462KiB Cache, CHS=1757/255/63, UDMA(33) hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63, UDMA(33) hde: attached ide-disk driver. hde: host protected area => 1 hde: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=15017/255/63, UDMA(100) hdf: attached ide-disk driver. hdf: host protected area => 1 hdf: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=159560/16/63, UDMA(100) hdg: attached ide-disk driver. hdg: host protected area => 1 hdg: 90045648 sectors (46103 MB) w/2048KiB Cache, CHS=89331/16/63, UDMA(100) hdh: attached ide-disk driver. hdh: host protected area => 1 hdh: 320173056 sectors (163929 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(100) hdi: attached ide-disk driver. hdi: host protected area => 1 hdi: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100) hdj: attached ide-disk driver. hdj: host protected area => 1 hdj: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=119150/16/63, UDMA(100) hdk: attached ide-disk driver. hdk: host protected area => 1 hdk: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63, UDMA(100) hdl: attached ide-disk driver. hdl: host protected area => 1 hdl: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=119150/16/63, UDMA(100) Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hda3 hda4 hdb: hdb1 hdc: [PTBL] [7297/255/63] hdc1 hde: hde1 hdf: [PTBL] [10011/255/63] hdf1 hdf2 hdg: [PTBL] [5605/255/63] hdg1 hdh: hdh1 hdi: hdi1 hdj: hdj1 hdk: hdk1 hdl: hdl1 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 116k freed Adding Swap: 506036k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal sym53c8xx: at PCI bus 0, device 15, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c810a detected sym53c810a-0: rev 0x12 on pci bus 0 device 15 function 0 irq 10 sym53c810a-0: ID 7, Fast-10, Parity Checking scsi0 : sym53c8xx-1.7.3c-20010512 blk: queue f76c0e18, I/O limit 4095Mb (mask 0xffffffff) sym53c810a-0-<0,*>: FAST-10 SCSI 10.0 MB/s (100.0 ns, offset 8) sym53c810a-0-<0,0>: extraneous data discarded. sym53c810a-0-<0,0>: COMMAND FAILED (89 0) @f77e5000. scsi0 channel 0 : resetting for second half of retries. SCSI bus is being reset for host 0 channel 0. sym53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0 scsi0: device driver called scsi_done() for a synchronous reset. sym53c810a-0-<0,*>: FAST-10 SCSI 10.0 MB/s (100.0 ns, offset 8) sym53c810a-0-<0,0>: extraneous data discarded. sym53c810a-0-<0,0>: COMMAND FAILED (89 0) @f77e5000. Vendor: HP Model: 1.050 GB #A2 Rev: 0180 Type: Direct-Access ANSI SCSI revision: 02 blk: queue f76c0c18, I/O limit 4095Mb (mask 0xffffffff) Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300N Type: Direct-Access ANSI SCSI revision: 02 blk: queue f76c0818, I/O limit 4095Mb (mask 0xffffffff) Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 SCSI device sda: 2051460 512-byte hdwr sectors (1050 MB) sda: sda1 sym53c810a-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100.0 ns, offset 8) SCSI device sdb: 6281856 512-byte hdwr sectors (3216 MB) sdb: sdb1 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 942M agpgart: Detected Intel 440GX chipset agpgart: AGP aperture is 256M @ 0xe0000000 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-proc.o version 2.6.1 (20010830) IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 device-mapper: 4.0.5-ioctl (2003-11-18) initialised: dm@uk.sistina.com md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on device-mapper(254,0), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on device-mapper(254,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:10.0: 3Com PCI 3c905C Tornado at 0xec00. Vers LK1.1.18-ac 00:04:75:d9:6c:f7, IRQ 11 product code 564e rev 00.6 date 11-25-02 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 00:10.0: scatter/gather enabled. h/w checksums enabled divert: allocating divert_blk for eth0 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8192 buckets, 65536 max) - 360 bytes per conntrack