mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Michal Nazarewicz <mina86@mina86.com>
To: Vitaly Andrianov <vitalya@ti.com>,
	m.szyprowski@samsung.com, kyungmin.park@samsung.com,
	arnd@arndb.de, linux-kernel@vger.kernel.org,
	linux-keystone@list.ti.com
Cc: Vitaly Andrianov <vitalya@ti.com>, Cyril Chemparathy <cyril@ti.com>
Subject: Re: [PATCH] drivers: cma: fix addressing on PAE machines
Date: Fri, 30 Nov 2012 16:00:35 +0100	[thread overview]
Message-ID: <xa1tk3t36sq4.fsf@mina86.com> (raw)
In-Reply-To: <1354280283-28365-1-git-send-email-vitalya@ti.com>

[-- Attachment #1: Type: text/plain, Size: 2280 bytes --]


On Fri, Nov 30 2012, Vitaly Andrianov <vitalya@ti.com> wrote:
> This patch fixes a couple of bugs that otherwise impair CMA functionality on
> PAE machines:
>
>   - alignment must be a 64-bit type when running on systems with 64-bit
>     physical addresses.  If this is not the case, the limit calculation thunks
>     allocations down to an address range < 4G.
>
>   - The allocated range check is removed. On 32bit ARM kernel with LPAE
>     enabled the base may be allocated outside the fist 4GB of physical
>     memory (keystone SoC for example).
>
> Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
> Signed-off-by: Cyril Chemparathy <cyril@ti.com>

To be consistent, you should also change the type in:

static long size_cmdline = -1;
static const unsigned long size_bytes = CMA_SIZE_MBYTES * SZ_1M;
static unsigned long __init __maybe_unused cma_early_percent_memory(void)

and in

void __init dma_contiguous_reserve(phys_addr_t limit)

> ---
>  drivers/base/dma-contiguous.c |    6 +-----
>  1 file changed, 1 insertion(+), 5 deletions(-)
>
> diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c
> index 9a14694..7936b2e 100644
> --- a/drivers/base/dma-contiguous.c
> +++ b/drivers/base/dma-contiguous.c
> @@ -234,7 +234,7 @@ int __init dma_declare_contiguous(struct device *dev, unsigned long size,
>  				  phys_addr_t base, phys_addr_t limit)
>  {
>  	struct cma_reserved *r = &cma_reserved[cma_reserved_count];
> -	unsigned long alignment;
> +	phys_addr_t alignment;
>  
>  	pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__,
>  		 (unsigned long)size, (unsigned long)base,
> @@ -271,10 +271,6 @@ int __init dma_declare_contiguous(struct device *dev, unsigned long size,
>  		if (!addr) {
>  			base = -ENOMEM;
>  			goto err;
> -		} else if (addr + size > ~(unsigned long)0) {
> -			memblock_free(addr, size);
> -			base = -EINVAL;
> -			goto err;
>  		} else {
>  			base = addr;
>  		}
> -- 
> 1.7.9.5
>

-- 
Best regards,                                         _     _
.o. | Liege of Serenely Enlightened Majesty of      o' \,=./ `o
..o | Computer Science,  Michał “mina86” Nazarewicz    (o o)
ooo +----<email/xmpp: mpn@google.com>--------------ooO--(_)--Ooo--

[-- Attachment #2.1: Type: text/plain, Size: 0 bytes --]



[-- Attachment #2.2: Type: application/pgp-signature, Size: 835 bytes --]

  reply	other threads:[~2012-11-30 15:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-30 12:58 Vitaly Andrianov
2012-11-30 15:00 ` Michal Nazarewicz [this message]
2012-11-30 20:33   ` Andrianov, Vitaly
2012-11-30 20:47     ` Michal Nazarewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=xa1tk3t36sq4.fsf@mina86.com \
    --to=mina86@mina86.com \
    --cc=arnd@arndb.de \
    --cc=cyril@ti.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-keystone@list.ti.com \
    --cc=m.szyprowski@samsung.com \
    --cc=vitalya@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome