From: mturquette@baylibre.com (Michael Turquette)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 0/7] Add support for AmLogic GXBB clock controller
Date: Thu, 9 Jun 2016 17:32:47 -0700 [thread overview]
Message-ID: <1465518774-26924-1-git-send-email-mturquette@baylibre.com> (raw)
This series is based on the AmLogic Meson8b rewrite/cleanup[0]. The
AmLogic GXBB is an ARMv8-based SoC, fed by a 24MHZ xtal, and it provides
several PLLs, muxes dividers and gates to drive CPUs and peripherals.
While based on the Meson8b clock controller driver, this series adds
supports for Multi-phase Locked Loops (mpll) and support for PLLs with
fractional rates.
This series introduces the clock controller driver for the gxbb,
including the DT binding description and accompanying change in the gxbb
dtsi. Only three clocks are exposed via the headers in the dt-bindings
include-chroot. More can be added later, but since these values
represent an ABI I wanted to start small. I'm not sure about the names
for the gate clocks, so I especially tried to avoid putting those in the
binding (with the exception of the Ethernet gate, which Kevin has needed
for a while).
Notably missing from this driver are the branch clocks (e.g. the mess of
muxes and dividers that come after the PLLs and MPLLs). I could have
guessed how things were wired up from the resources available to me, but
I'm hoping to get some improved documentation soon and then I'll go back
and fill them in.
[0] http://lkml.kernel.org/g/1465518467-23939-1-git-send-email-mturquette at baylibre.com
Michael Turquette (7):
clk: meson: add peripheral gate macro
clk: meson: add mpll support
clk: meson: fractional pll support
clk: gxbb: Document bindings for the GXBB clock controller
clk: gxbb: add AmLogic GXBB clk controller driver
arm64: amlogic: select gxbb clk driver
arm64: dts: gxbb clock controller
.../bindings/clock/amlogic,gxbb-clkc.txt | 36 +
arch/arm64/Kconfig.platforms | 2 +
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +
drivers/clk/meson/Kconfig | 7 +
drivers/clk/meson/Makefile | 3 +-
drivers/clk/meson/clk-mpll.c | 94 ++
drivers/clk/meson/clk-pll.c | 32 +-
drivers/clk/meson/clkc.h | 39 +
drivers/clk/meson/gxbb.c | 954 +++++++++++++++++++++
drivers/clk/meson/gxbb.h | 271 ++++++
include/dt-bindings/clock/gxbb-clkc.h | 12 +
11 files changed, 1454 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
create mode 100644 drivers/clk/meson/clk-mpll.c
create mode 100644 drivers/clk/meson/gxbb.c
create mode 100644 drivers/clk/meson/gxbb.h
create mode 100644 include/dt-bindings/clock/gxbb-clkc.h
--
2.1.4
next reply other threads:[~2016-06-10 0:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-10 0:32 Michael Turquette [this message]
2016-06-10 0:32 ` [PATCH 1/7] clk: meson: add peripheral gate macro Michael Turquette
2016-06-10 0:32 ` [PATCH 2/7] clk: meson: add mpll support Michael Turquette
2016-06-10 0:32 ` [PATCH 3/7] clk: meson: fractional pll support Michael Turquette
2016-06-10 0:32 ` [PATCH 4/7] clk: gxbb: Document bindings for the GXBB clock controller Michael Turquette
2016-06-10 0:32 ` [PATCH 5/7] clk: gxbb: add AmLogic GXBB clk controller driver Michael Turquette
2016-06-10 0:32 ` [PATCH 6/7] arm64: amlogic: select gxbb clk driver Michael Turquette
2016-06-10 0:32 ` [PATCH 7/7] arm64: dts: gxbb clock controller Michael Turquette
2016-06-14 19:01 ` Kevin Hilman
2016-06-15 1:41 ` Michael Turquette
2016-06-10 9:12 ` [PATCH 0/7] Add support for AmLogic GXBB " Neil Armstrong
2016-06-13 17:55 ` Kevin Hilman
2016-06-14 5:02 ` Neil Armstrong
2016-06-14 18:59 ` Kevin Hilman
2016-06-15 1:41 ` Michael Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465518774-26924-1-git-send-email-mturquette@baylibre.com \
--to=mturquette@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®