From: mturquette@baylibre.com (Michael Turquette)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 3/7] clk: meson: fractional pll support
Date: Thu, 9 Jun 2016 17:32:50 -0700 [thread overview]
Message-ID: <1465518774-26924-4-git-send-email-mturquette@baylibre.com> (raw)
In-Reply-To: <1465518774-26924-1-git-send-email-mturquette@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
---
drivers/clk/meson/clk-pll.c | 32 ++++++++++++++++++++++++++++++--
drivers/clk/meson/clkc.h | 15 +++++++++++++++
2 files changed, 45 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 60c6b94..4adc1e8 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -53,7 +53,7 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
struct parm *p;
unsigned long parent_rate_mhz = parent_rate / 1000000;
unsigned long rate_mhz;
- u16 n, m, od;
+ u16 n, m, frac = 0, od, od2 = 0;
u32 reg;
p = &pll->n;
@@ -68,7 +68,21 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
reg = readl(pll->base + p->reg_off);
od = PARM_GET(p->width, p->shift, reg);
- rate_mhz = (parent_rate_mhz * m / n) >> od;
+ p = &pll->od2;
+ if (p->width) {
+ reg = readl(pll->base + p->reg_off);
+ od2 = PARM_GET(p->width, p->shift, reg);
+ }
+
+ p = &pll->frac;
+ if (p->width) {
+ reg = readl(pll->base + p->reg_off);
+ frac = PARM_GET(p->width, p->shift, reg);
+ rate_mhz = (parent_rate_mhz * m + \
+ (parent_rate_mhz * frac >> 12)) * 2 / n;
+ rate_mhz = rate_mhz >> od >> od2;
+ } else
+ rate_mhz = (parent_rate_mhz * m / n) >> od >> od2;
return rate_mhz * 1000000;
}
@@ -155,6 +169,20 @@ static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
reg = PARM_SET(p->width, p->shift, reg, rate_set->od);
writel(reg, pll->base + p->reg_off);
+ p = &pll->od2;
+ if (p->width) {
+ reg = readl(pll->base + p->reg_off);
+ reg = PARM_SET(p->width, p->shift, reg, rate_set->od2);
+ writel(reg, pll->base + p->reg_off);
+ }
+
+ p = &pll->frac;
+ if (p->width) {
+ reg = readl(pll->base + p->reg_off);
+ reg = PARM_SET(p->width, p->shift, reg, rate_set->frac);
+ writel(reg, pll->base + p->reg_off);
+ }
+
p = &pll->n;
ret = meson_clk_pll_wait_lock(pll, p);
if (ret) {
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 73f0146..53326c3 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -40,7 +40,10 @@ struct pll_rate_table {
u16 m;
u16 n;
u16 od;
+ u16 od2;
+ u16 frac;
};
+
#define PLL_RATE(_r, _m, _n, _od) \
{ \
.rate = (_r), \
@@ -49,12 +52,24 @@ struct pll_rate_table {
.od = (_od), \
} \
+#define PLL_FRAC_RATE(_r, _m, _n, _od, _od2, _frac) \
+ { \
+ .rate = (_r), \
+ .m = (_m), \
+ .n = (_n), \
+ .od = (_od), \
+ .od2 = (_od2), \
+ .frac = (_frac), \
+ } \
+
struct meson_clk_pll {
struct clk_hw hw;
void __iomem *base;
struct parm m;
struct parm n;
+ struct parm frac;
struct parm od;
+ struct parm od2;
const struct pll_rate_table *rate_table;
unsigned int rate_count;
spinlock_t *lock;
--
2.1.4
next prev parent reply other threads:[~2016-06-10 0:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-10 0:32 [PATCH 0/7] Add support for AmLogic GXBB clock controller Michael Turquette
2016-06-10 0:32 ` [PATCH 1/7] clk: meson: add peripheral gate macro Michael Turquette
2016-06-10 0:32 ` [PATCH 2/7] clk: meson: add mpll support Michael Turquette
2016-06-10 0:32 ` Michael Turquette [this message]
2016-06-10 0:32 ` [PATCH 4/7] clk: gxbb: Document bindings for the GXBB clock controller Michael Turquette
2016-06-10 0:32 ` [PATCH 5/7] clk: gxbb: add AmLogic GXBB clk controller driver Michael Turquette
2016-06-10 0:32 ` [PATCH 6/7] arm64: amlogic: select gxbb clk driver Michael Turquette
2016-06-10 0:32 ` [PATCH 7/7] arm64: dts: gxbb clock controller Michael Turquette
2016-06-14 19:01 ` Kevin Hilman
2016-06-15 1:41 ` Michael Turquette
2016-06-10 9:12 ` [PATCH 0/7] Add support for AmLogic GXBB " Neil Armstrong
2016-06-13 17:55 ` Kevin Hilman
2016-06-14 5:02 ` Neil Armstrong
2016-06-14 18:59 ` Kevin Hilman
2016-06-15 1:41 ` Michael Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465518774-26924-4-git-send-email-mturquette@baylibre.com \
--to=mturquette@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®