From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [RFC PATCH v2 9/9] ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes
Date: Tue, 21 Jun 2016 12:02:54 +0200 [thread overview]
Message-ID: <1466503374-28841-10-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1466503374-28841-1-git-send-email-narmstrong@baylibre.com>
Add the vcpu DVFS clock, the SCPU shared SRAM and the SCPI sensors nodes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 36 +++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 913ba86..0f2596e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -61,6 +61,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
+ clocks = <&scpi_dvfs 0>;
};
cpu1: cpu at 1 {
@@ -68,6 +69,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
+ clocks = <&scpi_dvfs 0>;
};
cpu2: cpu at 2 {
@@ -75,6 +77,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
+ clocks = <&scpi_dvfs 0>;
};
cpu3: cpu at 3 {
@@ -82,6 +85,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
+ clocks = <&scpi_dvfs 0>;
};
};
@@ -99,6 +103,28 @@
method = "smc";
};
+ scpi {
+ compatible = "amlogic,meson-gxbb-scpi";
+ mboxes = <&mailbox 0 &mailbox 1>;
+ shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+ clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks at 0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>;
+ clock-output-names = "vcpu";
+ };
+ };
+
+ scpi_sensors: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
@@ -131,6 +157,16 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0xc8000000 0x14000>;
+
+ cpu_scp_lpri: scp-shmem at 0 {
+ compatible = "amlogic,meson-gxbb-scp-shmem";
+ reg = <0x13000 0x400>;
+ };
+
+ cpu_scp_hpri: scp-shmem at 200 {
+ compatible = "amlogic,meson-gxbb-scp-shmem";
+ reg = <0x13400 0x400>;
+ };
};
cbus: cbus at c1100000 {
--
2.7.0
next prev parent reply other threads:[~2016-06-21 10:02 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-21 10:02 [RFC PATCH v2 0/9] scpi: Add SCPI registry to handle legacy protocol Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 1/9] mailbox: Add Amlogic Meson Message-Handling-Unit Neil Armstrong
2016-06-22 4:31 ` Jassi Brar
2016-06-23 12:50 ` Neil Armstrong
2016-06-23 15:46 ` Neil Armstrong
2016-06-25 17:50 ` Jassi Brar
2016-06-28 14:00 ` Neil Armstrong
2016-06-28 15:06 ` Jassi Brar
2016-07-04 15:25 ` Jassi Brar
2016-07-04 15:38 ` Jassi Brar
2016-07-06 13:17 ` Neil Armstrong
2016-07-07 4:27 ` Jassi Brar
2016-06-21 10:02 ` [RFC PATCH v2 2/9] dt-bindings: mailbox: Add Amlogic Meson MHU Bindings Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 3/9] ARM64: dts: meson-gxbb: Add Meson MHU Node Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 4/9] firmware: Add a SCPI registry to handle multiple implementations Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 5/9] firmware: scpi: Switch arm_scpi to use new registry Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 6/9] firmware: Add legacy SCPI protocol driver Neil Armstrong
2016-06-30 10:53 ` Sudeep Holla
2016-07-19 9:17 ` Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 7/9] dt-bindings: arm: Update arm, scpi bindings with Meson GXBB SCPI Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 8/9] ARM64: dts: meson-gxbb: Add SRAM node Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong [this message]
2016-06-22 2:54 ` [RFC PATCH v2 0/9] scpi: Add SCPI registry to handle legacy protocol Frank Wang
2016-06-23 12:45 ` Neil Armstrong
2016-06-24 2:31 ` Frank Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466503374-28841-10-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®